linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 16/17] i2c: omap: simplify IRQ exit path
Date: Thu, 14 Jun 2012 13:20:49 +0300	[thread overview]
Message-ID: <1339669250-9183-17-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1339669250-9183-1-git-send-email-balbi@ti.com>

instead of having multiple return points, use
a goto statement to make that clearer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   33 ++++++++++++---------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 5b78a73..6e75d03 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -889,33 +889,27 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			stat &= ~(OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_RRDY);
 		}
 
-		if (!stat) {
-			/* my work here is done */
-			omap_i2c_complete_cmd(dev, err);
-			return IRQ_HANDLED;
-		}
+		if (!stat)
+			goto out;
 
 		dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
 		if (count++ == 100) {
 			dev_warn(dev->dev, "Too much work in one IRQ\n");
-			omap_i2c_complete_cmd(dev, err);
-			return IRQ_HANDLED;
+			goto out;
 		}
 
 		if (stat & OMAP_I2C_STAT_NACK) {
 			dev_err(dev->dev, "No Acknowledge\n");
 			err |= OMAP_I2C_STAT_NACK;
 			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK);
-			omap_i2c_complete_cmd(dev, err);
-			return IRQ_HANDLED;
+			goto out;
 		}
 
 		if (stat & OMAP_I2C_STAT_AL) {
 			dev_err(dev->dev, "Arbitration lost\n");
 			err |= OMAP_I2C_STAT_AL;
 			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK);
-			omap_i2c_complete_cmd(dev, err);
-			return IRQ_HANDLED;
+			goto out;
 		}
 
 		/*
@@ -928,8 +922,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
 						OMAP_I2C_STAT_XRDY |
 						OMAP_I2C_STAT_XDR |
 						OMAP_I2C_STAT_ARDY));
-			omap_i2c_complete_cmd(dev, err);
-			return IRQ_HANDLED;
+			goto out;
 		}
 
 		if (stat & OMAP_I2C_STAT_RDR) {
@@ -970,8 +963,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
 				err |= OMAP_I2C_STAT_XUDF;
 				omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XUDF |
 						OMAP_I2C_STAT_XDR);
-				omap_i2c_complete_cmd(dev, err);
-				return IRQ_HANDLED;
+				goto out;
 			}
 
 			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR);
@@ -990,8 +982,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
 				err |= OMAP_I2C_STAT_XUDF;
 				omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XUDF |
 						OMAP_I2C_STAT_XRDY);
-				omap_i2c_complete_cmd(dev, err);
-				return IRQ_HANDLED;
+				goto out;
 			}
 
 			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY);
@@ -1002,19 +993,19 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			dev_err(dev->dev, "Receive overrun\n");
 			err |= OMAP_I2C_STAT_ROVR;
 			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ROVR);
-			omap_i2c_complete_cmd(dev, err);
-			return IRQ_HANDLED;
+			goto out;
 		}
 
 		if (stat & OMAP_I2C_STAT_XUDF) {
 			dev_err(dev->dev, "Transmit underflow\n");
 			err |= OMAP_I2C_STAT_XUDF;
 			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XUDF);
-			omap_i2c_complete_cmd(dev, err);
-			return IRQ_HANDLED;
+			goto out;
 		}
 	} while (stat);
 
+out:
+	omap_i2c_complete_cmd(dev, err);
 	return IRQ_HANDLED;
 }
 
-- 
1.7.10.4

  parent reply	other threads:[~2012-06-14 10:20 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-14 10:20 [PATCH 00/17] Big OMAP I2C Cleanup Felipe Balbi
2012-06-14 10:20 ` [PATCH 01/17] i2c: omap: simplify num_bytes handling Felipe Balbi
2012-06-14 10:33   ` Shilimkar, Santosh
2012-06-14 10:20 ` [PATCH 02/17] i2c: omap: decrease indentation level on data handling Felipe Balbi
2012-06-14 10:41   ` Shilimkar, Santosh
2012-06-14 10:40     ` Felipe Balbi
2012-06-14 10:20 ` [PATCH 03/17] i2c: omap: add blank lines Felipe Balbi
2012-06-14 10:43   ` Shilimkar, Santosh
2012-06-14 10:20 ` [PATCH 04/17] i2c: omap: simplify omap_i2c_ack_stat() Felipe Balbi
2012-06-14 10:45   ` Shilimkar, Santosh
2012-06-14 11:13   ` Russell King - ARM Linux
2012-06-14 11:45     ` Felipe Balbi
2012-06-14 10:20 ` [PATCH 05/17] i2c: omap: split out [XR]DR and [XR]RDY Felipe Balbi
2012-06-14 10:20 ` [PATCH 06/17] i2c: omap: improve 1p153 errata handling Felipe Balbi
2012-06-14 11:01   ` Shilimkar, Santosh
2012-06-14 11:17   ` Russell King - ARM Linux
2012-06-14 11:48     ` Felipe Balbi
2012-06-14 10:20 ` [PATCH 07/17] i2c: omap: re-factor receive/transmit data loop Felipe Balbi
2012-06-14 10:20 ` [PATCH 08/17] i2c: omap: switch over to do {} while loop Felipe Balbi
2012-06-14 11:03   ` Shilimkar, Santosh
2012-06-14 11:05     ` Felipe Balbi
2012-06-14 10:20 ` [PATCH 09/17] i2c: omap: ack IRQ in parts Felipe Balbi
2012-06-14 11:11   ` Shilimkar, Santosh
2012-06-14 11:46     ` Felipe Balbi
2012-06-14 11:20   ` Russell King - ARM Linux
2012-06-14 11:47     ` Felipe Balbi
2012-06-14 10:20 ` [PATCH 10/17] i2c: omap: get rid of the "complete" label Felipe Balbi
2012-06-14 10:20 ` [PATCH 11/17] i2c: omap: switch to devm_* API Felipe Balbi
2012-06-14 10:20 ` [PATCH 12/17] i2c: omap: switch to platform_get_irq() Felipe Balbi
2012-06-14 10:20 ` [PATCH 13/17] i2c: omap: bus: add a receiver flag Felipe Balbi
2012-06-14 10:20 ` [PATCH 14/17] i2c: omap: simplify errata check Felipe Balbi
2012-06-14 10:20 ` [PATCH 15/17] i2c: omap: always return IRQ_HANDLED Felipe Balbi
2012-06-14 11:18   ` Shilimkar, Santosh
2012-06-14 11:23     ` Russell King - ARM Linux
2012-06-14 11:25       ` Shilimkar, Santosh
2012-06-14 10:20 ` Felipe Balbi [this message]
2012-06-14 10:20 ` [PATCH 17/17] i2c: omap: resize fifos before each message Felipe Balbi
2012-06-14 11:23 ` [PATCH 00/17] Big OMAP I2C Cleanup Shilimkar, Santosh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1339669250-9183-17-git-send-email-balbi@ti.com \
    --to=balbi@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).