From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/10] mmc: mxs-mmc: use devm_* helper to make cleanup simpler
Date: Mon, 7 May 2012 22:43:07 +0800 [thread overview]
Message-ID: <1336401793-13753-6-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1336401793-13753-1-git-send-email-shawn.guo@linaro.org>
Use devm_request_and_ioremap and devm_request_irq helpers to clean up
the code a little bit.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
drivers/mmc/host/mxs-mmc.c | 40 +++++++++-------------------------------
1 files changed, 9 insertions(+), 31 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index c70c7c7..1a8ba314 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -146,8 +146,6 @@ struct mxs_mmc_host {
struct mmc_data *data;
void __iomem *base;
- int irq;
- struct resource *res;
struct resource *dma_res;
struct clk *clk;
unsigned int clk_rate;
@@ -695,7 +693,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
{
struct mxs_mmc_host *host;
struct mmc_host *mmc;
- struct resource *iores, *dmares, *r;
+ struct resource *iores, *dmares;
struct mxs_mmc_platform_data *pdata;
struct pinctrl *pinctrl;
int ret = 0, irq_err, irq_dma;
@@ -708,28 +706,20 @@ static int mxs_mmc_probe(struct platform_device *pdev)
if (!iores || !dmares || irq_err < 0 || irq_dma < 0)
return -EINVAL;
- r = request_mem_region(iores->start, resource_size(iores), pdev->name);
- if (!r)
- return -EBUSY;
-
mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
- if (!mmc) {
- ret = -ENOMEM;
- goto out_release_mem;
- }
+ if (!mmc)
+ return -ENOMEM;
host = mmc_priv(mmc);
- host->base = ioremap(r->start, resource_size(r));
+ host->base = devm_request_and_ioremap(&pdev->dev, iores);
if (!host->base) {
- ret = -ENOMEM;
+ ret = -EADDRNOTAVAIL;
goto out_mmc_free;
}
host->devid = pdev->id_entry->driver_data;
host->mmc = mmc;
- host->res = r;
host->dma_res = dmares;
- host->irq = irq_err;
host->sdio_irq_en = 0;
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
@@ -741,7 +731,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
- goto out_iounmap;
+ goto out_mmc_free;
}
clk_prepare_enable(host->clk);
@@ -782,7 +772,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mmc);
- ret = request_irq(host->irq, mxs_mmc_irq_handler, 0, DRIVER_NAME, host);
+ ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0,
+ DRIVER_NAME, host);
if (ret)
goto out_free_dma;
@@ -790,26 +781,20 @@ static int mxs_mmc_probe(struct platform_device *pdev)
ret = mmc_add_host(mmc);
if (ret)
- goto out_free_irq;
+ goto out_free_dma;
dev_info(mmc_dev(host->mmc), "initialized\n");
return 0;
-out_free_irq:
- free_irq(host->irq, host);
out_free_dma:
if (host->dmach)
dma_release_channel(host->dmach);
out_clk_put:
clk_disable_unprepare(host->clk);
clk_put(host->clk);
-out_iounmap:
- iounmap(host->base);
out_mmc_free:
mmc_free_host(mmc);
-out_release_mem:
- release_mem_region(iores->start, resource_size(iores));
return ret;
}
@@ -817,12 +802,9 @@ static int mxs_mmc_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct mxs_mmc_host *host = mmc_priv(mmc);
- struct resource *res = host->res;
mmc_remove_host(mmc);
- free_irq(host->irq, host);
-
platform_set_drvdata(pdev, NULL);
if (host->dmach)
@@ -831,12 +813,8 @@ static int mxs_mmc_remove(struct platform_device *pdev)
clk_disable_unprepare(host->clk);
clk_put(host->clk);
- iounmap(host->base);
-
mmc_free_host(mmc);
- release_mem_region(res->start, resource_size(res));
-
return 0;
}
--
1.7.5.4
next prev parent reply other threads:[~2012-05-07 14:43 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 14:43 [PATCH 00/10] Add device tree support for mxs-mmc Shawn Guo
2012-05-07 14:43 ` [PATCH 01/10] mmc: mxs-mmc: use global stmp_device functionality Shawn Guo
2012-05-07 23:41 ` Marek Vasut
2012-05-07 14:43 ` [PATCH 02/10] mmc: mxs-mmc: let ssp_is_old take host as parameter Shawn Guo
2012-05-07 23:43 ` Marek Vasut
2012-05-08 14:32 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 03/10] mmc: mxs-mmc: get rid of the use of cpu_is_xxx Shawn Guo
2012-05-07 23:46 ` Marek Vasut
2012-05-08 14:35 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 04/10] mmc: mxs-mmc: move header from mach into linux folder Shawn Guo
2012-05-07 23:47 ` Marek Vasut
2012-05-07 14:43 ` Shawn Guo [this message]
2012-05-07 23:49 ` [PATCH 05/10] mmc: mxs-mmc: use devm_* helper to make cleanup simpler Marek Vasut
2012-05-08 14:38 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 06/10] mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host Shawn Guo
2012-05-07 23:51 ` Marek Vasut
2012-05-07 14:43 ` [PATCH 07/10] mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host Shawn Guo
2012-05-07 23:53 ` Marek Vasut
2012-05-08 14:40 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 08/10] mmc: mxs-mmc: add device tree support Shawn Guo
2012-05-07 23:58 ` Marek Vasut
2012-05-08 14:43 ` Shawn Guo
2012-05-12 14:44 ` Chris Ball
2012-05-13 0:03 ` Shawn Guo
2012-05-13 0:11 ` Chris Ball
2012-05-13 0:21 ` Shawn Guo
2012-05-13 0:29 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 09/10] ARM: dts: enable mmc for imx23-evk Shawn Guo
2012-05-07 14:43 ` [PATCH 10/10] ARM: dts: enable mmc for imx28-evk Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336401793-13753-6-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).