From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 18/19] ARM: OMAP4460: wakeupgen: set GIC_CPU0 backup status flag always
Date: Mon, 21 May 2012 12:12:34 +0300 [thread overview]
Message-ID: <1337591554.28274.6.camel@sokoban> (raw)
In-Reply-To: <87sjez1wa2.fsf@ti.com>
On Wed, 2012-05-16 at 17:33 -0700, Kevin Hilman wrote:
> Tero Kristo <t-kristo@ti.com> writes:
>
> > Without this, CPU0 will crash in the ROM code during wakeup from
> > device off. This patch also clears the GIC save area, to prevent
> > ROM code from writing garbage to the GIC registers during wakeup.
> > The actual GIC restore is done by kernel.
> >
> > This bug fix applies only to OMAP4460, it is fixed on OMAP4470.
> >
> > Signed-off-by: Tero Kristo <t-kristo@ti.com>
>
> Please create/use PM_ERRATUM flag.
Okay.
-Tero
>
> Kevin
>
> > ---
> > arch/arm/mach-omap2/omap-wakeupgen.c | 14 ++++++++++++++
> > arch/arm/mach-omap2/omap4-sar-layout.h | 1 +
> > 2 files changed, 15 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
> > index c7c4db4..30da299 100644
> > --- a/arch/arm/mach-omap2/omap-wakeupgen.c
> > +++ b/arch/arm/mach-omap2/omap-wakeupgen.c
> > @@ -447,10 +447,24 @@ int __init omap_wakeupgen_init(void)
> >
> > if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
> > sar_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
> > + /* Clean GIC SAR area */
> > + for (i = SAR_BACKUP_STATUS_OFFSET; i < WAKEUPGENENB_OFFSET_CPU0;
> > + i += 4)
> > + sar_writel(0, i, 0);
> > +
> > sar_writel(GIC_ISR_NON_SECURE, ICDISR_CPU0_OFFSET, 0);
> > sar_writel(GIC_ISR_NON_SECURE, ICDISR_CPU1_OFFSET, 0);
> > for (i = 0; i < max_spi_reg; i++)
> > sar_writel(GIC_ISR_NON_SECURE, ICDISR_SPI_OFFSET, i);
> > +
> > + /*
> > + * Set CPU0 GIC backup flag permanently for omap4460,
> > + * this is needed because of the ROM code bug that breaks
> > + * GIC during wakeup from device off
> > + */
> > + if (cpu_is_omap446x())
> > + __raw_writel(SAR_BACKUP_STATUS_GIC_CPU0,
> > + sar_base + SAR_BACKUP_STATUS_OFFSET);
> > iounmap(sar_base);
> > sar_base = NULL;
> > } else {
> > diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
> > index 0056667..e621c51 100644
> > --- a/arch/arm/mach-omap2/omap4-sar-layout.h
> > +++ b/arch/arm/mach-omap2/omap4-sar-layout.h
> > @@ -88,6 +88,7 @@
> > #define ICDISR_CPU0_OFFSET (SAR_BANK3_OFFSET + 0x50c)
> > #define ICDISR_CPU1_OFFSET (SAR_BANK3_OFFSET + 0x510)
> > #define ICDISR_SPI_OFFSET (SAR_BANK3_OFFSET + 0x514)
> > +#define SAR_BACKUP_STATUS_GIC_CPU0 0x1
> >
> > /* WakeUpGen save restore offset from OMAP44XX_SAR_RAM_BASE */
> > #define WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x684)
next prev parent reply other threads:[~2012-05-21 9:12 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-14 10:18 [PATCHv2 00/19] ARM: OMAP4: device off support Tero Kristo
2012-05-14 10:18 ` [PATCHv2 01/19] ARM: OMAP4: PM: powerdomain: Add HWSAR flag to L3INIT Tero Kristo
2012-05-16 18:27 ` Kevin Hilman
2012-05-14 10:18 ` [PATCHv2 02/19] ARM: OMAP4: Add SAR ROM base address Tero Kristo
2012-05-16 18:28 ` Kevin Hilman
2012-05-21 8:28 ` Tero Kristo
2012-05-14 10:18 ` [PATCHv2 03/19] ARM: OMAP4: PM: Add device-off support Tero Kristo
2012-05-16 22:36 ` Kevin Hilman
2012-05-17 7:10 ` Shilimkar, Santosh
2012-05-21 8:48 ` Tero Kristo
2012-05-21 14:05 ` Jean Pihet
2012-05-29 18:34 ` Kevin Hilman
2012-05-29 18:31 ` Kevin Hilman
2012-05-30 8:20 ` Tero Kristo
2012-05-14 10:18 ` [PATCHv2 04/19] ARM: OMAP4: PM: save/restore all DPLL settings in OFF mode Tero Kristo
2012-05-16 22:42 ` Kevin Hilman
2012-05-17 7:04 ` Shilimkar, Santosh
2012-05-17 8:52 ` Shilimkar, Santosh
2012-05-17 16:37 ` Kevin Hilman
2012-05-21 9:01 ` Tero Kristo
2012-05-29 19:46 ` Menon, Nishanth
2012-05-30 17:59 ` Kevin Hilman
2012-05-30 18:24 ` Menon, Nishanth
2012-05-30 22:09 ` Kevin Hilman
2012-05-31 2:38 ` Shilimkar, Santosh
2012-05-21 8:58 ` Tero Kristo
2012-05-14 10:18 ` [PATCHv2 05/19] ARM: OMAP4: PM: save/restore all CM1/2 " Tero Kristo
2012-05-16 22:48 ` Kevin Hilman
2012-05-17 7:05 ` Shilimkar, Santosh
2012-05-14 10:18 ` [PATCHv2 06/19] ARM: OMAP4: PM: Add SAR backup support towards device OFF Tero Kristo
2012-05-16 22:58 ` Kevin Hilman
2012-05-17 7:02 ` Shilimkar, Santosh
2012-05-17 16:42 ` Kevin Hilman
2012-05-18 5:53 ` Shilimkar, Santosh
2012-05-21 9:07 ` Tero Kristo
2012-05-14 10:18 ` [PATCHv2 07/19] ARM: OMAP4: Auto generate SAR layout contents Tero Kristo
2012-05-14 10:18 ` [PATCHv2 08/19] ARM: OMAP4: SAR: generate overwrite data based on SAR ROM contents Tero Kristo
2012-05-14 10:18 ` [PATCHv2 09/19] ARM: OMAP4: PM: add errata support Tero Kristo
2012-05-29 20:10 ` Menon, Nishanth
2012-05-30 8:32 ` Tero Kristo
2012-05-30 14:45 ` Menon, Nishanth
2012-05-14 10:18 ` [PATCHv2 10/19] ARM: OMAP4: PM: Work-around for ROM code BUG of IVAHD/TESLA Tero Kristo
2012-05-16 23:05 ` Kevin Hilman
2012-05-16 23:07 ` Kevin Hilman
2012-05-21 9:11 ` Tero Kristo
2012-05-29 20:13 ` Kevin Hilman
2012-05-17 6:52 ` Shilimkar, Santosh
2012-05-17 16:45 ` Kevin Hilman
2012-05-18 5:55 ` Shilimkar, Santosh
2012-05-14 10:18 ` [PATCHv2 11/19] ARM: OMAP4: PM: save/restore CM L3INSTR registers when MPU hits OSWR/OFF mode Tero Kristo
2012-05-16 23:17 ` Kevin Hilman
2012-05-17 6:53 ` Shilimkar, Santosh
2012-05-14 10:18 ` [PATCHv2 12/19] ARM: OMAP4: PM: update ROM return address for OSWR and OFF Tero Kristo
2012-05-16 23:36 ` Kevin Hilman
2012-05-21 9:29 ` Tero Kristo
2012-05-14 10:18 ` [PATCHv2 13/19] ARM: OMAP4: PM: Mark the PPI and SPI interrupts as non-secure for GP Tero Kristo
2012-05-16 23:48 ` Kevin Hilman
2012-05-21 9:32 ` Tero Kristo
2012-05-14 10:18 ` [PATCHv2 14/19] ARM: OMAP4: wakeupgen: enable clocks for save_secure_all Tero Kristo
2012-05-17 0:06 ` Kevin Hilman
2012-05-21 9:38 ` Tero Kristo
2012-05-21 9:43 ` Shilimkar, Santosh
2012-05-29 20:15 ` Kevin Hilman
2012-05-29 20:48 ` Menon, Nishanth
2012-05-30 8:44 ` Tero Kristo
2012-05-30 8:33 ` Tero Kristo
2012-05-17 0:17 ` Paul Walmsley
2012-05-21 9:35 ` Tero Kristo
2012-05-21 9:39 ` Shilimkar, Santosh
2012-05-14 10:18 ` [PATCHv2 15/19] ARM: OMAP4430: PM: workaround for DDR corruption on second CS Tero Kristo
2012-05-17 0:15 ` Kevin Hilman
2012-05-17 7:12 ` Shilimkar, Santosh
2012-05-17 16:47 ` Kevin Hilman
2012-05-18 5:55 ` Shilimkar, Santosh
2012-05-14 10:18 ` [PATCHv2 16/19] TEMP: ARM: OMAP4: prevent voltage transitions Tero Kristo
2012-05-14 10:18 ` [PATCHv2 17/19] ARM: OMAP4: put cpu1 back to sleep if no wake request Tero Kristo
2012-05-17 0:31 ` Kevin Hilman
2012-05-21 10:21 ` Tero Kristo
2012-05-21 10:40 ` Shilimkar, Santosh
2012-05-29 20:17 ` Kevin Hilman
2012-05-30 15:18 ` Menon, Nishanth
2012-05-14 10:18 ` [PATCHv2 18/19] ARM: OMAP4460: wakeupgen: set GIC_CPU0 backup status flag always Tero Kristo
2012-05-17 0:33 ` Kevin Hilman
2012-05-21 9:12 ` Tero Kristo [this message]
2012-05-14 10:18 ` [PATCHv2 19/19] ARM: OMAP4: powerdomain: update mpu / core off counters during device off Tero Kristo
2012-05-30 21:08 ` Menon, Nishanth
2012-05-31 6:50 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337591554.28274.6.camel@sokoban \
--to=t-kristo@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).