From: stigge@antcom.de (Roland Stigge)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: tegra: Fix dts files w/ status property: "disable" -> "disabled"
Date: Mon, 11 Jun 2012 21:09:45 +0200 [thread overview]
Message-ID: <1339441785-14641-2-git-send-email-stigge@antcom.de> (raw)
In-Reply-To: <1339441785-14641-1-git-send-email-stigge@antcom.de>
This patches fixes some status = "disable" strings to "disabled", the correct
way of disabling nodes in the devicetree.
Just the tegra part here. Everything else goes via other patches and trees.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
---
Applies to v3.5-rc2
arch/arm/boot/dts/omap3-beagle.dts | 4 +--
arch/arm/boot/dts/omap4-panda.dts | 6 ++---
arch/arm/boot/dts/omap4-sdp.dts | 4 +--
arch/arm/boot/dts/tegra20.dtsi | 36 +++++++++++++++++------------------
arch/arm/boot/dts/tegra30.dtsi | 38 ++++++++++++++++++-------------------
5 files changed, 44 insertions(+), 44 deletions(-)
--- linux-2.6.orig/arch/arm/boot/dts/tegra20.dtsi
+++ linux-2.6/arch/arm/boot/dts/tegra20.dtsi
@@ -72,7 +72,7 @@
reg = <0x70002800 0x200>;
interrupts = <0 13 0x04>;
nvidia,dma-request-selector = <&apbdma 2>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s2: i2s at 70002a00 {
@@ -80,7 +80,7 @@
reg = <0x70002a00 0x200>;
interrupts = <0 3 0x04>;
nvidia,dma-request-selector = <&apbdma 1>;
- status = "disable";
+ status = "disabled";
};
serial at 70006000 {
@@ -88,7 +88,7 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
- status = "disable";
+ status = "disabled";
};
serial at 70006040 {
@@ -96,7 +96,7 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
- status = "disable";
+ status = "disabled";
};
serial at 70006200 {
@@ -104,7 +104,7 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
- status = "disable";
+ status = "disabled";
};
serial at 70006300 {
@@ -112,7 +112,7 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
- status = "disable";
+ status = "disabled";
};
serial at 70006400 {
@@ -120,7 +120,7 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000c000 {
@@ -129,7 +129,7 @@
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000c400 {
@@ -138,7 +138,7 @@
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000c500 {
@@ -147,7 +147,7 @@
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000d000 {
@@ -156,7 +156,7 @@
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
pmc {
@@ -190,7 +190,7 @@
interrupts = <0 20 0x04>;
phy_type = "utmi";
nvidia,has-legacy-mode;
- status = "disable";
+ status = "disabled";
};
usb at c5004000 {
@@ -198,7 +198,7 @@
reg = <0xc5004000 0x4000>;
interrupts = <0 21 0x04>;
phy_type = "ulpi";
- status = "disable";
+ status = "disabled";
};
usb at c5008000 {
@@ -206,35 +206,35 @@
reg = <0xc5008000 0x4000>;
interrupts = <0 97 0x04>;
phy_type = "utmi";
- status = "disable";
+ status = "disabled";
};
sdhci at c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
interrupts = <0 14 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci at c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = <0 15 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci at c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
interrupts = <0 19 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci at c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
interrupts = <0 31 0x04>;
- status = "disable";
+ status = "disabled";
};
pmu {
--- linux-2.6.orig/arch/arm/boot/dts/tegra30.dtsi
+++ linux-2.6/arch/arm/boot/dts/tegra30.dtsi
@@ -82,7 +82,7 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
- status = "disable";
+ status = "disabled";
};
serial at 70006040 {
@@ -90,7 +90,7 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
- status = "disable";
+ status = "disabled";
};
serial at 70006200 {
@@ -98,7 +98,7 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
- status = "disable";
+ status = "disabled";
};
serial at 70006300 {
@@ -106,7 +106,7 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
- status = "disable";
+ status = "disabled";
};
serial at 70006400 {
@@ -114,7 +114,7 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000c000 {
@@ -123,7 +123,7 @@
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000c400 {
@@ -132,7 +132,7 @@
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000c500 {
@@ -141,7 +141,7 @@
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000c700 {
@@ -150,7 +150,7 @@
interrupts = <0 120 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
i2c at 7000d000 {
@@ -159,7 +159,7 @@
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
pmc {
@@ -201,35 +201,35 @@
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s1: i2s at 70080400 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s2: i2s at 70080500 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s3: i2s at 70080600 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
- status = "disable";
+ status = "disabled";
};
tegra_i2s4: i2s at 70080700 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
- status = "disable";
+ status = "disabled";
};
};
@@ -237,28 +237,28 @@
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000000 0x200>;
interrupts = <0 14 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci at 78000200 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000200 0x200>;
interrupts = <0 15 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci at 78000400 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000400 0x200>;
interrupts = <0 19 0x04>;
- status = "disable";
+ status = "disabled";
};
sdhci at 78000600 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000600 0x200>;
interrupts = <0 31 0x04>;
- status = "disable";
+ status = "disabled";
};
pmu {
next prev parent reply other threads:[~2012-06-11 19:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-11 19:09 [PATCH] ARM: omap: Fix dts files w/ status property: "disable" -> "disabled" Roland Stigge
2012-06-11 19:09 ` Roland Stigge [this message]
2012-06-11 20:08 ` [PATCH] ARM: tegra: " Stephen Warren
2012-06-11 22:43 ` [PATCH] ARM: omap: " Cousson, Benoit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339441785-14641-2-git-send-email-stigge@antcom.de \
--to=stigge@antcom.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).