From mboxrd@z Thu Jan 1 00:00:00 1970 From: notasas@gmail.com (Grazvydas Ignotas) Date: Sun, 6 May 2012 02:56:52 +0300 Subject: [PATCH] ARM: OMAP2+: remove incorrect irq_chip ack field Message-ID: <1336262212-4455-1-git-send-email-notasas@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Each irq_chip for the main interrupt controller has offsets set for irq masking registers, which added to respective base results in a pointer to appropriate hardware register. However this is not correct for INTC_CONTROL as there is only one INTC_CONTROL register. This does not cause problems because generic ack code is never called, but remove this assignment to avoid confusion. Signed-off-by: Grazvydas Ignotas --- arch/arm/mach-omap2/irq.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 65f0d25..c11e8a8 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,7 +149,6 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; - ct->regs.ack = INTC_CONTROL; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, -- 1.7.0.4