From: marcus.folkesson@gmail.com (Marcus Folkesson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: davinci: turn off DDR PHY when entering deep sleep
Date: Thu, 10 May 2012 19:52:32 +0200 [thread overview]
Message-ID: <1336672352-23191-1-git-send-email-marcus.folkesson@gmail.com> (raw)
In-Reply-To: <marcus.folkesson@gmail.com>
Deepsleep is the most power saving state on the davinci-platform.
The DDR PHY consumes about 25mW and should be turned off in this low
power state.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
arch/arm/mach-davinci/include/mach/memory.h | 2 ++
arch/arm/mach-davinci/sleep.S | 10 ++++++++++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 7873194..1b1b8ac 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -36,6 +36,8 @@
#define DDR2_MCLKSTOPEN_BIT BIT(30)
#define DDR2_LPMODEN_BIT BIT(31)
+#define DDR2_DRPHYC1R_OFFSET 0xe4
+#define DDR_PWRDNEN_BIT BIT(6)
/*
* Increase size of DMA-consistent memory region
*/
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 5f1e045..30713b2 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -57,6 +57,11 @@ ENTRY(davinci_cpu_suspend)
ldmia r0, {r0-r4}
+ /* Turn PHY off */
+ ldr ip, [r0, #DDR2_DRPHYC1R_OFFSET]
+ orr ip, ip, #DDR_PWRDNEN_BIT
+ str ip, [r0, #DDR2_DRPHYC1R_OFFSET]
+
/*
* Switch DDR to self-refresh mode.
*/
@@ -171,6 +176,11 @@ ENTRY(davinci_cpu_suspend)
bic ip, ip, #DDR2_LPMODEN_BIT
str ip, [r0, #DDR2_SDRCR_OFFSET]
+ /* Turn PHY on */
+ ldr ip, [r0, #DDR2_DRPHYC1R_OFFSET]
+ bic ip, ip, #DDR_PWRDNEN_BIT
+ str ip, [r0, #DDR2_DRPHYC1R_OFFSET]
+
/* Restore registers and return */
ldmfd sp!, {r0-r12, pc}
--
1.7.5.4
next reply other threads:[~2012-05-10 17:52 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <marcus.folkesson@gmail.com>
2012-05-10 17:52 ` Marcus Folkesson [this message]
2012-05-21 17:38 ` [PATCH] ARM: davinci: turn off DDR PHY when entering deep sleep Sekhar Nori
2012-05-24 11:46 ` Marcus Folkesson
2012-05-24 17:41 ` Sekhar Nori
2018-02-09 19:27 ` [PATCH 0/7] watchdog: make use of timeout-secs Marcus Folkesson
2018-02-09 19:27 ` [PATCH 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree Marcus Folkesson
2018-02-09 19:32 ` Marcus Folkesson
2018-02-09 22:38 ` Guenter Roeck
2018-02-11 17:38 ` [1/7] " Guenter Roeck
2018-02-09 19:27 ` [PATCH 2/7] watchdog: sunxi: allow setting timeout " Marcus Folkesson
2018-02-09 22:39 ` Guenter Roeck
2018-02-09 19:27 ` [PATCH 3/7] watchdog: sirfsoc: " Marcus Folkesson
2018-02-09 22:40 ` Guenter Roeck
2018-02-09 19:27 ` [PATCH 4/7] watchdog: pnx4008: make use of timeout-secs provided " Marcus Folkesson
2018-02-09 22:41 ` Guenter Roeck
2018-02-09 22:43 ` Guenter Roeck
2018-02-09 19:27 ` [PATCH 5/7] watchdog: mtk: allow setting timeout " Marcus Folkesson
2018-02-09 22:43 ` Guenter Roeck
2018-02-09 19:27 ` [PATCH 6/7] watchdog: meson: " Marcus Folkesson
2018-02-09 22:48 ` Guenter Roeck
2018-02-09 23:19 ` Alexandre Belloni
2018-02-10 0:04 ` Guenter Roeck
2018-02-09 19:27 ` [PATCH 7/7] watchdog: coh901327: make use of timeout-secs provided " Marcus Folkesson
2018-02-09 22:52 ` Guenter Roeck
2018-02-10 8:54 ` Marcus Folkesson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336672352-23191-1-git-send-email-marcus.folkesson@gmail.com \
--to=marcus.folkesson@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).