From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: No subject
Date: Fri, 18 May 2012 14:27:10 +0200 [thread overview]
Message-ID: <1337344032-25431-1-git-send-email-s.hauer@pengutronix.de> (raw)
Hi All,
The following adds a drm/kms driver for the Freescale i.MX LCDC
controller. Most notable change to the last SDRM based version is that
the SDRM layer has been removed and the driver now is purely i.MX
specific. I hope that this is more acceptable now.
Another change is that the probe is now devicetree based. For now I
took the easy way out and only put an edid blob into the devicetree.
I haven't documented the binding yet, I would add that when the rest
is considered ok.
Comments very welcome.
Thanks
Sascha
----------------------------------------------------------------
Sascha Hauer (2):
DRM: add Freescale i.MX LCDC driver
pcm038 lcdc support
arch/arm/boot/dts/imx27-phytec-phycore.dts | 39 ++
arch/arm/boot/dts/imx27.dtsi | 7 +
arch/arm/mach-imx/clock-imx27.c | 1 +
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/imx/Kconfig | 18 +
drivers/gpu/drm/imx/Makefile | 8 +
drivers/gpu/drm/imx/imx-drm-core.c | 745 ++++++++++++++++++++++++++++
drivers/gpu/drm/imx/imx-fb.c | 179 +++++++
drivers/gpu/drm/imx/imx-fbdev.c | 275 ++++++++++
drivers/gpu/drm/imx/imx-gem.c | 343 +++++++++++++
drivers/gpu/drm/imx/imx-lcdc-crtc.c | 517 +++++++++++++++++++
drivers/gpu/drm/imx/imx-parallel-display.c | 228 +++++++++
13 files changed, 2363 insertions(+)
create mode 100644 drivers/gpu/drm/imx/Kconfig
create mode 100644 drivers/gpu/drm/imx/Makefile
create mode 100644 drivers/gpu/drm/imx/imx-drm-core.c
create mode 100644 drivers/gpu/drm/imx/imx-fb.c
create mode 100644 drivers/gpu/drm/imx/imx-fbdev.c
create mode 100644 drivers/gpu/drm/imx/imx-gem.c
create mode 100644 drivers/gpu/drm/imx/imx-lcdc-crtc.c
create mode 100644 drivers/gpu/drm/imx/imx-parallel-display.c
next reply other threads:[~2012-05-18 12:27 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-18 12:27 Sascha Hauer [this message]
2012-05-18 12:27 ` [PATCH 1/2] DRM: add Freescale i.MX LCDC driver Sascha Hauer
2012-05-22 21:28 ` Rob Clark
2012-05-23 7:47 ` Sascha Hauer
2012-05-23 8:37 ` Lars-Peter Clausen
2012-05-23 9:09 ` Daniel Vetter
2012-05-18 12:27 ` [PATCH 2/2] pcm038 lcdc support Sascha Hauer
2012-05-18 14:03 ` Adam Jackson
2012-05-18 15:13 ` Sascha Hauer
2012-05-22 10:02 ` Dave Airlie
2012-05-22 14:06 ` Lars-Peter Clausen
2012-05-23 8:12 ` Sascha Hauer
2012-05-24 6:31 ` Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2018-07-06 21:16 No subject Santosh Shilimkar
2018-07-06 21:16 ` Santosh Shilimkar
2018-07-06 21:16 ` Santosh Shilimkar
2018-07-06 21:18 ` Santosh Shilimkar
2018-06-23 21:08 David Lechner
2018-05-04 20:06 Bjorn Helgaas
2018-04-20 8:02 Christoph Hellwig
2018-04-16 1:22 Andrew Worsley
2017-11-30 10:25 Mary Cuevas
2017-08-22 1:38 Nicholas Piggin
2017-06-26 13:16 [PATCH] arm64: use readq() instead of readl() to read 64bit entry_point Luc Van Oostenryck
2017-07-03 23:46 ` No subject Khuong Dinh
2017-06-04 11:59 Yury Norov
[not found] <CAMj-D2DO_CfvD77izsGfggoKP45HSC9aD6auUPAYC9Yeq_aX7w@mail.gmail.com>
2017-05-04 16:44 ` gengdongjiu
2017-01-31 7:58 Andy Gross
2016-12-01 10:00 Ramana Radhakrishnan
2016-11-11 3:38 Chunyan Zhang
2016-09-30 14:37 Maxime Ripard
2016-07-10 9:24 Neil Armstrong
2016-04-22 8:25 Daniel Lezcano
2016-04-22 8:27 ` Daniel Lezcano
2016-04-11 7:51 Paul Walmsley
2015-12-13 21:57 何旦洁
2015-10-27 0:44 xuyiping
[not found] <E1ZqY3A-0004Mt-KH@feisty.vs19.net>
2015-10-26 3:21 ` Jiada Wang
2015-09-01 14:14 Mika Penttilä
2015-09-01 15:22 ` Fabio Estevam
2015-07-22 14:05 Chunfeng Yun
2015-07-15 9:32 Yuan Yao
2015-05-18 20:00 raghu MG
2015-04-21 10:18 Ard Biesheuvel
2015-02-26 16:56 Jorge Ramirez-Ortiz
2015-02-18 16:14 Lee Jones
2014-10-28 14:13 Mark Rutland
2014-09-22 19:41 Santosh Shilimkar
2014-09-22 7:45 Jingchang Lu
2014-07-09 17:49 Sebastian Andrzej Siewior
2014-05-24 1:21 Loc Ho
2014-05-12 16:40 Santosh Shilimkar
2014-05-12 16:38 Santosh Shilimkar
2014-02-22 15:53 Hans de Goede
2014-01-21 4:09 John Tobias
2014-01-16 16:11 Loc Ho
2014-01-16 16:09 Loc Ho
2014-01-13 10:32 Lothar Waßmann
2014-01-13 10:29 Lothar Waßmann
2013-12-12 7:30 Loc Ho
2013-11-01 7:04 Xiubo Li
2013-09-24 3:13 Rohit Vaswani
2013-09-02 17:01 Drasko DRASKOVIC
2013-08-24 9:29 Haojian Zhuang
2013-07-26 10:05 Haojian Zhuang
2013-06-28 5:49 Wang, Yalin
2013-06-19 10:57 Ben Dooks
2013-04-24 18:07 Viral Mehta
2012-12-29 9:17 steve.zhan
2012-11-11 14:16 Sammy Chan
2012-11-08 8:07 Abhimanyu Kapur
2012-10-14 10:05 Alexey Dobriyan
2012-08-27 6:40 Simon Horman
2012-06-21 18:26 Paul Walmsley
2012-06-06 10:33 Sascha Hauer
2012-03-20 18:28 John Szakmeister
2011-12-28 14:01 Shawn Guo
2011-12-02 16:01 Will Deacon
2011-11-28 2:35 Jett.Zhou
2011-09-19 1:45 Saleem Abdulrasool
2011-09-15 2:03 Jongpill Lee
2011-07-21 11:12 Padmavathi Venna
2011-06-27 20:47 John Ogness
2011-06-27 20:47 Jongpill Lee
2011-06-13 17:29 Andre Silva
2011-06-05 18:33 Hector Oron
2011-05-17 9:28 Javier Martin
2011-05-13 19:35 Vadim Bendebury
2011-03-01 14:02 Javier Martin
2011-01-13 9:13 Uwe Kleine-König
2010-12-03 1:08 tarek attia
2010-10-08 6:02 Daein Moon
2010-09-09 3:33 tarek attia
2010-06-24 13:48 Uwe Kleine-König
2010-06-07 17:58 Dave Hylands
2010-05-18 10:38 Marek Szyprowski
2010-04-17 21:43 nelakurthi koteswararao
2010-02-25 9:36 Thomas Weber
2009-09-17 9:37 Marc Kleine-Budde
2009-09-07 14:07 Somshekar ChandrashekarKadam
2009-08-25 10:34 Syed Rafiuddin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337344032-25431-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).