From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/17] i2c: omap: simplify omap_i2c_ack_stat()
Date: Thu, 14 Jun 2012 19:24:14 +0300 [thread overview]
Message-ID: <1339691067-919-5-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1339691067-919-1-git-send-email-balbi@ti.com>
stat & BIT(1) is the same as BIT(1), so let's
simplify things a bit by removing "stat &" from
all omap_i2c_ack_stat() calls.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-by : Santosh Shilimkar <santosh.shilimkar@ti.com>
---
drivers/i2c/busses/i2c-omap.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 07ae391..fa9ddb6 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -774,8 +774,8 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
while (--timeout && !(*stat & OMAP_I2C_STAT_XUDF)) {
if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
- omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
- OMAP_I2C_STAT_XDR));
+ omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY |
+ OMAP_I2C_STAT_XDR));
*err |= OMAP_I2C_STAT_XUDF;
return -ETIMEDOUT;
}
@@ -835,10 +835,11 @@ complete:
*/
if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
OMAP_I2C_STAT_AL)) {
- omap_i2c_ack_stat(dev, stat &
- (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
- OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR |
- OMAP_I2C_STAT_ARDY));
+ omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY |
+ OMAP_I2C_STAT_RDR |
+ OMAP_I2C_STAT_XRDY |
+ OMAP_I2C_STAT_XDR |
+ OMAP_I2C_STAT_ARDY));
omap_i2c_complete_cmd(dev, err);
return IRQ_HANDLED;
}
@@ -885,8 +886,8 @@ complete:
}
}
}
- omap_i2c_ack_stat(dev,
- stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
+ omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY |
+ OMAP_I2C_STAT_RDR));
continue;
}
@@ -933,8 +934,8 @@ complete:
omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
}
- omap_i2c_ack_stat(dev,
- stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+ omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY |
+ OMAP_I2C_STAT_XDR));
continue;
}
--
1.7.10.4
next prev parent reply other threads:[~2012-06-14 16:24 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-14 16:24 [PATCH v2 00/17] Big OMAP I2C Cleanup Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 01/17] i2c: omap: simplify num_bytes handling Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 02/17] i2c: omap: decrease indentation level on data handling Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 03/17] i2c: omap: add blank lines Felipe Balbi
2012-06-14 16:24 ` Felipe Balbi [this message]
2012-06-14 16:24 ` [PATCH v2 05/17] i2c: omap: split out [XR]DR and [XR]RDY Felipe Balbi
2012-06-26 10:41 ` Shubhrajyoti
2012-07-02 11:33 ` Felipe Balbi
2012-07-02 11:51 ` Shubhrajyoti
2012-06-14 16:24 ` [PATCH v2 06/17] i2c: omap: improve 1p153 errata handling Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 07/17] i2c: omap: re-factor receive/transmit data loop Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 08/17] i2c: omap: switch over to do {} while loop Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 09/17] i2c: omap: ack IRQ in parts Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 10/17] i2c: omap: get rid of the "complete" label Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 11/17] i2c: omap: switch to devm_* API Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 12/17] i2c: omap: switch to platform_get_irq() Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 13/17] i2c: omap: bus: add a receiver flag Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 14/17] i2c: omap: simplify errata check Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 15/17] i2c: omap: always return IRQ_HANDLED Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 16/17] i2c: omap: simplify IRQ exit path Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 17/17] i2c: omap: resize fifos before each message Felipe Balbi
2012-06-14 17:59 ` [PATCH v2 00/17] Big OMAP I2C Cleanup Wolfram Sang
2012-06-26 10:51 ` Shubhrajyoti
2012-07-02 11:37 ` Felipe Balbi
2012-07-02 11:53 ` Shubhrajyoti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339691067-919-5-git-send-email-balbi@ti.com \
--to=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).