From: stigge@antcom.de (Roland Stigge)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/14] ARM: LPC32xx: Adjust dtsi file for MLC controller configuration
Date: Mon, 11 Jun 2012 13:02:08 +0200 [thread overview]
Message-ID: <1339412537-24485-6-git-send-email-stigge@antcom.de> (raw)
In-Reply-To: <1339412537-24485-1-git-send-email-stigge@antcom.de>
This patch takes into account that the MTD NAND MLC controller needs more
registers, located actually before the previously allocated memory range,
already starting at 200a8000 instead of 200b0000.
Further, the interrupt for the controller is configured.
Signed-off-by: Roland Stigge <stigge@antcom.de>
---
arch/arm/boot/dts/lpc32xx.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- linux-2.6.orig/arch/arm/boot/dts/lpc32xx.dtsi
+++ linux-2.6/arch/arm/boot/dts/lpc32xx.dtsi
@@ -38,9 +38,10 @@
status = "disable";
};
- mlc: flash at 200B0000 {
+ mlc: flash at 200a8000 {
compatible = "nxp,lpc3220-mlc";
- reg = <0x200B0000 0x1000>;
+ reg = <0x200a8000 0x11000>;
+ interrupts = <11 0>;
status = "disable";
};
next prev parent reply other threads:[~2012-06-11 11:02 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-11 11:02 [PATCH 0/14] ARM: LPC32xx specific updates for next Roland Stigge
2012-06-11 11:02 ` [PATCH 1/14] ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts Roland Stigge
2012-06-11 22:19 ` Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 2/14] ARM: LPC32xx: Clock initialization for NAND controllers Roland Stigge
2012-06-11 11:02 ` [PATCH 3/14] ARM: LPC32xx: Remove SLC controller initialization from platform init Roland Stigge
2012-06-11 22:19 ` Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 4/14] ARM: LPC32xx: Add DMA configuration to platform data Roland Stigge
2012-06-11 11:10 ` Russell King - ARM Linux
2012-06-14 17:07 ` Roland Stigge
2012-06-11 11:02 ` Roland Stigge [this message]
2012-06-11 22:20 ` [PATCH 5/14] ARM: LPC32xx: Adjust dtsi file for MLC controller configuration Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 6/14] ARM: LPC32xx: Add dts for EA3250 reference board Roland Stigge
2012-06-11 22:20 ` Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 7/14] ARM: LPC32xx: DTS adjustment for key matrix controller Roland Stigge
2012-06-11 22:21 ` Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 8/14] ARM: LPC32xx: Clock " Roland Stigge
2012-06-11 14:16 ` Arnd Bergmann
2012-06-11 14:34 ` Roland Stigge
2012-06-11 14:58 ` Arnd Bergmann
2012-06-11 11:02 ` [PATCH 9/14] ARM: LPC32xx: Defconfig update Roland Stigge
2012-06-11 22:22 ` Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 10/14] ARM: LPC32xx: Add MMC controller support Roland Stigge
2012-06-11 22:23 ` Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 11/14] ARM: LPC32xx: DTS adjustment for using pl18x primecell Roland Stigge
2012-06-11 14:14 ` Arnd Bergmann
2012-06-11 14:28 ` Roland Stigge
2012-06-11 14:57 ` Arnd Bergmann
2012-06-11 11:02 ` [PATCH 12/14] ARM: LPC32xx: DT conversion of Standard UARTs Roland Stigge
2012-06-11 22:23 ` Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 13/14] ARM: LPC32xx: High Speed UART configuration via DT Roland Stigge
2012-06-11 22:25 ` Alexandre Pereira da Silva
2012-06-11 11:02 ` [PATCH 14/14] ARM: LPC32xx: Remove mach specific ARCH_NR_GPIOS, use default Roland Stigge
2012-06-11 22:24 ` Alexandre Pereira da Silva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339412537-24485-6-git-send-email-stigge@antcom.de \
--to=stigge@antcom.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).