From: r.sricharan@ti.com (R Sricharan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] ARM: OMAP2+: Move the stubbed prm and cm functions to prcm.c file and make them __weak.
Date: Thu, 10 May 2012 22:36:53 +0530 [thread overview]
Message-ID: <1336669615-16454-3-git-send-email-r.sricharan@ti.com> (raw)
In-Reply-To: <1336669615-16454-1-git-send-email-r.sricharan@ti.com>
Some prm and cm registers read/write and status functions
are built only for some custom OMAP2+ builds and are stubbed
in header files for other builds under ifdef statements.
But this results in adding new CONFIG_ARCH_OMAPXXX
checks when SOCs are added in the future. So move them
to a common place for OMAP2+ and make them 'weak' implementations.
This way no new ifdefs would be required in the future and also
cleans up the existing code.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
---
arch/arm/mach-omap2/cminst44xx.h | 25 ------------
arch/arm/mach-omap2/prcm.c | 77 ++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prm2xxx_3xxx.h | 65 ------------------------------
3 files changed, 77 insertions(+), 90 deletions(-)
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index a018a73..d69fdef 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -16,38 +16,13 @@ extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
-
extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-
-# ifdef CONFIG_ARCH_OMAP4
extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
-
extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
-
-# else
-
-static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
- return 0;
-}
-
-static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
- s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
-}
-
-# endif
-
/*
* In an ideal world, we would not export these low-level functions,
* but this will probably take some time to fix properly
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 480f40a..9bc3f5d 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -164,3 +164,80 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
omap_cm_base_init();
}
}
+
+/*
+ * Stubbed functions so that common files
+ * continue to build when custom builds are used
+ */
+u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+
+void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+}
+u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
+ s16 module, s16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
+ u8 st_shift)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+
+int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+ return 0;
+}
+
+void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+ s16 cdoffs, u16 clkctrl_offs)
+{
+}
+
+void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+ u16 clkctrl_offs)
+{
+}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 70ac2a1..f7bb57f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -228,68 +228,6 @@
#ifndef __ASSEMBLER__
-/*
- * Stub omap2xxx/omap3xxx functions so that common files
- * continue to build when custom builds are used
- */
-#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \
- defined(CONFIG_ARCH_OMAP3))
-static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
-}
-static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
- s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
- u8 st_shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function and "
- "not suppose to be used on omap4\n");
- return 0;
-}
-#else
/* Power/reset management domain register get/set */
extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
@@ -320,9 +258,6 @@ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
extern void omap3xxx_prm_ocp_barrier(void);
extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-#endif /* CONFIG_ARCH_OMAP4 */
-
#endif
/*
--
1.7.1
next prev parent reply other threads:[~2012-05-10 17:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-10 17:06 [PATCH 0/4] ARM: OMAP2+: Misc cleanup part2 R Sricharan
2012-05-10 17:06 ` [PATCH 1/4] ARM: OMAP2+: Introduce CONFIG_SOC_HAS_OMAP_DPLL macro R Sricharan
2012-05-10 18:26 ` Hiremath, Vaibhav
2012-05-11 6:16 ` R, Sricharan
2012-05-11 6:22 ` Hiremath, Vaibhav
2012-05-11 6:23 ` R, Sricharan
2012-05-10 17:06 ` R Sricharan [this message]
2012-05-10 17:41 ` [PATCH 2/4] ARM: OMAP2+: Move the stubbed prm and cm functions to prcm.c file and make them __weak Paul Walmsley
2012-05-10 17:44 ` Sricharan R
2012-06-14 11:56 ` R, Sricharan
2012-06-28 11:58 ` R, Sricharan
2012-07-04 15:19 ` Paul Walmsley
2012-07-04 15:25 ` R, Sricharan
2012-05-10 17:06 ` [PATCH 3/4] ARM: OMAP2+: Move stubbed secure_sram_reserve function to a common.c and call it __weak R Sricharan
2012-05-10 17:06 ` [PATCH 4/4] ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme R Sricharan
2012-05-10 17:17 ` [PATCH 0/4] ARM: OMAP2+: Misc cleanup part2 Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336669615-16454-3-git-send-email-r.sricharan@ti.com \
--to=r.sricharan@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).