From: fabio.porcedda@gmail.com (Fabio Porcedda)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91: add support for Telit EVK GE863-PRO3 Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Thu, 31 May 2012 08:57:50 +0200 [thread overview]
Message-ID: <1338447470-3492-1-git-send-email-fabio.porcedda@gmail.com> (raw)
---
arch/arm/boot/dts/evk_ge863_pro3.dts | 57 ++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/Makefile.boot | 1 +
2 files changed, 58 insertions(+)
create mode 100644 arch/arm/boot/dts/evk_ge863_pro3.dts
diff --git a/arch/arm/boot/dts/evk_ge863_pro3.dts b/arch/arm/boot/dts/evk_ge863_pro3.dts
new file mode 100644
index 0000000..bcd5ae1
--- /dev/null
+++ b/arch/arm/boot/dts/evk_ge863_pro3.dts
@@ -0,0 +1,57 @@
+/*
+ * evk_ge863_pro3.dts - Device Tree file for Telit EVK GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ * 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+ model = "Telit EVK GE863-PRO3";
+ compatible = "telit,evk_ge863-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock at 0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <6000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial at fffff200 {
+ status = "okay";
+ };
+
+ usb1: gadget at fffa4000 {
+ atmel,vbus-gpio = <&pioC 4 0>;
+ status = "okay";
+ };
+ };
+
+
+ nand0: nand at 40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ root at 07c0000 {
+ label = "root";
+ reg = <0x7c0000 0x7840000>;
+ };
+
+ };
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 9e84fe4..7bb44f0 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -16,6 +16,7 @@ endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += evk_ge863_pro3.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263
--
1.7.10
reply other threads:[~2012-05-31 6:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338447470-3492-1-git-send-email-fabio.porcedda@gmail.com \
--to=fabio.porcedda@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).