From mboxrd@z Thu Jan 1 00:00:00 1970 From: dedekind1@gmail.com (Artem Bityutskiy) Date: Wed, 27 Jun 2012 07:28:40 +0300 Subject: [PATCH v11 0/4] MTD: at91: Add PMECC support for at91 nand flash driver In-Reply-To: <4FEA87E5.9010604@atmel.com> References: <1340618866-28776-1-git-send-email-josh.wu@atmel.com> <1340768981.2317.7.camel@koala> <4FEA87E5.9010604@atmel.com> Message-ID: <1340771320.2317.13.camel@koala> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, 2012-06-27 at 12:11 +0800, Josh Wu wrote: > Hi, Artem > > On 6/27/2012 11:49 AM, Artem Bityutskiy wrote: > > On Mon, 2012-06-25 at 18:07 +0800, Josh Wu wrote: > >> Those patches is based on v3.5-rc4 > >> > >> Changes since v10, > >> add one more patch in this patch set, which add 'int' return value for write_page()/write_page_raw() functions in structure of nand_ecc_ctrl. > >> Instead of calling BUG(), atmel_nand_pmecc_write_page() will return -EIO when time out to read the pmecc status register. > >> increase the time-out duration to 100ms, which has more toleration. > >> add oob_required argument for pmecc read/write functions to align with v3.5-rc4. > > I have issues compiling l2-mtd.git tree (based on 3.5-rc5) with the > > attached defconfig. Probably not your fault, but may be you have a > > fix/suggestion? I did not have time to look closer. Aiaiai reports: > > I think the name of kernel config for AT91 is changed, so you can try > add following two line in your original config file. > > CONFIG_SOC_AT91SAM9=y > CONFIG_SOC_AT91RM9200=y > > run the make menuconfig will get new config, that can pass the compile. I get "arm-unknown-linux-gnueabi-ld: no machine record defined". I think it wants me to select the board. I've tried one and get another compilation issue: arch/arm/mach-at91/built-in.o:(.arch.info.init+0xbc): undefined reference to `at91sam926x_timer' It looks like AT91 stuff is not looked after carefully. Can you please send me a working defconfig based on the one I sent you - just modify it. -- Best Regards, Artem Bityutskiy -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part URL: