linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 06/17] i2c: omap: improve 1p153 errata handling
Date: Thu, 14 Jun 2012 19:24:16 +0300	[thread overview]
Message-ID: <1339691067-919-7-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1339691067-919-1-git-send-email-balbi@ti.com>

Make it not depend on ISR's local variables
in order to make it easier to re-factor the
transmit data loop.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   45 ++++++++++++++++++++++++++++++-----------
 1 file changed, 33 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0661ca1..41cec32 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -768,21 +768,24 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id)
  * data to DATA_REG. Otherwise some data bytes can be lost while transferring
  * them from the memory to the I2C interface.
  */
-static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
+static int errata_omap3_1p153(struct omap_i2c_dev *dev)
 {
 	unsigned long timeout = 10000;
+	u16 stat;
 
-	while (--timeout && !(*stat & OMAP_I2C_STAT_XUDF)) {
-		if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+	do {
+		stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+		if (stat & OMAP_I2C_STAT_XUDF)
+			break;
+
+		if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
 			omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY |
 					OMAP_I2C_STAT_XDR));
-			*err |= OMAP_I2C_STAT_XUDF;
 			return -ETIMEDOUT;
 		}
 
 		cpu_relax();
-		*stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
-	}
+	} while (--timeout);
 
 	if (!timeout) {
 		dev_err(dev->dev, "timeout waiting on XUDF bit\n");
@@ -946,9 +949,18 @@ complete:
 					}
 				}
 
-				if ((dev->errata & I2C_OMAP3_1P153) &&
-				    errata_omap3_1p153(dev, &stat, &err))
-					goto complete;
+				if (dev->errata & I2C_OMAP3_1P153) {
+					int ret;
+
+					ret = errata_omap3_1p153(dev);
+					stat = omap_i2c_read_reg(dev,
+							OMAP_I2C_STAT_REG);
+
+					if (ret < 0) {
+						err |= OMAP_I2C_STAT_XUDF;
+						goto complete;
+					}
+				}
 
 				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 			}
@@ -986,9 +998,18 @@ complete:
 					}
 				}
 
-				if ((dev->errata & I2C_OMAP3_1P153) &&
-				    errata_omap3_1p153(dev, &stat, &err))
-					goto complete;
+				if (dev->errata & I2C_OMAP3_1P153) {
+					int ret;
+
+					ret = errata_omap3_1p153(dev);
+					stat = omap_i2c_read_reg(dev,
+							OMAP_I2C_STAT_REG);
+
+					if (ret < 0) {
+						err |= OMAP_I2C_STAT_XUDF;
+						goto complete;
+					}
+				}
 
 				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 			}
-- 
1.7.10.4

  parent reply	other threads:[~2012-06-14 16:24 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-14 16:24 [PATCH v2 00/17] Big OMAP I2C Cleanup Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 01/17] i2c: omap: simplify num_bytes handling Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 02/17] i2c: omap: decrease indentation level on data handling Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 03/17] i2c: omap: add blank lines Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 04/17] i2c: omap: simplify omap_i2c_ack_stat() Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 05/17] i2c: omap: split out [XR]DR and [XR]RDY Felipe Balbi
2012-06-26 10:41   ` Shubhrajyoti
2012-07-02 11:33     ` Felipe Balbi
2012-07-02 11:51       ` Shubhrajyoti
2012-06-14 16:24 ` Felipe Balbi [this message]
2012-06-14 16:24 ` [PATCH v2 07/17] i2c: omap: re-factor receive/transmit data loop Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 08/17] i2c: omap: switch over to do {} while loop Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 09/17] i2c: omap: ack IRQ in parts Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 10/17] i2c: omap: get rid of the "complete" label Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 11/17] i2c: omap: switch to devm_* API Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 12/17] i2c: omap: switch to platform_get_irq() Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 13/17] i2c: omap: bus: add a receiver flag Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 14/17] i2c: omap: simplify errata check Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 15/17] i2c: omap: always return IRQ_HANDLED Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 16/17] i2c: omap: simplify IRQ exit path Felipe Balbi
2012-06-14 16:24 ` [PATCH v2 17/17] i2c: omap: resize fifos before each message Felipe Balbi
2012-06-14 17:59 ` [PATCH v2 00/17] Big OMAP I2C Cleanup Wolfram Sang
2012-06-26 10:51   ` Shubhrajyoti
2012-07-02 11:37     ` Felipe Balbi
2012-07-02 11:53       ` Shubhrajyoti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1339691067-919-7-git-send-email-balbi@ti.com \
    --to=balbi@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).