From: dedekind1@gmail.com (Artem Bityutskiy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver
Date: Thu, 28 Jun 2012 18:40:21 +0300 [thread overview]
Message-ID: <1340898021.3070.123.camel@sauron.fi.intel.com> (raw)
In-Reply-To: <1340871698-477-1-git-send-email-josh.wu@atmel.com>
On Thu, 2012-06-28 at 16:21 +0800, Josh Wu wrote:
> Those patches is based on the l2-mtd.git three.
>
> Since there are two patches of v11 already pushed, so this version v12 only includes the left two patches.
> which includes the modification according to Richard Genoud's review suggestion.
>
> Changes since v11,
> add documentation for atmel nand reg parameter and one example for PMECC support.
> fix the bug: no error reported when fail to get resoures of PMECC ERRLOC or ROM.
> fix the bug: no correction when ecc data has bit flipped.
> add clearer debug information for data correction.
>
> Josh Wu (2):
> MTD: at91: add dt parameters for Atmel PMECC
> MTD: at91: atmel_nand: Update driver to support Programmable Multibit
> ECC controller
>
> .../devicetree/bindings/mtd/atmel-nand.txt | 40 +-
> drivers/mtd/nand/atmel_nand.c | 801 +++++++++++++++++++-
> drivers/mtd/nand/atmel_nand_ecc.h | 114 ++-
> 3 files changed, 951 insertions(+), 4 deletions(-)
Aiaiai is not 100% happy, could you take a look?
dedekind at blue:~/git/maintaining$ ../aiaiai/aiaiai-concat-mboxes ~/tmp/wu* | ./verify ../l2-mtd/ atmel_nand
Tested the patch(es) on top of the following commits:
9328bb5 Quick fixes - applied by aiaiai
ea3b6ef mtd: fix bogus inequation
0960e57 mtd: move mtd_read_oob() definition out of mtd.h
0560176 mtd: nand_bbt: refactor check_pattern_no_oob()
--------------------------------------------------------------------------------
Successfully built configuration "arm-at91cap9_defconfig,arm,arm-unknown-linux-gnueabi-", results:
--- before_patching.log
+++ after_patching.log
@@ @@
+drivers/mtd/nand/atmel_nand.c: In function 'pmecc_correct_data':
+drivers/mtd/nand/atmel_nand.c:680:38: warning: variable 'ecc_size' set but not used [-Wunused-but-set-variable]
+drivers/mtd/nand/atmel_nand.c:480:32: error: bad constant expression [sparse]
+drivers/mtd/nand/atmel_nand.c:488:35: error: bad constant expression [sparse]
+drivers/mtd/nand/atmel_nand.c:633:32: error: bad constant expression [sparse]
+drivers/mtd/nand/atmel_nand.c:635:35: error: bad constant expression [sparse]
--------------------------------------------------------------------------------
--
Best Regards,
Artem Bityutskiy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120628/7dc4e586/attachment.sig>
next prev parent reply other threads:[~2012-06-28 15:40 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-28 8:21 [PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver Josh Wu
2012-06-28 8:21 ` [PATCH v12 1/2] MTD: at91: add dt parameters for Atmel PMECC Josh Wu
2012-06-28 8:33 ` Josh Wu
2012-06-28 12:56 ` Nicolas Ferre
2012-06-28 8:21 ` [PATCH v12 2/2] MTD: at91: atmel_nand: Update driver to support Programmable Multibit ECC controller Josh Wu
2012-06-28 8:36 ` Nicolas Ferre
2012-06-28 8:33 ` [PATCH v12 0/2] MTD: at91: Add PMECC support for at91 nand flash driver Nicolas Ferre
2012-06-28 15:40 ` Artem Bityutskiy [this message]
2012-06-29 9:00 ` Josh Wu
2012-06-29 9:09 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340898021.3070.123.camel@sauron.fi.intel.com \
--to=dedekind1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).