From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] ARM: clps711x: Added missing register definitions
Date: Mon, 14 May 2012 21:46:09 +0400 [thread overview]
Message-ID: <1337017571-16208-2-git-send-email-shc_work@mail.ru> (raw)
In-Reply-To: <1337017571-16208-1-git-send-email-shc_work@mail.ru>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/mach-clps711x/include/mach/clps711x.h | 46 ++++++++++++++++++++++++
1 files changed, 46 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
index 3e07591..1dd806f 100644
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -87,6 +87,14 @@
#define LEDFLSH (0x22c0)
#define SDCONF (0x2300)
#define SDRFPR (0x2340)
+#define UNIQID (0x2440)
+#define DAI64FS (0x2600)
+#define PLLW (0x2610)
+#define PLLR (0xa5a8)
+#define RANDID0 (0x2700)
+#define RANDID1 (0x2704)
+#define RANDID2 (0x2708)
+#define RANDID3 (0x270c)
/* common bits: SYSCON1 / SYSCON2 */
#define SYSCON_UARTEN (1 << 8)
@@ -134,6 +142,8 @@
#define SYSFLG1_CTXFF (1 << 25)
#define SYSFLG1_SSIBUSY (1 << 26)
#define SYSFLG1_ID (1 << 29)
+#define SYSFLG1_VERID(x) (((x) >> 30) & 3)
+#define SYSFLG1_VERID_MASK (3 << 30)
#define SYSFLG2_SSRXOF (1 << 0)
#define SYSFLG2_RESVAL (1 << 1)
@@ -181,9 +191,12 @@
#define UBRLCR_WRDLEN8 (3 << 17)
#define UBRLCR_WRDLEN_MASK (3 << 17)
+#define SYNCIO_FRMLEN(x) (((x) & 0x3f) << 7)
+#define SYNCIO_CFGLEN(x) ((x) & 0x7f)
#define SYNCIO_SMCKEN (1 << 13)
#define SYNCIO_TXFRMEN (1 << 14)
+#define DAIR_RESERVED (0x0404)
#define DAIR_DAIEN (1 << 16)
#define DAIR_ECS (1 << 17)
#define DAIR_LCTM (1 << 19)
@@ -210,11 +223,23 @@
#define DAISR_LCNE (1 << 11)
#define DAISR_FIFO (1 << 12)
+#define DAI64FS_I2SF64 (1 << 0)
+#define DAI64FS_AUDIOCLKEN (1 << 1)
+#define DAI64FS_AUDIOCLKSRC (1 << 2)
+#define DAI64FS_MCLK256EN (1 << 3)
+#define DAI64FS_LOOPBACK (1 << 5)
+
#define SYSCON3_ADCCON (1 << 0)
+#define SYSCON3_CLKCTL0 (1 << 1)
+#define SYSCON3_CLKCTL1 (1 << 2)
#define SYSCON3_DAISEL (1 << 3)
#define SYSCON3_ADCCKNSEN (1 << 4)
+#define SYSCON3_VERSN(x) (((x) >> 5) & 7)
+#define SYSCON3_VERSN_MASK (7 << 5)
#define SYSCON3_FASTWAKE (1 << 8)
#define SYSCON3_DAIEN (1 << 9)
+#define SYSCON3_128FS SYSCON3_DAIEN
+#define SYSCON3_ENPD67 (1 << 10)
#define SDCONF_ACTIVE (1 << 10)
#define SDCONF_CLKCTL (1 << 9)
@@ -229,4 +254,25 @@
#define SDCONF_CASLAT_2 (2)
#define SDCONF_CASLAT_3 (3)
+#define MEMCFG_BUS_WIDTH_32 (1)
+#define MEMCFG_BUS_WIDTH_16 (0)
+#define MEMCFG_BUS_WIDTH_8 (3)
+
+#define MEMCFG_WAITSTATE_8_3 (0 << 2)
+#define MEMCFG_WAITSTATE_7_3 (1 << 2)
+#define MEMCFG_WAITSTATE_6_3 (2 << 2)
+#define MEMCFG_WAITSTATE_5_3 (3 << 2)
+#define MEMCFG_WAITSTATE_4_2 (4 << 2)
+#define MEMCFG_WAITSTATE_3_2 (5 << 2)
+#define MEMCFG_WAITSTATE_2_2 (6 << 2)
+#define MEMCFG_WAITSTATE_1_2 (7 << 2)
+#define MEMCFG_WAITSTATE_8_1 (8 << 2)
+#define MEMCFG_WAITSTATE_7_1 (9 << 2)
+#define MEMCFG_WAITSTATE_6_1 (10 << 2)
+#define MEMCFG_WAITSTATE_5_1 (11 << 2)
+#define MEMCFG_WAITSTATE_4_0 (12 << 2)
+#define MEMCFG_WAITSTATE_3_0 (13 << 2)
+#define MEMCFG_WAITSTATE_2_0 (14 << 2)
+#define MEMCFG_WAITSTATE_1_0 (15 << 2)
+
#endif /* __MACH_CLPS711X_H */
--
1.7.3.4
next prev parent reply other threads:[~2012-05-14 17:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-14 17:46 [PATCH 1/4] ARM: clps711x: Used own subarch directory for store header file Alexander Shiyan
2012-05-14 17:46 ` Alexander Shiyan [this message]
2012-05-14 17:46 ` [PATCH 3/4] ARM: clps711x: Added note about support EP731x CPU to Kconfig Alexander Shiyan
2012-05-14 17:46 ` [PATCH 4/4] ARM clps711x: Removed unused header mach/time.h Alexander Shiyan
2012-05-14 18:46 ` [PATCH 1/4] ARM: clps711x: Used own subarch directory for store header file Arnd Bergmann
[not found] ` <E1SU1SU-0003hN-FS.shc_work-mail-ru@f197.mail.ru>
2012-05-14 20:13 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337017571-16208-2-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).