From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Sun, 6 May 2012 23:34:56 +0800 Subject: [PATCH 0/9] Enable pinctrl support for mach-mxs Message-ID: <1336318505-27043-1-git-send-email-shawn.guo@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org With pinctrl-mxs driver (DT only) applied on pinctrl tree, the mxs device tree conversion can start basing on that support. This series adopts pinctrl support for mxs device drivers with a dummy pinctrl state provided for non-DT boot, so that the pinctrl call in the device drivers will be bypassed for non-DT probe while it starts working for DT probe. To ease the merge process, I would like to ask Arnd and Olof to pull pinctrl tree as a dependency in arm-soc and have this series go through arm-soc. Regards, Shawn Shawn Guo (9): ARM: mxs: enable pinctrl dummy states serial: amba-pl011: adopt pinctrl support serial: mxs-auart: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support i2c: mxs: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support video: mxsfb: adopt pinctrl support ARM: mxs: enable pinctrl support arch/arm/Kconfig | 1 + arch/arm/mach-mxs/Kconfig | 2 ++ arch/arm/mach-mxs/include/mach/common.h | 2 ++ arch/arm/mach-mxs/mach-apx4devkit.c | 2 ++ arch/arm/mach-mxs/mach-m28evk.c | 2 ++ arch/arm/mach-mxs/mach-mx23evk.c | 2 ++ arch/arm/mach-mxs/mach-mx28evk.c | 2 ++ arch/arm/mach-mxs/mach-stmp378x_devb.c | 2 ++ arch/arm/mach-mxs/mach-tx28.c | 2 ++ arch/arm/mach-mxs/mm.c | 11 +++++++++++ drivers/i2c/busses/i2c-mxs.c | 6 ++++++ drivers/mmc/host/mxs-mmc.c | 8 ++++++++ drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 +++++++++ drivers/tty/serial/amba-pl011.c | 8 ++++++++ drivers/tty/serial/mxs-auart.c | 8 ++++++++ drivers/video/mxsfb.c | 9 +++++++++ sound/soc/mxs/mxs-saif.c | 8 ++++++++ 17 files changed, 84 insertions(+), 0 deletions(-) -- 1.7.5.4