From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/16] Enable SPARSE_IRQ support for imx
Date: Thu, 14 Jun 2012 13:59:31 +0800 [thread overview]
Message-ID: <1339653587-4832-1-git-send-email-shawn.guo@linaro.org> (raw)
It seems that the lack of SPARSE_IRQ support becomes the last blocker
for imx being built with multi-platform. The series is to enable
SPARSE_IRQ for imx by having all the irqchips allocate their irq_descs.
Along with the change, a legacy irqdomain is added for each of these
irqchips (except ipu_irq) to help the mapping between hardware irq and
Linux irq number, which is required by DT boot but also benefits non-DT.
Based on v3.5-rc2. Boot tested on imx3, imx5 and imx6, and compile
tested with imx_v4_v5_defconfig.
Shawn Guo (16):
ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()
ARM: imx: eliminate macro IOMUX_TO_IRQ()
ARM: imx: eliminate macro IRQ_GPIOx()
gpio/mxc: move irq_domain_add_legacy call into gpio driver
ARM: imx: move irq_domain_add_legacy call into tzic driver
ARM: imx: move irq_domain_add_legacy call into avic driver
dma: ipu: remove the use of ipu_platform_data
ARM: imx: leave irq_base of wm8350_platform_data uninitialized
ARM: imx: pass gpio than irq number into mxc_expio_init
ARM: imx: add a legacy irqdomain for 3ds_debugboard
ARM: imx: add a legacy irqdomain for mx31ads
i2c: imx: remove unneeded mach/irqs.h inclusion
ARM: imx: remove unneeded mach/irq.h inclusion
tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
ARM: fiq: save FIQ_START by passing absolute fiq number
ARM: imx: enable SPARSE_IRQ for imx platform
arch/arm/Kconfig | 1 +
arch/arm/kernel/fiq.c | 4 +-
arch/arm/mach-imx/devices-imx31.h | 4 +-
arch/arm/mach-imx/devices-imx35.h | 4 +-
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 3 +-
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 6 +-
arch/arm/mach-imx/imx27-dt.c | 28 ---
arch/arm/mach-imx/imx51-dt.c | 27 ---
arch/arm/mach-imx/imx53-dt.c | 27 ---
arch/arm/mach-imx/mach-apf9328.c | 7 +-
arch/arm/mach-imx/mach-armadillo5x0.c | 18 +-
arch/arm/mach-imx/mach-cpuimx27.c | 12 +-
arch/arm/mach-imx/mach-cpuimx35.c | 3 +-
arch/arm/mach-imx/mach-cpuimx51sd.c | 3 +-
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 9 +-
arch/arm/mach-imx/mach-imx6q.c | 14 --
arch/arm/mach-imx/mach-kzm_arm11_01.c | 20 ++-
arch/arm/mach-imx/mach-mx1ads.c | 1 -
arch/arm/mach-imx/mach-mx21ads.c | 16 ++-
arch/arm/mach-imx/mach-mx27_3ds.c | 7 +-
arch/arm/mach-imx/mach-mx27ads.c | 12 +-
arch/arm/mach-imx/mach-mx31_3ds.c | 18 +--
arch/arm/mach-imx/mach-mx31ads.c | 63 ++++---
arch/arm/mach-imx/mach-mx31lilly.c | 10 +-
arch/arm/mach-imx/mach-mx31lite.c | 11 +-
arch/arm/mach-imx/mach-mx31moboard.c | 10 +-
arch/arm/mach-imx/mach-mx35_3ds.c | 18 +--
arch/arm/mach-imx/mach-mx51_3ds.c | 3 +-
arch/arm/mach-imx/mach-mx53_ard.c | 5 +-
arch/arm/mach-imx/mach-mxt_td60.c | 6 +-
arch/arm/mach-imx/mach-pca100.c | 5 +-
arch/arm/mach-imx/mach-pcm037.c | 24 ++--
arch/arm/mach-imx/mach-pcm038.c | 4 +-
arch/arm/mach-imx/mach-pcm043.c | 6 +-
arch/arm/mach-imx/mach-qong.c | 10 +-
arch/arm/mach-imx/mach-scb9328.c | 7 +-
arch/arm/mach-imx/mach-vpr200.c | 10 +-
arch/arm/mach-imx/mm-imx1.c | 1 -
arch/arm/mach-imx/mm-imx21.c | 1 -
arch/arm/mach-imx/mm-imx25.c | 1 -
arch/arm/mach-imx/mm-imx27.c | 1 -
arch/arm/mach-imx/mm-imx3.c | 1 -
arch/arm/mach-imx/mx31lilly-db.c | 11 +-
arch/arm/mach-imx/mx31lite-db.c | 5 +-
arch/arm/mach-imx/mx51_efika.c | 3 +-
arch/arm/mach-imx/pcm970-baseboard.c | 13 +-
arch/arm/mach-rpc/include/mach/irqs.h | 12 +-
arch/arm/plat-mxc/3ds_debugboard.c | 50 +++---
arch/arm/plat-mxc/avic.c | 26 ++-
arch/arm/plat-mxc/devices/platform-ipu-core.c | 5 +-
arch/arm/plat-mxc/include/mach/3ds_debugboard.h | 2 +-
arch/arm/plat-mxc/include/mach/devices-common.h | 4 +-
arch/arm/plat-mxc/include/mach/hardware.h | 2 -
arch/arm/plat-mxc/include/mach/iomux-mx3.h | 3 -
arch/arm/plat-mxc/include/mach/iomux-v1.h | 7 -
arch/arm/plat-mxc/include/mach/ipu.h | 4 -
arch/arm/plat-mxc/include/mach/irqs.h | 44 -----
arch/arm/plat-mxc/include/mach/mx1.h | 111 ++++++------
arch/arm/plat-mxc/include/mach/mx21.h | 107 ++++++------
arch/arm/plat-mxc/include/mach/mx25.h | 72 ++++----
arch/arm/plat-mxc/include/mach/mx27.h | 127 +++++++-------
arch/arm/plat-mxc/include/mach/mx2x.h | 87 +++++-----
arch/arm/plat-mxc/include/mach/mx31.h | 118 +++++++------
arch/arm/plat-mxc/include/mach/mx35.h | 109 ++++++------
arch/arm/plat-mxc/include/mach/mx3x.h | 77 ++++----
arch/arm/plat-mxc/include/mach/mx50.h | 187 ++++++++++----------
arch/arm/plat-mxc/include/mach/mx51.h | 209 +++++++++++-----------
arch/arm/plat-mxc/include/mach/mx53.h | 217 ++++++++++++-----------
arch/arm/plat-mxc/tzic.c | 28 ++-
drivers/dma/ipu/ipu_idmac.c | 8 +-
drivers/dma/ipu/ipu_irq.c | 14 +-
drivers/gpio/gpio-mxc.c | 56 ++++---
drivers/i2c/busses/i2c-imx.c | 1 -
drivers/media/video/mx1_camera.c | 1 +
drivers/tty/serial/imx.c | 6 +-
sound/soc/fsl/imx-pcm-fiq.c | 1 +
76 files changed, 1041 insertions(+), 1127 deletions(-)
--
1.7.5.4
next reply other threads:[~2012-06-14 5:59 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-14 5:59 Shawn Guo [this message]
2012-06-14 5:59 ` [PATCH 01/16] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ() Shawn Guo
2012-06-14 7:31 ` Dong Aisheng
2012-06-14 7:39 ` Shawn Guo
2012-06-14 8:04 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 02/16] ARM: imx: eliminate macro IOMUX_TO_IRQ() Shawn Guo
2012-06-14 7:59 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 03/16] ARM: imx: eliminate macro IRQ_GPIOx() Shawn Guo
2012-06-15 9:23 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 04/16] gpio/mxc: move irq_domain_add_legacy call into gpio driver Shawn Guo
2012-06-15 9:26 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 05/16] ARM: imx: move irq_domain_add_legacy call into tzic driver Shawn Guo
2012-06-15 9:29 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 06/16] ARM: imx: move irq_domain_add_legacy call into avic driver Shawn Guo
2012-06-14 7:13 ` Shawn Guo
2012-06-15 9:30 ` Dong Aisheng
2012-07-06 6:26 ` [PATCH] ARM: imx: select IRQ_DOMAIN Uwe Kleine-König
2012-07-06 7:05 ` Shawn Guo
2012-07-06 7:07 ` Uwe Kleine-König
2012-07-06 7:12 ` Sascha Hauer
2012-07-06 7:18 ` [PATCH] ARM: imx: select USE_OF Uwe Kleine-König
2012-07-06 7:31 ` Shawn Guo
2012-07-06 7:47 ` [PATCH v2] " Uwe Kleine-König
2012-07-06 8:04 ` Shawn Guo
2012-07-06 19:15 ` Arnd Bergmann
2012-06-14 5:59 ` [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data Shawn Guo
2012-06-14 10:26 ` Vinod Koul
2012-06-15 9:37 ` Dong Aisheng
2012-06-16 3:01 ` Shawn Guo
2012-06-18 8:19 ` Dong Aisheng
2012-06-18 14:02 ` Shawn Guo
2012-06-19 5:51 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 08/16] ARM: imx: leave irq_base of wm8350_platform_data uninitialized Shawn Guo
2012-06-15 12:20 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 09/16] ARM: imx: pass gpio than irq number into mxc_expio_init Shawn Guo
2012-06-15 12:21 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 10/16] ARM: imx: add a legacy irqdomain for 3ds_debugboard Shawn Guo
2012-06-15 12:22 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 11/16] ARM: imx: add a legacy irqdomain for mx31ads Shawn Guo
2012-06-18 8:20 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 12/16] i2c: imx: remove unneeded mach/irqs.h inclusion Shawn Guo
2012-06-14 7:30 ` Wolfram Sang
2012-06-18 8:20 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 13/16] ARM: imx: remove unneeded mach/irq.h inclusion Shawn Guo
2012-06-18 8:21 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 14/16] tty: serial: imx: remove the use of MXC_INTERNAL_IRQS Shawn Guo
2012-06-14 15:37 ` Greg Kroah-Hartman
2012-06-18 8:22 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number Shawn Guo
2012-06-18 8:39 ` Dong Aisheng
2012-06-18 14:31 ` Shawn Guo
2012-06-18 16:44 ` Russell King - ARM Linux
2012-06-19 5:26 ` Shawn Guo
2012-06-20 22:55 ` Russell King - ARM Linux
2012-06-20 23:40 ` Shawn Guo
2012-06-20 23:53 ` Shawn Guo
2012-06-21 7:37 ` Russell King - ARM Linux
2012-06-21 8:50 ` Shawn Guo
2012-06-25 16:10 ` Shawn Guo
2012-06-14 5:59 ` [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform Shawn Guo
2012-06-14 7:40 ` Haojian Zhuang
2012-06-14 7:55 ` Shawn Guo
2012-06-18 8:48 ` Dong Aisheng
2012-06-18 15:04 ` Shawn Guo
2012-06-19 6:16 ` Dong Aisheng
2012-06-19 6:47 ` Shawn Guo
2012-06-19 7:21 ` Dong Aisheng
2012-06-19 7:43 ` Shawn Guo
2012-06-19 13:01 ` Dong Aisheng
2012-06-19 13:19 ` [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx Dong Aisheng
2012-06-19 14:06 ` Shawn Guo
2012-06-20 2:23 ` Dong Aisheng
2012-06-20 5:40 ` Shawn Guo
2012-06-20 6:40 ` Dong Aisheng
2012-06-20 12:57 ` Shawn Guo
2012-06-20 14:45 ` Dong Aisheng
2012-06-14 8:00 ` [PATCH 00/16] Enable SPARSE_IRQ support " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339653587-4832-1-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).