linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: richard.zhao@freescale.com (Richard Zhao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer
Date: Mon, 21 May 2012 17:23:47 +0800	[thread overview]
Message-ID: <1337592237-5090-3-git-send-email-richard.zhao@freescale.com> (raw)
In-Reply-To: <1337592237-5090-1-git-send-email-richard.zhao@freescale.com>

Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 drivers/usb/chipidea/ci.h    |    2 ++
 drivers/usb/chipidea/core.c  |    4 ++++
 drivers/usb/chipidea/host.c  |    1 +
 drivers/usb/chipidea/udc.c   |   11 +++++++----
 include/linux/usb/chipidea.h |    3 +++
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 50911f8..71d7080 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -160,6 +160,8 @@ struct ci13xxx {
 
 	struct ci13xxx_udc_driver	*udc_driver;
 	int				vbus_active;
+	/* FIXME: some day, we'll not use global phy */
+	bool				global_phy;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 15e03b3..0492786 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -365,6 +365,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 
 	ci->dev = dev;
 	ci->udc_driver = dev->platform_data;
+	if (ci->udc_driver->phy)
+		ci->transceiver = ci->udc_driver->phy;
+	else
+		ci->global_phy = 1;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 9eacd21..7bc11a5 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -121,6 +121,7 @@ static int host_start(struct ci13xxx *ci)
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
 	ehci->has_hostpc = ci->hw_bank.lpm;
+	ehci->transceiver = ci->transceiver;
 
 	ret = usb_add_hcd(hcd, 0, 0);
 	if (ret)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 51f9694..22139fae 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1687,7 +1687,8 @@ static int udc_start(struct ci13xxx *udc)
 
 	udc->gadget.ep0 = &udc->ep0in->ep;
 
-	udc->transceiver = usb_get_transceiver();
+	if (udc->global_phy) {
+		udc->transceiver = usb_get_transceiver();
 
 	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (udc->transceiver == NULL) {
@@ -1731,7 +1732,8 @@ static int udc_start(struct ci13xxx *udc)
 remove_trans:
 	if (udc->transceiver) {
 		otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
-		usb_put_transceiver(udc->transceiver);
+		if (udc->global_phy)
+			usb_put_transceiver(udc->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
@@ -1740,7 +1742,7 @@ remove_dbg:
 unreg_device:
 	device_unregister(&udc->gadget.dev);
 put_transceiver:
-	if (udc->transceiver)
+	if (udc->transceiver && udc->global_phy)
 		usb_put_transceiver(udc->transceiver);
 free_pools:
 	dma_pool_destroy(udc->td_pool);
@@ -1774,7 +1776,8 @@ static void udc_stop(struct ci13xxx *udc)
 
 	if (udc->transceiver) {
 		otg_set_peripheral(udc->transceiver->otg, NULL);
-		usb_put_transceiver(udc->transceiver);
+		if (udc->global_phy)
+			usb_put_transceiver(udc->transceiver);
 	}
 	dbg_remove_files(&udc->gadget.dev);
 	device_unregister(&udc->gadget.dev);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index edb90d6..c46c9e9 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
 #ifndef __LINUX_USB_CHIPIDEA_H
 #define __LINUX_USB_CHIPIDEA_H
 
+#include <linux/usb/otg.h>
+
 struct ci13xxx;
 struct ci13xxx_udc_driver {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
+	struct usb_phy	*phy;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.5.4

  parent reply	other threads:[~2012-05-21  9:23 UTC|newest]

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-21  9:23 [PATCH v2 00/12] add imx usb driver for mx28/6x Richard Zhao
2012-05-21  9:23 ` [PATCH v2 01/12] usb: otg: add notify_connect_change callback Richard Zhao
2012-05-21  9:26   ` Felipe Balbi
2012-05-21  9:36     ` Richard Zhao
2012-05-21  9:38       ` Felipe Balbi
2012-05-21 10:19         ` Richard Zhao
2012-05-21 13:03         ` Greg KH
2012-05-21 13:05   ` Greg KH
2012-05-21 17:36     ` Marek Vasut
2012-05-21 17:47       ` Greg KH
2012-05-21 18:32         ` Marek Vasut
2012-05-21 18:40           ` Greg KH
2012-05-21 19:27             ` Marek Vasut
2012-05-22  0:27               ` Richard Zhao
2012-05-21  9:23 ` Richard Zhao [this message]
2012-05-22  4:22   ` [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer Marek Vasut
2012-05-22  9:59   ` Alexander Shishkin
2012-05-22 14:07     ` Marek Vasut
2012-05-22 15:14       ` Richard Zhao
2012-05-23  1:35         ` Chen Peter-B29397
2012-05-23  8:08       ` Alexander Shishkin
2012-05-21  9:23 ` [PATCH v2 03/12] usb: ehci-hcd: notify phy when connect change Richard Zhao
2012-05-22  4:23   ` Marek Vasut
2012-05-22  4:36     ` Richard Zhao
2012-05-21  9:23 ` [PATCH v2 04/12] usb: otg: add basic mxs phy driver support Richard Zhao
2012-05-21  9:23 ` [PATCH v2 05/12] usb: chipidea: add imx driver binding Richard Zhao
2012-05-22  4:30   ` Marek Vasut
2012-05-22  4:51     ` Richard Zhao
2012-05-22  9:56       ` Alexander Shishkin
2012-05-22 10:06         ` Felipe Balbi
2012-05-22 10:31           ` Richard Zhao
2012-05-22 10:35             ` Felipe Balbi
2012-05-22 10:41               ` Alexander Shishkin
2012-05-22 15:06                 ` Richard Zhao
2012-05-23 13:02                   ` Alexander Shishkin
2012-05-23 13:09                     ` Felipe Balbi
2012-05-23 13:13                       ` Alexander Shishkin
2012-05-22 13:52               ` Shawn Guo
2012-05-22 13:55                 ` Felipe Balbi
2012-05-22 10:21   ` Alexander Shishkin
2012-05-22 10:24     ` Alexander Shishkin
2012-05-22 15:30       ` Richard Zhao
2012-05-22 15:28     ` Richard Zhao
2012-05-21  9:23 ` [PATCH v2 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export Richard Zhao
2012-05-22  4:31   ` Marek Vasut
2012-05-22  4:56     ` Richard Zhao
2012-05-21  9:23 ` [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios Richard Zhao
2012-05-22  3:17   ` Shawn Guo
2012-05-22  3:25     ` Marek Vasut
2012-05-22  3:32       ` Shawn Guo
2012-05-22  4:20         ` Marek Vasut
2012-05-22  4:42           ` Shawn Guo
2012-05-22  5:22             ` Marek Vasut
2012-05-22  5:25               ` Shawn Guo
2012-05-22  5:27                 ` Marek Vasut
2012-05-22  6:07                   ` Richard Zhao
2012-05-22  3:38     ` Richard Zhao
2012-05-21  9:23 ` [PATCH v2 08/12] ARM: imx6q: add usbphy clocks Richard Zhao
2012-05-22  4:32   ` Marek Vasut
2012-05-22  4:45     ` Shawn Guo
2012-05-22  5:22       ` Marek Vasut
2012-05-22  4:59     ` Richard Zhao
2012-05-22  5:37   ` Shawn Guo
2012-05-22  6:08     ` Richard Zhao
2012-05-21  9:23 ` [PATCH v2 09/12] ARM: imx6q: disable usb charger detector Richard Zhao
2012-05-22  3:48   ` Shawn Guo
2012-05-22  4:32     ` Richard Zhao
2012-05-21  9:23 ` [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices Richard Zhao
2012-05-22  5:10   ` Shawn Guo
2012-05-22  5:59     ` Richard Zhao
2012-05-22  6:08       ` Shawn Guo
2012-05-22  6:19         ` Richard Zhao
2012-05-21  9:23 ` [PATCH v2 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks Richard Zhao
2012-05-22  4:48   ` Shawn Guo
2012-05-22  5:01     ` Richard Zhao
2012-05-21  9:23 ` [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices Richard Zhao
2012-05-22  4:52   ` Shawn Guo
2012-05-22  5:03     ` Richard Zhao
2012-05-22  5:24       ` Marek Vasut
2012-05-21 19:34 ` [PATCH v2 00/12] add imx usb driver for mx28/6x Fabio Estevam
2012-05-21 19:41   ` Marek Vasut
2012-05-21 19:47     ` Subodh Nijsure
2012-05-21 20:07       ` Marek Vasut
2012-05-22  1:38         ` Chen Peter-B29397
2012-05-22  1:41           ` Richard Zhao
2012-05-22  1:44             ` Chen Peter-B29397
2012-05-22  1:51               ` Richard Zhao
2012-05-22  2:00               ` Shawn Guo
2012-05-22  5:08   ` Richard Zhao
2012-05-22 13:13     ` Dirk Behme
2012-05-24  3:38     ` Richard Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1337592237-5090-3-git-send-email-richard.zhao@freescale.com \
    --to=richard.zhao@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).