From: richard.zhao@freescale.com (Richard Zhao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices
Date: Mon, 21 May 2012 17:23:57 +0800 [thread overview]
Message-ID: <1337592237-5090-13-git-send-email-richard.zhao@freescale.com> (raw)
In-Reply-To: <1337592237-5090-1-git-send-email-richard.zhao@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
arch/arm/boot/dts/imx28-evk.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/imx28.dtsi | 12 ++++++++++--
2 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index ee520a5..ca6fe30 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -73,10 +73,28 @@
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
+
+ usbphy0: usbphy at 8007c000 {
+ status = "okay";
+ };
+
+ usbphy1: usbphy at 8007e000 {
+ status = "okay";
+ };
};
};
ahb at 80080000 {
+ usb0: usb at 80080000 {
+ fsl,vbus-power = <&gpio3 9 0>;
+ status = "okay";
+ };
+
+ usb1: usb at 80090000 {
+ fsl,vbus-power = <&gpio3 8 0>;
+ status = "okay";
+ };
+
mac0: ethernet at 800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4634cb8..502ad05 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -441,11 +441,13 @@
};
usbphy0: usbphy at 8007c000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007c000 0x2000>;
status = "disabled";
};
usbphy1: usbphy at 8007e000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007e000 0x2000>;
status = "disabled";
};
@@ -459,13 +461,19 @@
reg = <0x80080000 0x80000>;
ranges;
- usbctrl0: usbctrl at 80080000 {
+ usb0: usb at 80080000 {
+ compatible = "fsl,imx28-usb", "fsl,imx31-usb";
reg = <0x80080000 0x10000>;
+ interrupts = <93>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
- usbctrl1: usbctrl at 80090000 {
+ usb1: usb at 80090000 {
+ compatible = "fsl,imx28-usb", "fsl,imx31-usb";
reg = <0x80090000 0x10000>;
+ interrupts = <92>;
+ fsl,usbphy = <&usbphy1>;
status = "disabled";
};
--
1.7.5.4
next prev parent reply other threads:[~2012-05-21 9:23 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-21 9:23 [PATCH v2 00/12] add imx usb driver for mx28/6x Richard Zhao
2012-05-21 9:23 ` [PATCH v2 01/12] usb: otg: add notify_connect_change callback Richard Zhao
2012-05-21 9:26 ` Felipe Balbi
2012-05-21 9:36 ` Richard Zhao
2012-05-21 9:38 ` Felipe Balbi
2012-05-21 10:19 ` Richard Zhao
2012-05-21 13:03 ` Greg KH
2012-05-21 13:05 ` Greg KH
2012-05-21 17:36 ` Marek Vasut
2012-05-21 17:47 ` Greg KH
2012-05-21 18:32 ` Marek Vasut
2012-05-21 18:40 ` Greg KH
2012-05-21 19:27 ` Marek Vasut
2012-05-22 0:27 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer Richard Zhao
2012-05-22 4:22 ` Marek Vasut
2012-05-22 9:59 ` Alexander Shishkin
2012-05-22 14:07 ` Marek Vasut
2012-05-22 15:14 ` Richard Zhao
2012-05-23 1:35 ` Chen Peter-B29397
2012-05-23 8:08 ` Alexander Shishkin
2012-05-21 9:23 ` [PATCH v2 03/12] usb: ehci-hcd: notify phy when connect change Richard Zhao
2012-05-22 4:23 ` Marek Vasut
2012-05-22 4:36 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 04/12] usb: otg: add basic mxs phy driver support Richard Zhao
2012-05-21 9:23 ` [PATCH v2 05/12] usb: chipidea: add imx driver binding Richard Zhao
2012-05-22 4:30 ` Marek Vasut
2012-05-22 4:51 ` Richard Zhao
2012-05-22 9:56 ` Alexander Shishkin
2012-05-22 10:06 ` Felipe Balbi
2012-05-22 10:31 ` Richard Zhao
2012-05-22 10:35 ` Felipe Balbi
2012-05-22 10:41 ` Alexander Shishkin
2012-05-22 15:06 ` Richard Zhao
2012-05-23 13:02 ` Alexander Shishkin
2012-05-23 13:09 ` Felipe Balbi
2012-05-23 13:13 ` Alexander Shishkin
2012-05-22 13:52 ` Shawn Guo
2012-05-22 13:55 ` Felipe Balbi
2012-05-22 10:21 ` Alexander Shishkin
2012-05-22 10:24 ` Alexander Shishkin
2012-05-22 15:30 ` Richard Zhao
2012-05-22 15:28 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export Richard Zhao
2012-05-22 4:31 ` Marek Vasut
2012-05-22 4:56 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios Richard Zhao
2012-05-22 3:17 ` Shawn Guo
2012-05-22 3:25 ` Marek Vasut
2012-05-22 3:32 ` Shawn Guo
2012-05-22 4:20 ` Marek Vasut
2012-05-22 4:42 ` Shawn Guo
2012-05-22 5:22 ` Marek Vasut
2012-05-22 5:25 ` Shawn Guo
2012-05-22 5:27 ` Marek Vasut
2012-05-22 6:07 ` Richard Zhao
2012-05-22 3:38 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 08/12] ARM: imx6q: add usbphy clocks Richard Zhao
2012-05-22 4:32 ` Marek Vasut
2012-05-22 4:45 ` Shawn Guo
2012-05-22 5:22 ` Marek Vasut
2012-05-22 4:59 ` Richard Zhao
2012-05-22 5:37 ` Shawn Guo
2012-05-22 6:08 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 09/12] ARM: imx6q: disable usb charger detector Richard Zhao
2012-05-22 3:48 ` Shawn Guo
2012-05-22 4:32 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices Richard Zhao
2012-05-22 5:10 ` Shawn Guo
2012-05-22 5:59 ` Richard Zhao
2012-05-22 6:08 ` Shawn Guo
2012-05-22 6:19 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks Richard Zhao
2012-05-22 4:48 ` Shawn Guo
2012-05-22 5:01 ` Richard Zhao
2012-05-21 9:23 ` Richard Zhao [this message]
2012-05-22 4:52 ` [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices Shawn Guo
2012-05-22 5:03 ` Richard Zhao
2012-05-22 5:24 ` Marek Vasut
2012-05-21 19:34 ` [PATCH v2 00/12] add imx usb driver for mx28/6x Fabio Estevam
2012-05-21 19:41 ` Marek Vasut
2012-05-21 19:47 ` Subodh Nijsure
2012-05-21 20:07 ` Marek Vasut
2012-05-22 1:38 ` Chen Peter-B29397
2012-05-22 1:41 ` Richard Zhao
2012-05-22 1:44 ` Chen Peter-B29397
2012-05-22 1:51 ` Richard Zhao
2012-05-22 2:00 ` Shawn Guo
2012-05-22 5:08 ` Richard Zhao
2012-05-22 13:13 ` Dirk Behme
2012-05-24 3:38 ` Richard Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337592237-5090-13-git-send-email-richard.zhao@freescale.com \
--to=richard.zhao@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).