From mboxrd@z Thu Jan 1 00:00:00 1970 From: balbi@ti.com (Felipe Balbi) Date: Thu, 14 Jun 2012 19:24:24 +0300 Subject: [PATCH v2 14/17] i2c: omap: simplify errata check In-Reply-To: <1339691067-919-1-git-send-email-balbi@ti.com> References: <1339691067-919-1-git-send-email-balbi@ti.com> Message-ID: <1339691067-919-15-git-send-email-balbi@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org omap_i2c_dev is allocated with kzalloc(), so we need not initialize b_hw to zero. Signed-off-by: Felipe Balbi --- drivers/i2c/busses/i2c-omap.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6a7395a..6e97d86 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1138,9 +1138,7 @@ omap_i2c_probe(struct platform_device *pdev) dev->fifo_size = (dev->fifo_size / 2); - if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) - dev->b_hw = 0; /* Disable hardware fixes */ - else + if (dev->rev < OMAP_I2C_REV_ON_3530_4430) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ -- 1.7.10.4