linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: richard.zhao@freescale.com (Richard Zhao)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v5 04/13] usb: chipidea: permit driver bindings pass phy pointer
Date: Wed, 13 Jun 2012 20:34:14 +0800	[thread overview]
Message-ID: <1339590863-10564-5-git-send-email-richard.zhao@freescale.com> (raw)
In-Reply-To: <1339590863-10564-1-git-send-email-richard.zhao@freescale.com>

Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/chipidea/ci.h    |    2 ++
 drivers/usb/chipidea/core.c  |    4 ++++
 drivers/usb/chipidea/host.c  |    1 +
 drivers/usb/chipidea/udc.c   |   11 +++++++----
 include/linux/usb/chipidea.h |    3 +++
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 9655e35..d738603 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -160,6 +160,8 @@ struct ci13xxx {
 
 	struct ci13xxx_platform_data	*platdata;
 	int				vbus_active;
+	/* FIXME: some day, we'll not use global phy */
+	bool				global_phy;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index c14ce2b..21407e7 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -419,6 +419,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 
 	ci->dev = dev;
 	ci->platdata = dev->platform_data;
+	if (ci->platdata->phy)
+		ci->transceiver = ci->platdata->phy;
+	else
+		ci->global_phy = true;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 4a4fdb8..ebff9f4 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -117,6 +117,7 @@ static int host_start(struct ci13xxx *ci)
 	hcd->has_tt = 1;
 
 	hcd->power_budget = ci->platdata->power_budget;
+	hcd->phy = ci->transceiver;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ca9b387..b43b29c 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
 
 	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	ci->transceiver = usb_get_transceiver();
+	if (ci->global_phy) {
+		ci->transceiver = usb_get_transceiver();
 
 	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (ci->transceiver == NULL) {
@@ -1728,7 +1729,8 @@ static int udc_start(struct ci13xxx *ci)
 remove_trans:
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
@@ -1737,7 +1739,7 @@ remove_dbg:
 unreg_device:
 	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (ci->transceiver)
+	if (ci->transceiver && ci->global_phy)
 		usb_put_transceiver(ci->transceiver);
 free_pools:
 	dma_pool_destroy(ci->td_pool);
@@ -1771,7 +1773,8 @@ static void udc_stop(struct ci13xxx *ci)
 
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, NULL);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 	dbg_remove_files(&ci->gadget.dev);
 	device_unregister(&ci->gadget.dev);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index be078f0..544825d 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
 #ifndef __LINUX_USB_CHIPIDEA_H
 #define __LINUX_USB_CHIPIDEA_H
 
+#include <linux/usb/otg.h>
+
 struct ci13xxx;
 struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
+	struct usb_phy	*phy;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.9.5

  parent reply	other threads:[~2012-06-13 12:34 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-13 12:34 [Patch v5 00/13] add imx usb driver for mx28/6x Richard Zhao
2012-06-13 12:34 ` [Patch v5 01/13] usb: otg: add notify_connect/notify_disconnect callback Richard Zhao
2012-06-13 12:34 ` [Patch v5 02/13] USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phy Richard Zhao
2012-06-13 18:17   ` Alan Stern
2012-06-13 12:34 ` [Patch v5 03/13] USB: notify phy when root hub port connect change Richard Zhao
2012-06-13 18:25   ` Alan Stern
2012-06-14  0:36     ` Richard Zhao
2012-06-14 14:11       ` Alan Stern
2012-06-13 12:34 ` Richard Zhao [this message]
2012-06-13 12:34 ` [Patch v5 05/13] usb: otg: add basic mxs phy driver support Richard Zhao
2012-06-13 21:33   ` Sascha Hauer
2012-06-13 21:56     ` Marek Vasut
2012-06-13 22:03       ` Sascha Hauer
2012-06-14  1:12       ` Richard Zhao
2012-06-13 12:34 ` [Patch v5 06/13] usb: chipidea: add imx platform driver Richard Zhao
2012-06-13 21:46   ` Sascha Hauer
2012-06-13 21:57     ` Marek Vasut
2012-06-13 22:07       ` Sascha Hauer
2012-06-14  1:21         ` Richard Zhao
2012-06-14  1:56     ` Richard Zhao
2012-06-13 12:34 ` [Patch v5 07/13] ARM: imx6q: correct device name of usbphy and usb controller clock export Richard Zhao
2012-06-13 12:34 ` [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios Richard Zhao
2012-06-13 15:09   ` Rob Herring
2012-06-13 15:19     ` Marek Vasut
2012-06-13 16:45       ` Rob Herring
2012-06-13 17:15         ` Marek Vasut
2012-06-13 15:28     ` Richard Zhao
2012-06-13 16:00       ` Marek Vasut
2012-06-15 15:34         ` Shawn Guo
2012-06-13 16:50       ` Rob Herring
2012-06-14  1:33         ` Richard Zhao
2012-06-20 14:29           ` Rob Herring
2012-06-20 15:05             ` Shawn Guo
2012-06-21 21:32               ` Rob Herring
2012-06-20 15:41             ` Stephen Warren
2012-06-21  1:32               ` Chen Peter-B29397
2012-06-21 22:22                 ` Stephen Warren
2012-06-22  0:03                   ` Chen Peter-B29397
2012-06-25 15:43                     ` Stephen Warren
2012-06-26  2:05                       ` Chen Peter-B29397
2012-06-19 23:36   ` Fabio Estevam
2012-06-19 23:41     ` Richard Zhao
2012-07-17 12:30   ` Dirk Behme
2012-07-19  2:15     ` Richard Zhao
2012-06-13 12:34 ` [Patch v5 09/13] ARM: imx6q: add usbphy clocks Richard Zhao
2012-06-13 21:54   ` Sascha Hauer
2012-06-14  0:15     ` Chen Peter-B29397
2012-06-13 12:34 ` [Patch v5 10/13] ARM: imx6q: disable usb charger detector Richard Zhao
2012-06-13 12:34 ` [Patch v5 11/13] ARM: dts: imx6q-sabrelite: add usb devices Richard Zhao
2012-06-19 23:39   ` Fabio Estevam
2012-06-13 12:34 ` [Patch v5 12/13] ARM: mxs: clk_register_clkdev mx28 usb clocks Richard Zhao
2012-06-13 12:34 ` [Patch v5 13/13] ARM: dts: imx28-evk: add usb devices Richard Zhao
2012-06-18 17:10 ` [Patch v5 00/13] add imx usb driver for mx28/6x Fabio Estevam
2012-06-18 17:13   ` Marek Vasut
2012-06-18 17:25     ` Fabio Estevam
2012-06-19  1:14       ` Chen Peter-B29397
2012-06-19  1:33         ` Fabio Estevam
2012-06-19  2:07           ` Marek Vasut
2012-06-19  2:17             ` Fabio Estevam
2012-06-19  6:14       ` Shawn Guo
2012-06-19 12:24         ` Fabio Estevam
2012-06-19 12:38           ` Shawn Guo
2012-06-19 13:54             ` Fabio Estevam
2012-06-19 18:34               ` Fabio Estevam
2012-06-19 19:03                 ` Dirk Behme
2012-06-19 12:59           ` Marek Vasut
2012-06-20 17:53 ` Subodh Nijsure

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1339590863-10564-5-git-send-email-richard.zhao@freescale.com \
    --to=richard.zhao@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).