From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/16] ARM: imx: move irq_domain_add_legacy call into avic driver
Date: Thu, 14 Jun 2012 13:59:37 +0800 [thread overview]
Message-ID: <1339653587-4832-7-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1339653587-4832-1-git-send-email-shawn.guo@linaro.org>
Move irq_domain_add_legacy call from imx27-dt.c into avic init function
and have the avic driver adopt irqdomain support for both DT and non-DT
boot.
Now avic init function calls irq_alloc_descs to get irq_base and adds
a lenacy irqdomain with the irq_base, so that the mapping between avic
irq and Linux irq number can be handled by irqdomain.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/imx27-dt.c | 15 ---------------
arch/arm/plat-mxc/avic.c | 26 +++++++++++++++++++-------
2 files changed, 19 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index c734e56..5142ef0 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -10,7 +10,6 @@
*/
#include <linux/irq.h>
-#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
@@ -33,22 +32,8 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
{ /* sentinel */ }
};
-static int __init imx27_avic_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static const struct of_device_id imx27_irq_match[] __initconst = {
- { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, },
- { /* sentinel */ }
-};
-
static void __init imx27_dt_init(void)
{
- of_irq_init(imx27_irq_match);
-
of_platform_populate(NULL, of_default_bus_match_table,
imx27_auxdata_lookup, NULL);
}
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 689f81f..4fe1d9b 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -19,7 +19,9 @@
#include <linux/module.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <mach/common.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
@@ -50,6 +52,7 @@
#define AVIC_NUM_IRQS 64
void __iomem *avic_base;
+static struct irq_domain *domain;
static u32 avic_saved_mask_reg[2];
@@ -108,7 +111,7 @@ static void avic_irq_suspend(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct irq_chip_type *ct = gc->chip_types;
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
@@ -118,7 +121,7 @@ static void avic_irq_resume(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct irq_chip_type *ct = gc->chip_types;
- int idx = gc->irq_base >> 5;
+ int idx = d->hwirq >> 5;
__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
}
@@ -128,11 +131,10 @@ static void avic_irq_resume(struct irq_data *d)
#define avic_irq_resume NULL
#endif
-static __init void avic_init_gc(unsigned int irq_start)
+static __init void avic_init_gc(int idx, unsigned int irq_start)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- int idx = irq_start >> 5;
gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
handle_level_irq);
@@ -161,7 +163,7 @@ asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
if (nivector == 0xffff)
break;
- handle_IRQ(nivector, regs);
+ handle_IRQ(irq_find_mapping(domain, nivector), regs);
} while (1);
}
@@ -172,6 +174,8 @@ asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
*/
void __init mxc_init_irq(void __iomem *irqbase)
{
+ struct device_node *np;
+ int irq_base;
int i;
avic_base = irqbase;
@@ -190,8 +194,16 @@ void __init mxc_init_irq(void __iomem *irqbase)
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
- for (i = 0; i < AVIC_NUM_IRQS; i += 32)
- avic_init_gc(i);
+ irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
+ avic_init_gc(i, irq_base);
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
--
1.7.5.4
next prev parent reply other threads:[~2012-06-14 5:59 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-14 5:59 [PATCH 00/16] Enable SPARSE_IRQ support for imx Shawn Guo
2012-06-14 5:59 ` [PATCH 01/16] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ() Shawn Guo
2012-06-14 7:31 ` Dong Aisheng
2012-06-14 7:39 ` Shawn Guo
2012-06-14 8:04 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 02/16] ARM: imx: eliminate macro IOMUX_TO_IRQ() Shawn Guo
2012-06-14 7:59 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 03/16] ARM: imx: eliminate macro IRQ_GPIOx() Shawn Guo
2012-06-15 9:23 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 04/16] gpio/mxc: move irq_domain_add_legacy call into gpio driver Shawn Guo
2012-06-15 9:26 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 05/16] ARM: imx: move irq_domain_add_legacy call into tzic driver Shawn Guo
2012-06-15 9:29 ` Dong Aisheng
2012-06-14 5:59 ` Shawn Guo [this message]
2012-06-14 7:13 ` [PATCH 06/16] ARM: imx: move irq_domain_add_legacy call into avic driver Shawn Guo
2012-06-15 9:30 ` Dong Aisheng
2012-07-06 6:26 ` [PATCH] ARM: imx: select IRQ_DOMAIN Uwe Kleine-König
2012-07-06 7:05 ` Shawn Guo
2012-07-06 7:07 ` Uwe Kleine-König
2012-07-06 7:12 ` Sascha Hauer
2012-07-06 7:18 ` [PATCH] ARM: imx: select USE_OF Uwe Kleine-König
2012-07-06 7:31 ` Shawn Guo
2012-07-06 7:47 ` [PATCH v2] " Uwe Kleine-König
2012-07-06 8:04 ` Shawn Guo
2012-07-06 19:15 ` Arnd Bergmann
2012-06-14 5:59 ` [PATCH 07/16] dma: ipu: remove the use of ipu_platform_data Shawn Guo
2012-06-14 10:26 ` Vinod Koul
2012-06-15 9:37 ` Dong Aisheng
2012-06-16 3:01 ` Shawn Guo
2012-06-18 8:19 ` Dong Aisheng
2012-06-18 14:02 ` Shawn Guo
2012-06-19 5:51 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 08/16] ARM: imx: leave irq_base of wm8350_platform_data uninitialized Shawn Guo
2012-06-15 12:20 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 09/16] ARM: imx: pass gpio than irq number into mxc_expio_init Shawn Guo
2012-06-15 12:21 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 10/16] ARM: imx: add a legacy irqdomain for 3ds_debugboard Shawn Guo
2012-06-15 12:22 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 11/16] ARM: imx: add a legacy irqdomain for mx31ads Shawn Guo
2012-06-18 8:20 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 12/16] i2c: imx: remove unneeded mach/irqs.h inclusion Shawn Guo
2012-06-14 7:30 ` Wolfram Sang
2012-06-18 8:20 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 13/16] ARM: imx: remove unneeded mach/irq.h inclusion Shawn Guo
2012-06-18 8:21 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 14/16] tty: serial: imx: remove the use of MXC_INTERNAL_IRQS Shawn Guo
2012-06-14 15:37 ` Greg Kroah-Hartman
2012-06-18 8:22 ` Dong Aisheng
2012-06-14 5:59 ` [PATCH 15/16] ARM: fiq: save FIQ_START by passing absolute fiq number Shawn Guo
2012-06-18 8:39 ` Dong Aisheng
2012-06-18 14:31 ` Shawn Guo
2012-06-18 16:44 ` Russell King - ARM Linux
2012-06-19 5:26 ` Shawn Guo
2012-06-20 22:55 ` Russell King - ARM Linux
2012-06-20 23:40 ` Shawn Guo
2012-06-20 23:53 ` Shawn Guo
2012-06-21 7:37 ` Russell King - ARM Linux
2012-06-21 8:50 ` Shawn Guo
2012-06-25 16:10 ` Shawn Guo
2012-06-14 5:59 ` [PATCH 16/16] ARM: imx: enable SPARSE_IRQ for imx platform Shawn Guo
2012-06-14 7:40 ` Haojian Zhuang
2012-06-14 7:55 ` Shawn Guo
2012-06-18 8:48 ` Dong Aisheng
2012-06-18 15:04 ` Shawn Guo
2012-06-19 6:16 ` Dong Aisheng
2012-06-19 6:47 ` Shawn Guo
2012-06-19 7:21 ` Dong Aisheng
2012-06-19 7:43 ` Shawn Guo
2012-06-19 13:01 ` Dong Aisheng
2012-06-19 13:19 ` [RFC PATCH 1/1] ARM: imx: enable SPARSE_IRQ for imx Dong Aisheng
2012-06-19 14:06 ` Shawn Guo
2012-06-20 2:23 ` Dong Aisheng
2012-06-20 5:40 ` Shawn Guo
2012-06-20 6:40 ` Dong Aisheng
2012-06-20 12:57 ` Shawn Guo
2012-06-20 14:45 ` Dong Aisheng
2012-06-14 8:00 ` [PATCH 00/16] Enable SPARSE_IRQ support " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339653587-4832-7-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).