From: richard.zhao@freescale.com (Richard Zhao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 08/12] ARM: imx6q: add usbphy clocks
Date: Mon, 21 May 2012 17:23:53 +0800 [thread overview]
Message-ID: <1337592237-5090-9-git-send-email-richard.zhao@freescale.com> (raw)
In-Reply-To: <1337592237-5090-1-git-send-email-richard.zhao@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
arch/arm/mach-imx/clk-imx6q.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index f99509a..0d003aa 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -152,7 +152,7 @@ enum mx6q_clks {
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, clk_max
+ ssi2_ipg, ssi3_ipg, usbphy1_gate, usbphy2_gate, clk_max
};
static struct clk *clk[clk_max];
@@ -197,6 +197,9 @@ int __init mx6q_clocks_init(void)
clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3);
clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3);
+ clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "pll3_usb_otg", base + 0x10, 6);
+ clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "pll7_usb_host", base + 0x20, 6);
+
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
@@ -395,6 +398,8 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
+ clk_register_clkdev(clk[usbphy1_gate], NULL, "20c9000.usbphy");
+ clk_register_clkdev(clk[usbphy2_gate], NULL, "20ca000.usbphy");
clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
--
1.7.5.4
next prev parent reply other threads:[~2012-05-21 9:23 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-21 9:23 [PATCH v2 00/12] add imx usb driver for mx28/6x Richard Zhao
2012-05-21 9:23 ` [PATCH v2 01/12] usb: otg: add notify_connect_change callback Richard Zhao
2012-05-21 9:26 ` Felipe Balbi
2012-05-21 9:36 ` Richard Zhao
2012-05-21 9:38 ` Felipe Balbi
2012-05-21 10:19 ` Richard Zhao
2012-05-21 13:03 ` Greg KH
2012-05-21 13:05 ` Greg KH
2012-05-21 17:36 ` Marek Vasut
2012-05-21 17:47 ` Greg KH
2012-05-21 18:32 ` Marek Vasut
2012-05-21 18:40 ` Greg KH
2012-05-21 19:27 ` Marek Vasut
2012-05-22 0:27 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer Richard Zhao
2012-05-22 4:22 ` Marek Vasut
2012-05-22 9:59 ` Alexander Shishkin
2012-05-22 14:07 ` Marek Vasut
2012-05-22 15:14 ` Richard Zhao
2012-05-23 1:35 ` Chen Peter-B29397
2012-05-23 8:08 ` Alexander Shishkin
2012-05-21 9:23 ` [PATCH v2 03/12] usb: ehci-hcd: notify phy when connect change Richard Zhao
2012-05-22 4:23 ` Marek Vasut
2012-05-22 4:36 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 04/12] usb: otg: add basic mxs phy driver support Richard Zhao
2012-05-21 9:23 ` [PATCH v2 05/12] usb: chipidea: add imx driver binding Richard Zhao
2012-05-22 4:30 ` Marek Vasut
2012-05-22 4:51 ` Richard Zhao
2012-05-22 9:56 ` Alexander Shishkin
2012-05-22 10:06 ` Felipe Balbi
2012-05-22 10:31 ` Richard Zhao
2012-05-22 10:35 ` Felipe Balbi
2012-05-22 10:41 ` Alexander Shishkin
2012-05-22 15:06 ` Richard Zhao
2012-05-23 13:02 ` Alexander Shishkin
2012-05-23 13:09 ` Felipe Balbi
2012-05-23 13:13 ` Alexander Shishkin
2012-05-22 13:52 ` Shawn Guo
2012-05-22 13:55 ` Felipe Balbi
2012-05-22 10:21 ` Alexander Shishkin
2012-05-22 10:24 ` Alexander Shishkin
2012-05-22 15:30 ` Richard Zhao
2012-05-22 15:28 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export Richard Zhao
2012-05-22 4:31 ` Marek Vasut
2012-05-22 4:56 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios Richard Zhao
2012-05-22 3:17 ` Shawn Guo
2012-05-22 3:25 ` Marek Vasut
2012-05-22 3:32 ` Shawn Guo
2012-05-22 4:20 ` Marek Vasut
2012-05-22 4:42 ` Shawn Guo
2012-05-22 5:22 ` Marek Vasut
2012-05-22 5:25 ` Shawn Guo
2012-05-22 5:27 ` Marek Vasut
2012-05-22 6:07 ` Richard Zhao
2012-05-22 3:38 ` Richard Zhao
2012-05-21 9:23 ` Richard Zhao [this message]
2012-05-22 4:32 ` [PATCH v2 08/12] ARM: imx6q: add usbphy clocks Marek Vasut
2012-05-22 4:45 ` Shawn Guo
2012-05-22 5:22 ` Marek Vasut
2012-05-22 4:59 ` Richard Zhao
2012-05-22 5:37 ` Shawn Guo
2012-05-22 6:08 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 09/12] ARM: imx6q: disable usb charger detector Richard Zhao
2012-05-22 3:48 ` Shawn Guo
2012-05-22 4:32 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices Richard Zhao
2012-05-22 5:10 ` Shawn Guo
2012-05-22 5:59 ` Richard Zhao
2012-05-22 6:08 ` Shawn Guo
2012-05-22 6:19 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks Richard Zhao
2012-05-22 4:48 ` Shawn Guo
2012-05-22 5:01 ` Richard Zhao
2012-05-21 9:23 ` [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices Richard Zhao
2012-05-22 4:52 ` Shawn Guo
2012-05-22 5:03 ` Richard Zhao
2012-05-22 5:24 ` Marek Vasut
2012-05-21 19:34 ` [PATCH v2 00/12] add imx usb driver for mx28/6x Fabio Estevam
2012-05-21 19:41 ` Marek Vasut
2012-05-21 19:47 ` Subodh Nijsure
2012-05-21 20:07 ` Marek Vasut
2012-05-22 1:38 ` Chen Peter-B29397
2012-05-22 1:41 ` Richard Zhao
2012-05-22 1:44 ` Chen Peter-B29397
2012-05-22 1:51 ` Richard Zhao
2012-05-22 2:00 ` Shawn Guo
2012-05-22 5:08 ` Richard Zhao
2012-05-22 13:13 ` Dirk Behme
2012-05-24 3:38 ` Richard Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337592237-5090-9-git-send-email-richard.zhao@freescale.com \
--to=richard.zhao@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).