[PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree

[PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree

[Richard Zhao]

The work is based on  ci13xxx rework done by Alexander Shishkin.

To let Greg pick up, I also added patches Alex queued that I depends on.

This patch series can also be found at:
https://github.com/riczhao/kernel-imx/commits/topics/usb-driver

Status:
  - this version only support host
  - usbotg controler works at host role

Changes since last version:
 - Rebase patch that Greg failed to merge.


Richard Zhao (9):
  USB: Chipidea: rename struct ci13xxx variables from udc to ci
  USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform
    drivers
  USB: Chipidea: add ci13xxx device id management
  usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of
    Kconfig
  usb: otg: add notify_connect/notify_disconnect callback
  USB: notify phy when root hub port connect change
  usb: chipidea: permit driver bindings pass phy pointer
  usb: otg: add basic mxs phy driver support
  usb: chipidea: add imx platform driver

 .../devicetree/bindings/usb/ci13xxx-imx.txt        |   18 +
 Documentation/devicetree/bindings/usb/mxs-phy.txt  |   13 +
 drivers/usb/chipidea/Kconfig                       |    1 +
 drivers/usb/chipidea/Makefile                      |    3 +
 drivers/usb/chipidea/ci.h                          |   28 +-
 drivers/usb/chipidea/ci13xxx_imx.c                 |  198 ++++++
 drivers/usb/chipidea/ci13xxx_msm.c                 |   46 +-
 drivers/usb/chipidea/ci13xxx_pci.c                 |   34 +-
 drivers/usb/chipidea/core.c                        |   58 ++
 drivers/usb/chipidea/debug.c                       |  146 ++---
 drivers/usb/chipidea/host.c                        |    1 +
 drivers/usb/chipidea/udc.c                         |  631 ++++++++++----------
 drivers/usb/core/hub.c                             |    8 +
 drivers/usb/otg/Kconfig                            |   10 +
 drivers/usb/otg/Makefile                           |    1 +
 drivers/usb/otg/mxs-phy.c                          |  186 ++++++
 include/linux/usb/chipidea.h                       |   12 +-
 include/linux/usb/otg.h                            |   21 +
 18 files changed, 953 insertions(+), 462 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
 create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
 create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c
 create mode 100644 drivers/usb/otg/mxs-phy.c

-- 
1.7.9.5

[PATCH v9 REBASE 1/9] USB: Chipidea: rename struct ci13xxx variables from udc to ci

[Richard Zhao]

struct ci13xxx represent the controller, which may be device or host,
so name its variables as ci.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
---
 drivers/usb/chipidea/ci.h          |   26 +-
 drivers/usb/chipidea/ci13xxx_msm.c |   12 +-
 drivers/usb/chipidea/debug.c       |  146 ++++-----
 drivers/usb/chipidea/udc.c         |  628 ++++++++++++++++++------------------
 include/linux/usb/chipidea.h       |    2 +-
 5 files changed, 407 insertions(+), 407 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 0b09330..9655e35 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -36,7 +36,7 @@
  * @name: string description of the endpoint
  * @qh: queue head for this endpoint
  * @wedge: is the endpoint wedged
- * @udc: pointer to the controller
+ * @ci: pointer to the controller
  * @lock: pointer to controller's spinlock
  * @td_pool: pointer to controller's TD pool
  */
@@ -54,7 +54,7 @@ struct ci13xxx_ep {
 	int					wedge;
 
 	/* global resources */
-	struct ci13xxx				*udc;
+	struct ci13xxx				*ci;
 	spinlock_t				*lock;
 	struct dma_pool				*td_pool;
 };
@@ -250,9 +250,9 @@ static inline int ffs_nr(u32 x)
  *
  * This function returns register contents
  */
-static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask)
+static inline u32 hw_read(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask)
 {
-	return ioread32(udc->hw_bank.regmap[reg]) & mask;
+	return ioread32(ci->hw_bank.regmap[reg]) & mask;
 }
 
 /**
@@ -261,14 +261,14 @@ static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask)
  * @mask: bitfield mask
  * @data: new value
  */
-static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline void hw_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
 			    u32 mask, u32 data)
 {
 	if (~mask)
-		data = (ioread32(udc->hw_bank.regmap[reg]) & ~mask)
+		data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
 			| (data & mask);
 
-	iowrite32(data, udc->hw_bank.regmap[reg]);
+	iowrite32(data, ci->hw_bank.regmap[reg]);
 }
 
 /**
@@ -278,12 +278,12 @@ static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
  *
  * This function returns register contents
  */
-static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline u32 hw_test_and_clear(struct ci13xxx *ci, enum ci13xxx_regs reg,
 				    u32 mask)
 {
-	u32 val = ioread32(udc->hw_bank.regmap[reg]) & mask;
+	u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
 
-	iowrite32(val, udc->hw_bank.regmap[reg]);
+	iowrite32(val, ci->hw_bank.regmap[reg]);
 	return val;
 }
 
@@ -295,12 +295,12 @@ static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg,
  *
  * This function returns register contents
  */
-static inline u32 hw_test_and_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline u32 hw_test_and_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
 				    u32 mask, u32 data)
 {
-	u32 val = hw_read(udc, reg, ~0);
+	u32 val = hw_read(ci, reg, ~0);
 
-	hw_write(udc, reg, mask, data);
+	hw_write(ci, reg, mask, data);
 	return (val & mask) >> ffs_nr(mask);
 }
 
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 12c0dd6..5a2fe5f 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -15,11 +15,11 @@
 
 #include "ci.h"
 
-#define MSM_USB_BASE	(udc->hw_bank.abs)
+#define MSM_USB_BASE	(ci->hw_bank.abs)
 
-static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
+static void ci13xxx_msm_notify_event(struct ci13xxx *ci, unsigned event)
 {
-	struct device *dev = udc->gadget.dev.parent;
+	struct device *dev = ci->gadget.dev.parent;
 	int val;
 
 	switch (event) {
@@ -34,13 +34,13 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
 		 * Put the transceiver in non-driving mode. Otherwise host
 		 * may not detect soft-disconnection.
 		 */
-		val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL);
+		val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
 		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
 		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-		usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
+		usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
 		break;
 	default:
-		dev_dbg(dev, "unknown ci13xxx_udc event\n");
+		dev_dbg(dev, "unknown ci13xxx event\n");
 		break;
 	}
 }
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index c4b3e15..c6f50a2 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -68,15 +68,15 @@ void dbg_interrupt(u32 intmask)
  *
  * This function returns number of registers read
  */
-static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size)
+static size_t hw_register_read(struct ci13xxx *ci, u32 *buf, size_t size)
 {
 	unsigned i;
 
-	if (size > udc->hw_bank.size)
-		size = udc->hw_bank.size;
+	if (size > ci->hw_bank.size)
+		size = ci->hw_bank.size;
 
 	for (i = 0; i < size; i++)
-		buf[i] = hw_read(udc, i * sizeof(u32), ~0);
+		buf[i] = hw_read(ci, i * sizeof(u32), ~0);
 
 	return size;
 }
@@ -88,18 +88,18 @@ static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size)
  *
  * This function returns an error code
  */
-static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data)
+static int hw_register_write(struct ci13xxx *ci, u16 addr, u32 data)
 {
 	/* align */
 	addr /= sizeof(u32);
 
-	if (addr >= udc->hw_bank.size)
+	if (addr >= ci->hw_bank.size)
 		return -EINVAL;
 
 	/* align */
 	addr *= sizeof(u32);
 
-	hw_write(udc, addr, ~0, data);
+	hw_write(ci, addr, ~0, data);
 	return 0;
 }
 
@@ -110,13 +110,13 @@ static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data)
  *
  * This function returns an error code
  */
-static int hw_intr_clear(struct ci13xxx *udc, int n)
+static int hw_intr_clear(struct ci13xxx *ci, int n)
 {
 	if (n >= REG_BITS)
 		return -EINVAL;
 
-	hw_write(udc, OP_USBINTR, BIT(n), 0);
-	hw_write(udc, OP_USBSTS,  BIT(n), BIT(n));
+	hw_write(ci, OP_USBINTR, BIT(n), 0);
+	hw_write(ci, OP_USBSTS,  BIT(n), BIT(n));
 	return 0;
 }
 
@@ -127,15 +127,15 @@ static int hw_intr_clear(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_intr_force(struct ci13xxx *udc, int n)
+static int hw_intr_force(struct ci13xxx *ci, int n)
 {
 	if (n >= REG_BITS)
 		return -EINVAL;
 
-	hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
-	hw_write(udc, OP_USBINTR,  BIT(n), BIT(n));
-	hw_write(udc, OP_USBSTS,   BIT(n), BIT(n));
-	hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, 0);
+	hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
+	hw_write(ci, OP_USBINTR,  BIT(n), BIT(n));
+	hw_write(ci, OP_USBSTS,   BIT(n), BIT(n));
+	hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, 0);
 	return 0;
 }
 
@@ -147,12 +147,12 @@ static int hw_intr_force(struct ci13xxx *udc, int n)
 static ssize_t show_device(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	struct usb_gadget *gadget = &udc->gadget;
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
+	struct usb_gadget *gadget = &ci->gadget;
 	int n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
@@ -188,8 +188,8 @@ static DEVICE_ATTR(device, S_IRUSR, show_device, NULL);
 static ssize_t show_driver(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	struct usb_gadget_driver *driver = udc->driver;
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
+	struct usb_gadget_driver *driver = ci->driver;
 	int n = 0;
 
 	if (attr == NULL || buf == NULL) {
@@ -412,22 +412,22 @@ static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events);
 static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	u32 intr;
 	unsigned i, j, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 
 	/*n += scnprintf(buf + n, PAGE_SIZE - n,
-		       "status = %08x\n", hw_read_intr_status(udc));
+		       "status = %08x\n", hw_read_intr_status(ci));
 	n += scnprintf(buf + n, PAGE_SIZE - n,
-	"enable = %08x\n", hw_read_intr_enable(udc));*/
+	"enable = %08x\n", hw_read_intr_enable(ci));*/
 
 	n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n",
 		       isr_statistics.test);
@@ -471,7 +471,7 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 			n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
 	}
 
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
@@ -485,31 +485,31 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 static ssize_t store_inters(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned en, bit;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "EINVAL\n");
+		dev_err(ci->dev, "EINVAL\n");
 		goto done;
 	}
 
 	if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) {
-		dev_err(udc->dev, "<1|0> <bit>: enable|disable interrupt\n");
+		dev_err(ci->dev, "<1|0> <bit>: enable|disable interrupt\n");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 	if (en) {
-		if (hw_intr_force(udc, bit))
+		if (hw_intr_force(ci, bit))
 			dev_err(dev, "invalid bit number\n");
 		else
 			isr_statistics.test++;
 	} else {
-		if (hw_intr_clear(udc, bit))
+		if (hw_intr_clear(ci, bit))
 			dev_err(dev, "invalid bit number\n");
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -524,18 +524,18 @@ static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters);
 static ssize_t show_port_test(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned mode;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "EINVAL\n");
+		dev_err(ci->dev, "EINVAL\n");
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	mode = hw_port_test_get(udc);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	mode = hw_port_test_get(ci);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode);
 }
@@ -549,24 +549,24 @@ static ssize_t store_port_test(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned mode;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		goto done;
 	}
 
 	if (sscanf(buf, "%u", &mode) != 1) {
-		dev_err(udc->dev, "<mode>: set port test mode");
+		dev_err(ci->dev, "<mode>: set port test mode");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (hw_port_test_set(udc, mode))
-		dev_err(udc->dev, "invalid mode\n");
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (hw_port_test_set(ci, mode))
+		dev_err(ci->dev, "invalid mode\n");
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -582,20 +582,20 @@ static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR,
 static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned i, j, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	for (i = 0; i < udc->hw_ep_max/2; i++) {
-		struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i];
+	spin_lock_irqsave(&ci->lock, flags);
+	for (i = 0; i < ci->hw_ep_max/2; i++) {
+		struct ci13xxx_ep *mEpRx = &ci->ci13xxx_ep[i];
 		struct ci13xxx_ep *mEpTx =
-			&udc->ci13xxx_ep[i + udc->hw_ep_max/2];
+			&ci->ci13xxx_ep[i + ci->hw_ep_max/2];
 		n += scnprintf(buf + n, PAGE_SIZE - n,
 			       "EP=%02i: RX=%08X TX=%08X\n",
 			       i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
@@ -606,7 +606,7 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
 				       *((u32 *)mEpTx->qh.ptr + j));
 		}
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
@@ -621,25 +621,25 @@ static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL);
 static ssize_t show_registers(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	u32 *dump;
 	unsigned i, k, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
 	dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL);
 	if (!dump) {
-		dev_err(udc->dev, "%s: out of memory\n", __func__);
+		dev_err(ci->dev, "%s: out of memory\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	k = hw_register_read(udc, dump, DUMP_ENTRIES);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	k = hw_register_read(ci, dump, DUMP_ENTRIES);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	for (i = 0; i < k; i++) {
 		n += scnprintf(buf + n, PAGE_SIZE - n,
@@ -660,24 +660,24 @@ static ssize_t store_registers(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long addr, data, flags;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		goto done;
 	}
 
 	if (sscanf(buf, "%li %li", &addr, &data) != 2) {
-		dev_err(udc->dev,
+		dev_err(ci->dev,
 			"<addr> <data>: write data to register address\n");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (hw_register_write(udc, addr, data))
-		dev_err(udc->dev, "invalid address range\n");
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (hw_register_write(ci, addr, data))
+		dev_err(ci->dev, "invalid address range\n");
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -693,34 +693,34 @@ static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR,
 static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	struct list_head   *ptr = NULL;
 	struct ci13xxx_req *req = NULL;
 	unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	for (i = 0; i < udc->hw_ep_max; i++)
-		list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue)
+	spin_lock_irqsave(&ci->lock, flags);
+	for (i = 0; i < ci->hw_ep_max; i++)
+		list_for_each(ptr, &ci->ci13xxx_ep[i].qh.queue)
 		{
 			req = list_entry(ptr, struct ci13xxx_req, queue);
 
 			n += scnprintf(buf + n, PAGE_SIZE - n,
 					"EP=%02i: TD=%08X %s\n",
-					i % udc->hw_ep_max/2, (u32)req->dma,
-					((i < udc->hw_ep_max/2) ? "RX" : "TX"));
+					i % ci->hw_ep_max/2, (u32)req->dma,
+					((i < ci->hw_ep_max/2) ? "RX" : "TX"));
 
 			for (j = 0; j < qSize; j++)
 				n += scnprintf(buf + n, PAGE_SIZE - n,
 						" %04X:    %08X\n", j,
 						*((u32 *)req->ptr + j));
 		}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 3094c85..ba8284e 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -67,11 +67,11 @@ static inline int hw_ep_bit(int num, int dir)
 	return num + (dir ? 16 : 0);
 }
 
-static inline int ep_to_bit(struct ci13xxx *udc, int n)
+static inline int ep_to_bit(struct ci13xxx *ci, int n)
 {
-	int fill = 16 - udc->hw_ep_max / 2;
+	int fill = 16 - ci->hw_ep_max / 2;
 
-	if (n >= udc->hw_ep_max / 2)
+	if (n >= ci->hw_ep_max / 2)
 		n += fill;
 
 	return n;
@@ -84,17 +84,17 @@ static inline int ep_to_bit(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_device_state(struct ci13xxx *udc, u32 dma)
+static int hw_device_state(struct ci13xxx *ci, u32 dma)
 {
 	if (dma) {
-		hw_write(udc, OP_ENDPTLISTADDR, ~0, dma);
+		hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
 		/* interrupt, error, port change, reset, sleep/suspend */
-		hw_write(udc, OP_USBINTR, ~0,
+		hw_write(ci, OP_USBINTR, ~0,
 			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
-		hw_write(udc, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	} else {
-		hw_write(udc, OP_USBCMD, USBCMD_RS, 0);
-		hw_write(udc, OP_USBINTR, ~0, 0);
+		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+		hw_write(ci, OP_USBINTR, ~0, 0);
 	}
 	return 0;
 }
@@ -106,16 +106,16 @@ static int hw_device_state(struct ci13xxx *udc, u32 dma)
  *
  * This function returns an error code
  */
-static int hw_ep_flush(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_flush(struct ci13xxx *ci, int num, int dir)
 {
 	int n = hw_ep_bit(num, dir);
 
 	do {
 		/* flush any pending transfer */
-		hw_write(udc, OP_ENDPTFLUSH, BIT(n), BIT(n));
-		while (hw_read(udc, OP_ENDPTFLUSH, BIT(n)))
+		hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n));
+		while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
 			cpu_relax();
-	} while (hw_read(udc, OP_ENDPTSTAT, BIT(n)));
+	} while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
 
 	return 0;
 }
@@ -127,10 +127,10 @@ static int hw_ep_flush(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns an error code
  */
-static int hw_ep_disable(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_disable(struct ci13xxx *ci, int num, int dir)
 {
-	hw_ep_flush(udc, num, dir);
-	hw_write(udc, OP_ENDPTCTRL + num,
+	hw_ep_flush(ci, num, dir);
+	hw_write(ci, OP_ENDPTCTRL + num,
 		 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
 	return 0;
 }
@@ -143,7 +143,7 @@ static int hw_ep_disable(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns an error code
  */
-static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
+static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type)
 {
 	u32 mask, data;
 
@@ -166,7 +166,7 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
 		mask |= ENDPTCTRL_RXE;  /* enable  */
 		data |= ENDPTCTRL_RXE;
 	}
-	hw_write(udc, OP_ENDPTCTRL + num, mask, data);
+	hw_write(ci, OP_ENDPTCTRL + num, mask, data);
 	return 0;
 }
 
@@ -177,11 +177,11 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
  *
  * This function returns 1 if endpoint halted
  */
-static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir)
 {
 	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
 
-	return hw_read(udc, OP_ENDPTCTRL + num, mask) ? 1 : 0;
+	return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
 }
 
 /**
@@ -191,10 +191,10 @@ static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns setup status
  */
-static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n)
+static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n)
 {
-	n = ep_to_bit(udc, n);
-	return hw_test_and_clear(udc, OP_ENDPTSETUPSTAT, BIT(n));
+	n = ep_to_bit(ci, n);
+	return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n));
 }
 
 /**
@@ -205,18 +205,18 @@ static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl)
+static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl)
 {
 	int n = hw_ep_bit(num, dir);
 
-	if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num)))
+	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
-	hw_write(udc, OP_ENDPTPRIME, BIT(n), BIT(n));
+	hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n));
 
-	while (hw_read(udc, OP_ENDPTPRIME, BIT(n)))
+	while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 		cpu_relax();
-	if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num)))
+	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
 	/* status shoult be tested according with manual but it doesn't work */
@@ -232,7 +232,7 @@ static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl)
  *
  * This function returns an error code
  */
-static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
+static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value)
 {
 	if (value != 0 && value != 1)
 		return -EINVAL;
@@ -243,9 +243,9 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
 		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
 
 		/* data toggle - reserved for EP0 but it's in ESS */
-		hw_write(udc, reg, mask_xs|mask_xr,
+		hw_write(ci, reg, mask_xs|mask_xr,
 			  value ? mask_xs : mask_xr);
-	} while (value != hw_ep_get_halt(udc, num, dir));
+	} while (value != hw_ep_get_halt(ci, num, dir));
 
 	return 0;
 }
@@ -255,10 +255,10 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
  *
  * This function returns true if high speed port
  */
-static int hw_port_is_high_speed(struct ci13xxx *udc)
+static int hw_port_is_high_speed(struct ci13xxx *ci)
 {
-	return udc->hw_bank.lpm ? hw_read(udc, OP_DEVLC, DEVLC_PSPD) :
-		hw_read(udc, OP_PORTSC, PORTSC_HSP);
+	return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
+		hw_read(ci, OP_PORTSC, PORTSC_HSP);
 }
 
 /**
@@ -266,9 +266,9 @@ static int hw_port_is_high_speed(struct ci13xxx *udc)
  *
  * This function returns register data
  */
-static u32 hw_read_intr_enable(struct ci13xxx *udc)
+static u32 hw_read_intr_enable(struct ci13xxx *ci)
 {
-	return hw_read(udc, OP_USBINTR, ~0);
+	return hw_read(ci, OP_USBINTR, ~0);
 }
 
 /**
@@ -276,9 +276,9 @@ static u32 hw_read_intr_enable(struct ci13xxx *udc)
  *
  * This function returns register data
  */
-static u32 hw_read_intr_status(struct ci13xxx *udc)
+static u32 hw_read_intr_status(struct ci13xxx *ci)
 {
-	return hw_read(udc, OP_USBSTS, ~0);
+	return hw_read(ci, OP_USBSTS, ~0);
 }
 
 /**
@@ -288,10 +288,10 @@ static u32 hw_read_intr_status(struct ci13xxx *udc)
  *
  * This function returns complete status
  */
-static int hw_test_and_clear_complete(struct ci13xxx *udc, int n)
+static int hw_test_and_clear_complete(struct ci13xxx *ci, int n)
 {
-	n = ep_to_bit(udc, n);
-	return hw_test_and_clear(udc, OP_ENDPTCOMPLETE, BIT(n));
+	n = ep_to_bit(ci, n);
+	return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
 }
 
 /**
@@ -300,11 +300,11 @@ static int hw_test_and_clear_complete(struct ci13xxx *udc, int n)
  *
  * This function returns active interrutps
  */
-static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc)
+static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci)
 {
-	u32 reg = hw_read_intr_status(udc) & hw_read_intr_enable(udc);
+	u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
 
-	hw_write(udc, OP_USBSTS, ~0, reg);
+	hw_write(ci, OP_USBSTS, ~0, reg);
 	return reg;
 }
 
@@ -314,9 +314,9 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc)
  *
  * This function returns guard value
  */
-static int hw_test_and_clear_setup_guard(struct ci13xxx *udc)
+static int hw_test_and_clear_setup_guard(struct ci13xxx *ci)
 {
-	return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, 0);
+	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
 }
 
 /**
@@ -325,9 +325,9 @@ static int hw_test_and_clear_setup_guard(struct ci13xxx *udc)
  *
  * This function returns guard value
  */
-static int hw_test_and_set_setup_guard(struct ci13xxx *udc)
+static int hw_test_and_set_setup_guard(struct ci13xxx *ci)
 {
-	return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
+	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
 }
 
 /**
@@ -337,9 +337,9 @@ static int hw_test_and_set_setup_guard(struct ci13xxx *udc)
  * This function explicitly sets the address, without the "USBADRA" (advance)
  * feature, which is not supported by older versions of the controller.
  */
-static void hw_usb_set_address(struct ci13xxx *udc, u8 value)
+static void hw_usb_set_address(struct ci13xxx *ci, u8 value)
 {
-	hw_write(udc, OP_DEVICEADDR, DEVICEADDR_USBADR,
+	hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
 		 value << ffs_nr(DEVICEADDR_USBADR));
 }
 
@@ -349,21 +349,21 @@ static void hw_usb_set_address(struct ci13xxx *udc, u8 value)
  *
  * This function returns an error code
  */
-static int hw_usb_reset(struct ci13xxx *udc)
+static int hw_usb_reset(struct ci13xxx *ci)
 {
-	hw_usb_set_address(udc, 0);
+	hw_usb_set_address(ci, 0);
 
 	/* ESS flushes only@end?!? */
-	hw_write(udc, OP_ENDPTFLUSH,    ~0, ~0);
+	hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0);
 
 	/* clear setup token semaphores */
-	hw_write(udc, OP_ENDPTSETUPSTAT, 0,  0);
+	hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0);
 
 	/* clear complete status */
-	hw_write(udc, OP_ENDPTCOMPLETE,  0,  0);
+	hw_write(ci, OP_ENDPTCOMPLETE,  0,  0);
 
 	/* wait until all bits cleared */
-	while (hw_read(udc, OP_ENDPTPRIME, ~0))
+	while (hw_read(ci, OP_ENDPTPRIME, ~0))
 		udelay(10);             /* not RTOS friendly */
 
 	/* reset all endpoints ? */
@@ -395,7 +395,7 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep)
  */
 static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 {
-	struct ci13xxx *udc = mEp->udc;
+	struct ci13xxx *ci = mEp->ci;
 	unsigned i;
 	int ret = 0;
 	unsigned length = mReq->req.length;
@@ -418,7 +418,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 		if (!mReq->req.no_interrupt)
 			mReq->zptr->token   |= TD_IOC;
 	}
-	ret = usb_gadget_map_request(&udc->gadget, &mReq->req, mEp->dir);
+	ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir);
 	if (ret)
 		return ret;
 
@@ -454,13 +454,13 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 		else
 			mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK;
 		wmb();
-		if (hw_read(udc, OP_ENDPTPRIME, BIT(n)))
+		if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 			goto done;
 		do {
-			hw_write(udc, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
-			tmp_stat = hw_read(udc, OP_ENDPTSTAT, BIT(n));
-		} while (!hw_read(udc, OP_USBCMD, USBCMD_ATDTW));
-		hw_write(udc, OP_USBCMD, USBCMD_ATDTW, 0);
+			hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
+			tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
+		} while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
+		hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
 		if (tmp_stat)
 			goto done;
 	}
@@ -472,7 +472,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 
 	wmb();   /* synchronize before ep prime */
 
-	ret = hw_ep_prime(udc, mEp->num, mEp->dir,
+	ret = hw_ep_prime(ci, mEp->num, mEp->dir,
 			   mEp->type == USB_ENDPOINT_XFER_CONTROL);
 done:
 	return ret;
@@ -502,7 +502,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 
 	mReq->req.status = 0;
 
-	usb_gadget_unmap_request(&mEp->udc->gadget, &mReq->req, mEp->dir);
+	usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir);
 
 	mReq->req.status = mReq->ptr->token & TD_STATUS;
 	if ((TD_STATUS_HALTED & mReq->req.status) != 0)
@@ -534,7 +534,7 @@ __acquires(mEp->lock)
 	if (mEp == NULL)
 		return -EINVAL;
 
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	while (!list_empty(&mEp->qh.queue)) {
 
@@ -563,33 +563,33 @@ __acquires(mEp->lock)
 static int _gadget_stop_activity(struct usb_gadget *gadget)
 {
 	struct usb_ep *ep;
-	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx    *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	udc->remote_wakeup = 0;
-	udc->suspended = 0;
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->gadget.speed = USB_SPEED_UNKNOWN;
+	ci->remote_wakeup = 0;
+	ci->suspended = 0;
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	/* flush all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
 	}
-	usb_ep_fifo_flush(&udc->ep0out->ep);
-	usb_ep_fifo_flush(&udc->ep0in->ep);
+	usb_ep_fifo_flush(&ci->ep0out->ep);
+	usb_ep_fifo_flush(&ci->ep0in->ep);
 
-	if (udc->driver)
-		udc->driver->disconnect(gadget);
+	if (ci->driver)
+		ci->driver->disconnect(gadget);
 
 	/* make sure to disable all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_disable(ep);
 	}
 
-	if (udc->status != NULL) {
-		usb_ep_free_request(&udc->ep0in->ep, udc->status);
-		udc->status = NULL;
+	if (ci->status != NULL) {
+		usb_ep_free_request(&ci->ep0in->ep, ci->status);
+		ci->status = NULL;
 	}
 
 	return 0;
@@ -600,36 +600,36 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
  *****************************************************************************/
 /**
  * isr_reset_handler: USB reset interrupt handler
- * @udc: UDC device
+ * @ci: UDC device
  *
  * This function resets USB engine after a bus reset occurred
  */
-static void isr_reset_handler(struct ci13xxx *udc)
-__releases(udc->lock)
-__acquires(udc->lock)
+static void isr_reset_handler(struct ci13xxx *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
 {
 	int retval;
 
 	dbg_event(0xFF, "BUS RST", 0);
 
-	spin_unlock(&udc->lock);
-	retval = _gadget_stop_activity(&udc->gadget);
+	spin_unlock(&ci->lock);
+	retval = _gadget_stop_activity(&ci->gadget);
 	if (retval)
 		goto done;
 
-	retval = hw_usb_reset(udc);
+	retval = hw_usb_reset(ci);
 	if (retval)
 		goto done;
 
-	udc->status = usb_ep_alloc_request(&udc->ep0in->ep, GFP_ATOMIC);
-	if (udc->status == NULL)
+	ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
+	if (ci->status == NULL)
 		retval = -ENOMEM;
 
 done:
-	spin_lock(&udc->lock);
+	spin_lock(&ci->lock);
 
 	if (retval)
-		dev_err(udc->dev, "error: %i\n", retval);
+		dev_err(ci->dev, "error: %i\n", retval);
 }
 
 /**
@@ -650,17 +650,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
 
 /**
  * isr_get_status_response: get_status request response
- * @udc: udc struct
+ * @ci: ci struct
  * @setup: setup request packet
  *
  * This function returns an error code
  */
-static int isr_get_status_response(struct ci13xxx *udc,
+static int isr_get_status_response(struct ci13xxx *ci,
 				   struct usb_ctrlrequest *setup)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
-	struct ci13xxx_ep *mEp = udc->ep0in;
+	struct ci13xxx_ep *mEp = ci->ep0in;
 	struct usb_request *req = NULL;
 	gfp_t gfp_flags = GFP_ATOMIC;
 	int dir, num, retval;
@@ -684,14 +684,14 @@ __acquires(mEp->lock)
 
 	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
 		/* Assume that device is bus powered for now. */
-		*(u16 *)req->buf = udc->remote_wakeup << 1;
+		*(u16 *)req->buf = ci->remote_wakeup << 1;
 		retval = 0;
 	} else if ((setup->bRequestType & USB_RECIP_MASK) \
 		   == USB_RECIP_ENDPOINT) {
 		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
 			TX : RX;
 		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
-		*(u16 *)req->buf = hw_ep_get_halt(udc, num, dir);
+		*(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
 	}
 	/* else do nothing; reserved for future use */
 
@@ -723,39 +723,39 @@ __acquires(mEp->lock)
 static void
 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct ci13xxx *udc = req->context;
+	struct ci13xxx *ci = req->context;
 	unsigned long flags;
 
-	if (udc->setaddr) {
-		hw_usb_set_address(udc, udc->address);
-		udc->setaddr = false;
+	if (ci->setaddr) {
+		hw_usb_set_address(ci, ci->address);
+		ci->setaddr = false;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (udc->test_mode)
-		hw_port_test_set(udc, udc->test_mode);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (ci->test_mode)
+		hw_port_test_set(ci, ci->test_mode);
+	spin_unlock_irqrestore(&ci->lock, flags);
 }
 
 /**
  * isr_setup_status_phase: queues the status phase of a setup transation
- * @udc: udc struct
+ * @ci: ci struct
  *
  * This function returns an error code
  */
-static int isr_setup_status_phase(struct ci13xxx *udc)
+static int isr_setup_status_phase(struct ci13xxx *ci)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
 	int retval;
 	struct ci13xxx_ep *mEp;
 
-	mEp = (udc->ep0_dir == TX) ? udc->ep0out : udc->ep0in;
-	udc->status->context = udc;
-	udc->status->complete = isr_setup_status_complete;
+	mEp = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
+	ci->status->context = ci;
+	ci->status->complete = isr_setup_status_complete;
 
 	spin_unlock(mEp->lock);
-	retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
+	retval = usb_ep_queue(&mEp->ep, ci->status, GFP_ATOMIC);
 	spin_lock(mEp->lock);
 
 	return retval;
@@ -790,7 +790,7 @@ __acquires(mEp->lock)
 			spin_unlock(mEp->lock);
 			if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) &&
 					mReq->req.length)
-				mEpTemp = mEp->udc->ep0in;
+				mEpTemp = mEp->ci->ep0in;
 			mReq->req.complete(&mEpTemp->ep, &mReq->req);
 			spin_lock(mEp->lock);
 		}
@@ -806,48 +806,48 @@ __acquires(mEp->lock)
 
 /**
  * isr_tr_complete_handler: transaction complete interrupt handler
- * @udc: UDC descriptor
+ * @ci: UDC descriptor
  *
  * This function handles traffic events
  */
-static void isr_tr_complete_handler(struct ci13xxx *udc)
-__releases(udc->lock)
-__acquires(udc->lock)
+static void isr_tr_complete_handler(struct ci13xxx *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
 {
 	unsigned i;
 	u8 tmode = 0;
 
-	for (i = 0; i < udc->hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp  = &udc->ci13xxx_ep[i];
+	for (i = 0; i < ci->hw_ep_max; i++) {
+		struct ci13xxx_ep *mEp  = &ci->ci13xxx_ep[i];
 		int type, num, dir, err = -EINVAL;
 		struct usb_ctrlrequest req;
 
 		if (mEp->ep.desc == NULL)
 			continue;   /* not configured */
 
-		if (hw_test_and_clear_complete(udc, i)) {
+		if (hw_test_and_clear_complete(ci, i)) {
 			err = isr_tr_complete_low(mEp);
 			if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
 				if (err > 0)   /* needs status phase */
-					err = isr_setup_status_phase(udc);
+					err = isr_setup_status_phase(ci);
 				if (err < 0) {
 					dbg_event(_usb_addr(mEp),
 						  "ERROR", err);
-					spin_unlock(&udc->lock);
+					spin_unlock(&ci->lock);
 					if (usb_ep_set_halt(&mEp->ep))
-						dev_err(udc->dev,
+						dev_err(ci->dev,
 							"error: ep_set_halt\n");
-					spin_lock(&udc->lock);
+					spin_lock(&ci->lock);
 				}
 			}
 		}
 
 		if (mEp->type != USB_ENDPOINT_XFER_CONTROL ||
-		    !hw_test_and_clear_setup_status(udc, i))
+		    !hw_test_and_clear_setup_status(ci, i))
 			continue;
 
 		if (i != 0) {
-			dev_warn(udc->dev, "ctrl traffic at endpoint %d\n", i);
+			dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i);
 			continue;
 		}
 
@@ -855,18 +855,18 @@ __acquires(udc->lock)
 		 * Flush data and handshake transactions of previous
 		 * setup packet.
 		 */
-		_ep_nuke(udc->ep0out);
-		_ep_nuke(udc->ep0in);
+		_ep_nuke(ci->ep0out);
+		_ep_nuke(ci->ep0in);
 
 		/* read_setup_packet */
 		do {
-			hw_test_and_set_setup_guard(udc);
+			hw_test_and_set_setup_guard(ci);
 			memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
-		} while (!hw_test_and_clear_setup_guard(udc));
+		} while (!hw_test_and_clear_setup_guard(ci));
 
 		type = req.bRequestType;
 
-		udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
+		ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
 
 		dbg_setup(_usb_addr(mEp), &req);
 
@@ -881,23 +881,23 @@ __acquires(udc->lock)
 				dir = num & USB_ENDPOINT_DIR_MASK;
 				num &= USB_ENDPOINT_NUMBER_MASK;
 				if (dir) /* TX */
-					num += udc->hw_ep_max/2;
-				if (!udc->ci13xxx_ep[num].wedge) {
-					spin_unlock(&udc->lock);
+					num += ci->hw_ep_max/2;
+				if (!ci->ci13xxx_ep[num].wedge) {
+					spin_unlock(&ci->lock);
 					err = usb_ep_clear_halt(
-						&udc->ci13xxx_ep[num].ep);
-					spin_lock(&udc->lock);
+						&ci->ci13xxx_ep[num].ep);
+					spin_lock(&ci->lock);
 					if (err)
 						break;
 				}
-				err = isr_setup_status_phase(udc);
+				err = isr_setup_status_phase(ci);
 			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
 					le16_to_cpu(req.wValue) ==
 					USB_DEVICE_REMOTE_WAKEUP) {
 				if (req.wLength != 0)
 					break;
-				udc->remote_wakeup = 0;
-				err = isr_setup_status_phase(udc);
+				ci->remote_wakeup = 0;
+				err = isr_setup_status_phase(ci);
 			} else {
 				goto delegate;
 			}
@@ -910,7 +910,7 @@ __acquires(udc->lock)
 			if (le16_to_cpu(req.wLength) != 2 ||
 			    le16_to_cpu(req.wValue)  != 0)
 				break;
-			err = isr_get_status_response(udc, &req);
+			err = isr_get_status_response(ci, &req);
 			break;
 		case USB_REQ_SET_ADDRESS:
 			if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
@@ -918,9 +918,9 @@ __acquires(udc->lock)
 			if (le16_to_cpu(req.wLength) != 0 ||
 			    le16_to_cpu(req.wIndex)  != 0)
 				break;
-			udc->address = (u8)le16_to_cpu(req.wValue);
-			udc->setaddr = true;
-			err = isr_setup_status_phase(udc);
+			ci->address = (u8)le16_to_cpu(req.wValue);
+			ci->setaddr = true;
+			err = isr_setup_status_phase(ci);
 			break;
 		case USB_REQ_SET_FEATURE:
 			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
@@ -932,20 +932,20 @@ __acquires(udc->lock)
 				dir = num & USB_ENDPOINT_DIR_MASK;
 				num &= USB_ENDPOINT_NUMBER_MASK;
 				if (dir) /* TX */
-					num += udc->hw_ep_max/2;
+					num += ci->hw_ep_max/2;
 
-				spin_unlock(&udc->lock);
-				err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep);
-				spin_lock(&udc->lock);
+				spin_unlock(&ci->lock);
+				err = usb_ep_set_halt(&ci->ci13xxx_ep[num].ep);
+				spin_lock(&ci->lock);
 				if (!err)
-					isr_setup_status_phase(udc);
+					isr_setup_status_phase(ci);
 			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
 				if (req.wLength != 0)
 					break;
 				switch (le16_to_cpu(req.wValue)) {
 				case USB_DEVICE_REMOTE_WAKEUP:
-					udc->remote_wakeup = 1;
-					err = isr_setup_status_phase(udc);
+					ci->remote_wakeup = 1;
+					err = isr_setup_status_phase(ci);
 					break;
 				case USB_DEVICE_TEST_MODE:
 					tmode = le16_to_cpu(req.wIndex) >> 8;
@@ -955,9 +955,9 @@ __acquires(udc->lock)
 					case TEST_SE0_NAK:
 					case TEST_PACKET:
 					case TEST_FORCE_EN:
-						udc->test_mode = tmode;
+						ci->test_mode = tmode;
 						err = isr_setup_status_phase(
-								udc);
+								ci);
 						break;
 					default:
 						break;
@@ -972,21 +972,21 @@ __acquires(udc->lock)
 		default:
 delegate:
 			if (req.wLength == 0)   /* no data phase */
-				udc->ep0_dir = TX;
+				ci->ep0_dir = TX;
 
-			spin_unlock(&udc->lock);
-			err = udc->driver->setup(&udc->gadget, &req);
-			spin_lock(&udc->lock);
+			spin_unlock(&ci->lock);
+			err = ci->driver->setup(&ci->gadget, &req);
+			spin_lock(&ci->lock);
 			break;
 		}
 
 		if (err < 0) {
 			dbg_event(_usb_addr(mEp), "ERROR", err);
 
-			spin_unlock(&udc->lock);
+			spin_unlock(&ci->lock);
 			if (usb_ep_set_halt(&mEp->ep))
-				dev_err(udc->dev, "error: ep_set_halt\n");
-			spin_lock(&udc->lock);
+				dev_err(ci->dev, "error: ep_set_halt\n");
+			spin_lock(&ci->lock);
 		}
 	}
 }
@@ -1016,7 +1016,7 @@ static int ep_enable(struct usb_ep *ep,
 	mEp->ep.desc = desc;
 
 	if (!list_empty(&mEp->qh.queue))
-		dev_warn(mEp->udc->dev, "enabling a non-empty endpoint!\n");
+		dev_warn(mEp->ci->dev, "enabling a non-empty endpoint!\n");
 
 	mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
 	mEp->num  = usb_endpoint_num(desc);
@@ -1044,7 +1044,7 @@ static int ep_enable(struct usb_ep *ep,
 	 * is always enabled
 	 */
 	if (mEp->num)
-		retval |= hw_ep_enable(mEp->udc, mEp->num, mEp->dir, mEp->type);
+		retval |= hw_ep_enable(mEp->ci, mEp->num, mEp->dir, mEp->type);
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 	return retval;
@@ -1075,7 +1075,7 @@ static int ep_disable(struct usb_ep *ep)
 		dbg_event(_usb_addr(mEp), "DISABLE", 0);
 
 		retval |= _ep_nuke(mEp);
-		retval |= hw_ep_disable(mEp->udc, mEp->num, mEp->dir);
+		retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir);
 
 		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
 			mEp->dir = (mEp->dir == TX) ? RX : TX;
@@ -1132,7 +1132,7 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
 	if (ep == NULL || req == NULL) {
 		return;
 	} else if (!list_empty(&mReq->queue)) {
-		dev_err(mEp->udc->dev, "freeing queued request\n");
+		dev_err(mEp->ci->dev, "freeing queued request\n");
 		return;
 	}
 
@@ -1157,7 +1157,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 {
 	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
 	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
-	struct ci13xxx *udc = mEp->udc;
+	struct ci13xxx *ci = mEp->ci;
 	int retval = 0;
 	unsigned long flags;
 
@@ -1168,12 +1168,12 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 
 	if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
 		if (req->length)
-			mEp = (udc->ep0_dir == RX) ?
-			       udc->ep0out : udc->ep0in;
+			mEp = (ci->ep0_dir == RX) ?
+			       ci->ep0out : ci->ep0in;
 		if (!list_empty(&mEp->qh.queue)) {
 			_ep_nuke(mEp);
 			retval = -EOVERFLOW;
-			dev_warn(mEp->udc->dev, "endpoint ctrl %X nuked\n",
+			dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n",
 				 _usb_addr(mEp));
 		}
 	}
@@ -1181,14 +1181,14 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 	/* first nuke then test link, e.g. previous status has not sent */
 	if (!list_empty(&mReq->queue)) {
 		retval = -EBUSY;
-		dev_err(mEp->udc->dev, "request already in queue\n");
+		dev_err(mEp->ci->dev, "request already in queue\n");
 		goto done;
 	}
 
 	if (req->length > 4 * CI13XXX_PAGE_SIZE) {
 		req->length = 4 * CI13XXX_PAGE_SIZE;
 		retval = -EMSGSIZE;
-		dev_warn(mEp->udc->dev, "request length truncated\n");
+		dev_warn(mEp->ci->dev, "request length truncated\n");
 	}
 
 	dbg_queue(_usb_addr(mEp), req, retval);
@@ -1231,12 +1231,12 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 
 	dbg_event(_usb_addr(mEp), "DEQUEUE", 0);
 
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	/* pop request */
 	list_del_init(&mReq->queue);
 
-	usb_gadget_unmap_request(&mEp->udc->gadget, req, mEp->dir);
+	usb_gadget_unmap_request(&mEp->ci->gadget, req, mEp->dir);
 
 	req->status = -ECONNRESET;
 
@@ -1278,7 +1278,7 @@ static int ep_set_halt(struct usb_ep *ep, int value)
 	direction = mEp->dir;
 	do {
 		dbg_event(_usb_addr(mEp), "HALT", value);
-		retval |= hw_ep_set_halt(mEp->udc, mEp->num, mEp->dir, value);
+		retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value);
 
 		if (!value)
 			mEp->wedge = 0;
@@ -1326,14 +1326,14 @@ static void ep_fifo_flush(struct usb_ep *ep)
 	unsigned long flags;
 
 	if (ep == NULL) {
-		dev_err(mEp->udc->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
+		dev_err(mEp->ci->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
 		return;
 	}
 
 	spin_lock_irqsave(mEp->lock, flags);
 
 	dbg_event(_usb_addr(mEp), "FFLUSH", 0);
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 }
@@ -1359,30 +1359,30 @@ static const struct usb_ep_ops usb_ep_ops = {
  *****************************************************************************/
 static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int gadget_ready = 0;
 
-	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
+	if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
 		return -EOPNOTSUPP;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->vbus_active = is_active;
-	if (udc->driver)
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->vbus_active = is_active;
+	if (ci->driver)
 		gadget_ready = 1;
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	if (gadget_ready) {
 		if (is_active) {
 			pm_runtime_get_sync(&_gadget->dev);
-			hw_device_reset(udc, USBMODE_CM_DC);
-			hw_device_state(udc, udc->ep0out->qh.dma);
+			hw_device_reset(ci, USBMODE_CM_DC);
+			hw_device_state(ci, ci->ep0out->qh.dma);
 		} else {
-			hw_device_state(udc, 0);
-			if (udc->platdata->notify_event)
-				udc->platdata->notify_event(udc,
+			hw_device_state(ci, 0);
+			if (ci->platdata->notify_event)
+				ci->platdata->notify_event(ci,
 				CI13XXX_CONTROLLER_STOPPED_EVENT);
-			_gadget_stop_activity(&udc->gadget);
+			_gadget_stop_activity(&ci->gadget);
 			pm_runtime_put_sync(&_gadget->dev);
 		}
 	}
@@ -1392,31 +1392,31 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 
 static int ci13xxx_wakeup(struct usb_gadget *_gadget)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int ret = 0;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (!udc->remote_wakeup) {
+	spin_lock_irqsave(&ci->lock, flags);
+	if (!ci->remote_wakeup) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
-	if (!hw_read(udc, OP_PORTSC, PORTSC_SUSP)) {
+	if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
 		ret = -EINVAL;
 		goto out;
 	}
-	hw_write(udc, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
+	hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
 out:
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 	return ret;
 }
 
 static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 
-	if (udc->transceiver)
-		return usb_phy_set_power(udc->transceiver, mA);
+	if (ci->transceiver)
+		return usb_phy_set_power(ci->transceiver, mA);
 	return -ENOTSUPP;
 }
 
@@ -1437,28 +1437,28 @@ static const struct usb_gadget_ops usb_gadget_ops = {
 	.udc_stop	= ci13xxx_stop,
 };
 
-static int init_eps(struct ci13xxx *udc)
+static int init_eps(struct ci13xxx *ci)
 {
 	int retval = 0, i, j;
 
-	for (i = 0; i < udc->hw_ep_max/2; i++)
+	for (i = 0; i < ci->hw_ep_max/2; i++)
 		for (j = RX; j <= TX; j++) {
-			int k = i + j * udc->hw_ep_max/2;
-			struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k];
+			int k = i + j * ci->hw_ep_max/2;
+			struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[k];
 
 			scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
 					(j == TX)  ? "in" : "out");
 
-			mEp->udc          = udc;
-			mEp->lock         = &udc->lock;
-			mEp->td_pool      = udc->td_pool;
+			mEp->ci          = ci;
+			mEp->lock         = &ci->lock;
+			mEp->td_pool      = ci->td_pool;
 
 			mEp->ep.name      = mEp->name;
 			mEp->ep.ops       = &usb_ep_ops;
 			mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
 
 			INIT_LIST_HEAD(&mEp->qh.queue);
-			mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL,
+			mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
 						     &mEp->qh.dma);
 			if (mEp->qh.ptr == NULL)
 				retval = -ENOMEM;
@@ -1471,14 +1471,14 @@ static int init_eps(struct ci13xxx *udc)
 			 */
 			if (i == 0) {
 				if (j == RX)
-					udc->ep0out = mEp;
+					ci->ep0out = mEp;
 				else
-					udc->ep0in = mEp;
+					ci->ep0in = mEp;
 
 				continue;
 			}
 
-			list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list);
+			list_add_tail(&mEp->ep.ep_list, &ci->gadget.ep_list);
 		}
 
 	return retval;
@@ -1494,7 +1494,7 @@ static int init_eps(struct ci13xxx *udc)
 static int ci13xxx_start(struct usb_gadget *gadget,
 			 struct usb_gadget_driver *driver)
 {
-	struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int retval = -ENOMEM;
 
@@ -1502,35 +1502,35 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 		return -EINVAL;
 
 
-	udc->ep0out->ep.desc = &ctrl_endpt_out_desc;
-	retval = usb_ep_enable(&udc->ep0out->ep);
+	ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
+	retval = usb_ep_enable(&ci->ep0out->ep);
 	if (retval)
 		return retval;
 
-	udc->ep0in->ep.desc = &ctrl_endpt_in_desc;
-	retval = usb_ep_enable(&udc->ep0in->ep);
+	ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
+	retval = usb_ep_enable(&ci->ep0in->ep);
 	if (retval)
 		return retval;
-	spin_lock_irqsave(&udc->lock, flags);
-
-	udc->driver = driver;
-	pm_runtime_get_sync(&udc->gadget.dev);
-	if (udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
-		if (udc->vbus_active) {
-			if (udc->platdata->flags & CI13XXX_REGS_SHARED)
-				hw_device_reset(udc, USBMODE_CM_DC);
+	spin_lock_irqsave(&ci->lock, flags);
+
+	ci->driver = driver;
+	pm_runtime_get_sync(&ci->gadget.dev);
+	if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
+		if (ci->vbus_active) {
+			if (ci->platdata->flags & CI13XXX_REGS_SHARED)
+				hw_device_reset(ci, USBMODE_CM_DC);
 		} else {
-			pm_runtime_put_sync(&udc->gadget.dev);
+			pm_runtime_put_sync(&ci->gadget.dev);
 			goto done;
 		}
 	}
 
-	retval = hw_device_state(udc, udc->ep0out->qh.dma);
+	retval = hw_device_state(ci, ci->ep0out->qh.dma);
 	if (retval)
-		pm_runtime_put_sync(&udc->gadget.dev);
+		pm_runtime_put_sync(&ci->gadget.dev);
 
  done:
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 	return retval;
 }
 
@@ -1540,25 +1540,25 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 static int ci13xxx_stop(struct usb_gadget *gadget,
 			struct usb_gadget_driver *driver)
 {
-	struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 
-	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
-			udc->vbus_active) {
-		hw_device_state(udc, 0);
-		if (udc->platdata->notify_event)
-			udc->platdata->notify_event(udc,
+	if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
+			ci->vbus_active) {
+		hw_device_state(ci, 0);
+		if (ci->platdata->notify_event)
+			ci->platdata->notify_event(ci,
 			CI13XXX_CONTROLLER_STOPPED_EVENT);
-		udc->driver = NULL;
-		spin_unlock_irqrestore(&udc->lock, flags);
-		_gadget_stop_activity(&udc->gadget);
-		spin_lock_irqsave(&udc->lock, flags);
-		pm_runtime_put(&udc->gadget.dev);
+		ci->driver = NULL;
+		spin_unlock_irqrestore(&ci->lock, flags);
+		_gadget_stop_activity(&ci->gadget);
+		spin_lock_irqsave(&ci->lock, flags);
+		pm_runtime_put(&ci->gadget.dev);
 	}
 
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return 0;
 }
@@ -1567,64 +1567,64 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
  * BUS block
  *****************************************************************************/
 /**
- * udc_irq: udc interrupt handler
+ * udc_irq: ci interrupt handler
  *
  * This function returns IRQ_HANDLED if the IRQ has been handled
  * It locks access to registers
  */
-static irqreturn_t udc_irq(struct ci13xxx *udc)
+static irqreturn_t udc_irq(struct ci13xxx *ci)
 {
 	irqreturn_t retval;
 	u32 intr;
 
-	if (udc == NULL)
+	if (ci == NULL)
 		return IRQ_HANDLED;
 
-	spin_lock(&udc->lock);
+	spin_lock(&ci->lock);
 
-	if (udc->platdata->flags & CI13XXX_REGS_SHARED) {
-		if (hw_read(udc, OP_USBMODE, USBMODE_CM) !=
+	if (ci->platdata->flags & CI13XXX_REGS_SHARED) {
+		if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
 				USBMODE_CM_DC) {
-			spin_unlock(&udc->lock);
+			spin_unlock(&ci->lock);
 			return IRQ_NONE;
 		}
 	}
-	intr = hw_test_and_clear_intr_active(udc);
+	intr = hw_test_and_clear_intr_active(ci);
 	dbg_interrupt(intr);
 
 	if (intr) {
 		/* order defines priority - do NOT change it */
 		if (USBi_URI & intr)
-			isr_reset_handler(udc);
+			isr_reset_handler(ci);
 
 		if (USBi_PCI & intr) {
-			udc->gadget.speed = hw_port_is_high_speed(udc) ?
+			ci->gadget.speed = hw_port_is_high_speed(ci) ?
 				USB_SPEED_HIGH : USB_SPEED_FULL;
-			if (udc->suspended && udc->driver->resume) {
-				spin_unlock(&udc->lock);
-				udc->driver->resume(&udc->gadget);
-				spin_lock(&udc->lock);
-				udc->suspended = 0;
+			if (ci->suspended && ci->driver->resume) {
+				spin_unlock(&ci->lock);
+				ci->driver->resume(&ci->gadget);
+				spin_lock(&ci->lock);
+				ci->suspended = 0;
 			}
 		}
 
 		if (USBi_UI  & intr)
-			isr_tr_complete_handler(udc);
+			isr_tr_complete_handler(ci);
 
 		if (USBi_SLI & intr) {
-			if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
-			    udc->driver->suspend) {
-				udc->suspended = 1;
-				spin_unlock(&udc->lock);
-				udc->driver->suspend(&udc->gadget);
-				spin_lock(&udc->lock);
+			if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
+			    ci->driver->suspend) {
+				ci->suspended = 1;
+				spin_unlock(&ci->lock);
+				ci->driver->suspend(&ci->gadget);
+				spin_lock(&ci->lock);
 			}
 		}
 		retval = IRQ_HANDLED;
 	} else {
 		retval = IRQ_NONE;
 	}
-	spin_unlock(&udc->lock);
+	spin_unlock(&ci->lock);
 
 	return retval;
 }
@@ -1641,109 +1641,109 @@ static void udc_release(struct device *dev)
 
 /**
  * udc_start: initialize gadget role
- * @udc: chipidea controller
+ * @ci: chipidea controller
  */
-static int udc_start(struct ci13xxx *udc)
+static int udc_start(struct ci13xxx *ci)
 {
-	struct device *dev = udc->dev;
+	struct device *dev = ci->dev;
 	int retval = 0;
 
-	spin_lock_init(&udc->lock);
+	spin_lock_init(&ci->lock);
 
-	udc->gadget.ops          = &usb_gadget_ops;
-	udc->gadget.speed        = USB_SPEED_UNKNOWN;
-	udc->gadget.max_speed    = USB_SPEED_HIGH;
-	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = udc->platdata->name;
+	ci->gadget.ops          = &usb_gadget_ops;
+	ci->gadget.speed        = USB_SPEED_UNKNOWN;
+	ci->gadget.max_speed    = USB_SPEED_HIGH;
+	ci->gadget.is_otg       = 0;
+	ci->gadget.name         = ci->platdata->name;
 
-	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&ci->gadget.ep_list);
 
-	dev_set_name(&udc->gadget.dev, "gadget");
-	udc->gadget.dev.dma_mask = dev->dma_mask;
-	udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
-	udc->gadget.dev.parent   = dev;
-	udc->gadget.dev.release  = udc_release;
+	dev_set_name(&ci->gadget.dev, "gadget");
+	ci->gadget.dev.dma_mask = dev->dma_mask;
+	ci->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
+	ci->gadget.dev.parent   = dev;
+	ci->gadget.dev.release  = udc_release;
 
 	/* alloc resources */
-	udc->qh_pool = dma_pool_create("ci13xxx_qh", dev,
+	ci->qh_pool = dma_pool_create("ci13xxx_qh", dev,
 				       sizeof(struct ci13xxx_qh),
 				       64, CI13XXX_PAGE_SIZE);
-	if (udc->qh_pool == NULL)
+	if (ci->qh_pool == NULL)
 		return -ENOMEM;
 
-	udc->td_pool = dma_pool_create("ci13xxx_td", dev,
+	ci->td_pool = dma_pool_create("ci13xxx_td", dev,
 				       sizeof(struct ci13xxx_td),
 				       64, CI13XXX_PAGE_SIZE);
-	if (udc->td_pool == NULL) {
+	if (ci->td_pool == NULL) {
 		retval = -ENOMEM;
 		goto free_qh_pool;
 	}
 
-	retval = init_eps(udc);
+	retval = init_eps(ci);
 	if (retval)
 		goto free_pools;
 
-	udc->gadget.ep0 = &udc->ep0in->ep;
+	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+	ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 
-	if (udc->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
-		if (udc->transceiver == NULL) {
+	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+		if (ci->transceiver == NULL) {
 			retval = -ENODEV;
 			goto free_pools;
 		}
 	}
 
-	if (!(udc->platdata->flags & CI13XXX_REGS_SHARED)) {
-		retval = hw_device_reset(udc, USBMODE_CM_DC);
+	if (!(ci->platdata->flags & CI13XXX_REGS_SHARED)) {
+		retval = hw_device_reset(ci, USBMODE_CM_DC);
 		if (retval)
 			goto put_transceiver;
 	}
 
-	retval = device_register(&udc->gadget.dev);
+	retval = device_register(&ci->gadget.dev);
 	if (retval) {
-		put_device(&udc->gadget.dev);
+		put_device(&ci->gadget.dev);
 		goto put_transceiver;
 	}
 
-	retval = dbg_create_files(&udc->gadget.dev);
+	retval = dbg_create_files(&ci->gadget.dev);
 	if (retval)
 		goto unreg_device;
 
-	if (!IS_ERR_OR_NULL(udc->transceiver)) {
-		retval = otg_set_peripheral(udc->transceiver->otg,
-						&udc->gadget);
+	if (!IS_ERR_OR_NULL(ci->transceiver)) {
+		retval = otg_set_peripheral(ci->transceiver->otg,
+						&ci->gadget);
 		if (retval)
 			goto remove_dbg;
 	}
 
-	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	retval = usb_add_gadget_udc(dev, &ci->gadget);
 	if (retval)
 		goto remove_trans;
 
-	pm_runtime_no_callbacks(&udc->gadget.dev);
-	pm_runtime_enable(&udc->gadget.dev);
+	pm_runtime_no_callbacks(&ci->gadget.dev);
+	pm_runtime_enable(&ci->gadget.dev);
 
 	return retval;
 
 remove_trans:
-	if (!IS_ERR_OR_NULL(udc->transceiver)) {
-		otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
-		usb_put_phy(udc->transceiver);
+	if (!IS_ERR_OR_NULL(ci->transceiver)) {
+		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
+		usb_put_phy(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
 remove_dbg:
-	dbg_remove_files(&udc->gadget.dev);
+	dbg_remove_files(&ci->gadget.dev);
 unreg_device:
-	device_unregister(&udc->gadget.dev);
+	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (!IS_ERR_OR_NULL(udc->transceiver))
-		usb_put_phy(udc->transceiver);
+	if (!IS_ERR_OR_NULL(ci->transceiver))
+		usb_put_phy(ci->transceiver);
 free_pools:
-	dma_pool_destroy(udc->td_pool);
+	dma_pool_destroy(ci->td_pool);
 free_qh_pool:
-	dma_pool_destroy(udc->qh_pool);
+	dma_pool_destroy(ci->qh_pool);
 	return retval;
 }
 
@@ -1752,32 +1752,32 @@ free_qh_pool:
  *
  * No interrupts active, the IRQ has been released
  */
-static void udc_stop(struct ci13xxx *udc)
+static void udc_stop(struct ci13xxx *ci)
 {
 	int i;
 
-	if (udc == NULL)
+	if (ci == NULL)
 		return;
 
-	usb_del_gadget_udc(&udc->gadget);
+	usb_del_gadget_udc(&ci->gadget);
 
-	for (i = 0; i < udc->hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
+	for (i = 0; i < ci->hw_ep_max; i++) {
+		struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
 
-		dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+		dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
 	}
 
-	dma_pool_destroy(udc->td_pool);
-	dma_pool_destroy(udc->qh_pool);
+	dma_pool_destroy(ci->td_pool);
+	dma_pool_destroy(ci->qh_pool);
 
-	if (!IS_ERR_OR_NULL(udc->transceiver)) {
-		otg_set_peripheral(udc->transceiver->otg, NULL);
-		usb_put_phy(udc->transceiver);
+	if (!IS_ERR_OR_NULL(ci->transceiver)) {
+		otg_set_peripheral(ci->transceiver->otg, NULL);
+		usb_put_phy(ci->transceiver);
 	}
-	dbg_remove_files(&udc->gadget.dev);
-	device_unregister(&udc->gadget.dev);
+	dbg_remove_files(&ci->gadget.dev);
+	device_unregister(&ci->gadget.dev);
 	/* my kobject is dynamic, I swear! */
-	memset(&udc->gadget, 0, sizeof(udc->gadget));
+	memset(&ci->gadget, 0, sizeof(ci->gadget));
 }
 
 /**
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index d4cf9706..d2f7e49 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -19,7 +19,7 @@ struct ci13xxx_platform_data {
 
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
-	void	(*notify_event) (struct ci13xxx *udc, unsigned event);
+	void	(*notify_event) (struct ci13xxx *ci, unsigned event);
 };
 
 /* Default offset of capability registers */
-- 
1.7.9.5

[PATCH v9 REBASE 2/9] USB: Chipidea: add unified ci13xxx_{add, remove}_device for platform drivers

[Richard Zhao]

Platform drivers do the similar things to add/remove ci13xxx device, so
create a unified one.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/ci13xxx_msm.c |   34 ++++++----------------------
 drivers/usb/chipidea/ci13xxx_pci.c |   34 +++++-----------------------
 drivers/usb/chipidea/core.c        |   43 ++++++++++++++++++++++++++++++++++++
 include/linux/usb/chipidea.h       |    7 ++++++
 4 files changed, 63 insertions(+), 55 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 5a2fe5f..b01feb3 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -58,43 +58,23 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
 static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci;
-	int ret;
 
 	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
 
-	plat_ci = platform_device_alloc("ci_hdrc", -1);
-	if (!plat_ci) {
-		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
-		return -ENOMEM;
+	plat_ci = ci13xxx_add_device(&pdev->dev,
+				pdev->resource, pdev->num_resources,
+				&ci13xxx_msm_platdata);
+	if (IS_ERR(plat_ci)) {
+		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
+		return PTR_ERR(plat_ci);
 	}
 
-	ret = platform_device_add_resources(plat_ci, pdev->resource,
-					    pdev->num_resources);
-	if (ret) {
-		dev_err(&pdev->dev, "can't add resources to platform device\n");
-		goto put_platform;
-	}
-
-	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata,
-				       sizeof(ci13xxx_msm_platdata));
-	if (ret)
-		goto put_platform;
-
-	ret = platform_device_add(plat_ci);
-	if (ret)
-		goto put_platform;
-
 	platform_set_drvdata(pdev, plat_ci);
 
 	pm_runtime_no_callbacks(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	return 0;
-
-put_platform:
-	platform_device_put(plat_ci);
-
-	return ret;
 }
 
 static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
@@ -102,7 +82,7 @@ static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
 	struct platform_device *plat_ci = platform_get_drvdata(pdev);
 
 	pm_runtime_disable(&pdev->dev);
-	platform_device_unregister(plat_ci);
+	ci13xxx_remove_device(plat_ci);
 
 	return 0;
 }
diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
index cdcac3a..918e149 100644
--- a/drivers/usb/chipidea/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci13xxx_pci.c
@@ -75,13 +75,6 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
-	plat_ci = platform_device_alloc("ci_hdrc", -1);
-	if (!plat_ci) {
-		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
-		retval = -ENOMEM;
-		goto disable_device;
-	}
-
 	memset(res, 0, sizeof(res));
 	res[0].start	= pci_resource_start(pdev, 0);
 	res[0].end	= pci_resource_end(pdev, 0);
@@ -89,32 +82,17 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 	res[1].start	= pdev->irq;
 	res[1].flags	= IORESOURCE_IRQ;
 
-	retval = platform_device_add_resources(plat_ci, res, nres);
-	if (retval) {
-		dev_err(&pdev->dev, "can't add resources to platform device\n");
-		goto put_platform;
+	plat_ci = ci13xxx_add_device(&pdev->dev, res, nres, platdata);
+	if (IS_ERR(plat_ci)) {
+		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
+		retval = PTR_ERR(plat_ci);
+		goto disable_device;
 	}
 
-	retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata));
-	if (retval)
-		goto put_platform;
-
-	dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask);
-	plat_ci->dev.dma_mask = pdev->dev.dma_mask;
-	plat_ci->dev.dma_parms = pdev->dev.dma_parms;
-	plat_ci->dev.parent = &pdev->dev;
-
 	pci_set_drvdata(pdev, plat_ci);
 
-	retval = platform_device_add(plat_ci);
-	if (retval)
-		goto put_platform;
-
 	return 0;
 
- put_platform:
-	pci_set_drvdata(pdev, NULL);
-	platform_device_put(plat_ci);
  disable_device:
 	pci_disable_device(pdev);
  done:
@@ -133,7 +111,7 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
 {
 	struct platform_device *plat_ci = pci_get_drvdata(pdev);
 
-	platform_device_unregister(plat_ci);
+	ci13xxx_remove_device(plat_ci);
 	pci_set_drvdata(pdev, NULL);
 	pci_disable_device(pdev);
 }
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 9a883bd..8b9d06f 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -332,6 +332,49 @@ static irqreturn_t ci_irq(int irq, void *data)
 	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
 }
 
+struct platform_device *ci13xxx_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci13xxx_platform_data *platdata)
+{
+	struct platform_device *pdev;
+	int ret;
+
+	/* FIXME: find a way to choose id */
+	pdev = platform_device_alloc("ci_hdrc", -1);
+	if (!pdev)
+		return ERR_PTR(-ENOMEM);
+
+	pdev->dev.parent = dev;
+	pdev->dev.dma_mask = dev->dma_mask;
+	pdev->dev.dma_parms = dev->dma_parms;
+	dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
+
+	ret = platform_device_add_resources(pdev, res, nres);
+	if (ret)
+		goto err;
+
+	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto err;
+
+	return pdev;
+
+err:
+	platform_device_put(pdev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(ci13xxx_add_device);
+
+void ci13xxx_remove_device(struct platform_device *pdev)
+{
+	platform_device_unregister(pdev);
+}
+EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
+
 static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index d2f7e49..be078f0 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -25,4 +25,11 @@ struct ci13xxx_platform_data {
 /* Default offset of capability registers */
 #define DEF_CAPOFFSET		0x100
 
+/* Add ci13xxx device */
+struct platform_device *ci13xxx_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci13xxx_platform_data *platdata);
+/* Remove ci13xxx device */
+void ci13xxx_remove_device(struct platform_device *pdev);
+
 #endif
-- 
1.7.9.5

[PATCH v9 REBASE 3/9] USB: Chipidea: add ci13xxx device id management

[Richard Zhao]

We use ida_simple_get and ida_simple_remove to manage the ids.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/core.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 8b9d06f..39603d7 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -56,6 +56,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/idr.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -332,17 +333,24 @@ static irqreturn_t ci_irq(int irq, void *data)
 	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
 }
 
+static DEFINE_IDA(ci_ida);
+
 struct platform_device *ci13xxx_add_device(struct device *dev,
 			struct resource *res, int nres,
 			struct ci13xxx_platform_data *platdata)
 {
 	struct platform_device *pdev;
-	int ret;
+	int id, ret;
 
-	/* FIXME: find a way to choose id */
-	pdev = platform_device_alloc("ci_hdrc", -1);
-	if (!pdev)
-		return ERR_PTR(-ENOMEM);
+	id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
+	if (id < 0)
+		return ERR_PTR(id);
+
+	pdev = platform_device_alloc("ci_hdrc", id);
+	if (!pdev) {
+		ret = -ENOMEM;
+		goto put_id;
+	}
 
 	pdev->dev.parent = dev;
 	pdev->dev.dma_mask = dev->dma_mask;
@@ -365,6 +373,8 @@ struct platform_device *ci13xxx_add_device(struct device *dev,
 
 err:
 	platform_device_put(pdev);
+put_id:
+	ida_simple_remove(&ci_ida, id);
 	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(ci13xxx_add_device);
@@ -372,6 +382,7 @@ EXPORT_SYMBOL_GPL(ci13xxx_add_device);
 void ci13xxx_remove_device(struct platform_device *pdev)
 {
 	platform_device_unregister(pdev);
+	ida_simple_remove(&ci_ida, pdev->id);
 }
 EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
 
-- 
1.7.9.5

[PATCH v9 REBASE 4/9] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig

[Richard Zhao]

ci13xxx host needs Root Hub Transaction Translators.

Reported-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Marek Vasut <marex@denx.de>
---
 drivers/usb/chipidea/Kconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index fd36dc8..8337fb5 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC
 
 config USB_CHIPIDEA_HOST
 	bool "ChipIdea host controller"
+	select USB_EHCI_ROOT_HUB_TT
 	help
 	  Say Y here to enable host controller functionality of the
 	  ChipIdea driver.
-- 
1.7.9.5

[PATCH v9 REBASE 5/9] usb: otg: add notify_connect/notify_disconnect callback

[Richard Zhao]

This let usb phy driver has a chance to change hw settings when connect
status change.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 include/linux/usb/otg.h |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 0cb2ec2..45824be 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -128,6 +128,9 @@ struct usb_phy {
 	int	(*set_suspend)(struct usb_phy *x,
 				int suspend);
 
+	/* notify phy connect status change */
+	int	(*notify_connect)(struct usb_phy *x, int port);
+	int	(*notify_disconnect)(struct usb_phy *x, int port);
 };
 
 
@@ -277,6 +280,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend)
 }
 
 static inline int
+usb_phy_notify_connect(struct usb_phy *x, int port)
+{
+	if (x->notify_connect)
+		return x->notify_connect(x, port);
+	else
+		return 0;
+}
+
+static inline int
+usb_phy_notify_disconnect(struct usb_phy *x, int port)
+{
+	if (x->notify_disconnect)
+		return x->notify_disconnect(x, port);
+	else
+		return 0;
+}
+
+static inline int
 otg_start_srp(struct usb_otg *otg)
 {
 	if (otg && otg->start_srp)
-- 
1.7.9.5

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Richard Zhao]

Phy may need to change settings when port connect change.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 drivers/usb/core/hub.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4cc8dc9..2ba9d84 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -20,6 +20,7 @@
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
 #include <linux/usb/quirks.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
@@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		}
 	}
 
+	if (unlikely(hcd->phy && !hdev->parent)) {
+		if (portstatus & USB_PORT_STAT_CONNECTION)
+			usb_phy_notify_connect(hcd->phy, port1);
+		else
+			usb_phy_notify_disconnect(hcd->phy, port1);
+	}
+
 	/* Return now if debouncing failed or nothing is connected or
 	 * the device was "removed".
 	 */
-- 
1.7.9.5

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Greg KH]

On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote:
> Phy may need to change settings when port connect change.
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> Tested-by: Subodh Nijsure <snijsure@grid-net.com>
> ---
>  drivers/usb/core/hub.c |    8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 4cc8dc9..2ba9d84 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -20,6 +20,7 @@
>  #include <linux/usb.h>
>  #include <linux/usbdevice_fs.h>
>  #include <linux/usb/hcd.h>
> +#include <linux/usb/otg.h>
>  #include <linux/usb/quirks.h>
>  #include <linux/kthread.h>
>  #include <linux/mutex.h>
> @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
>  		}
>  	}
>  
> +	if (unlikely(hcd->phy && !hdev->parent)) {

Why is this "unlikely"?  And why mark it as such, is this a "fast path"
that needs the compiler to know this hint to optimize things here?

Please don't use likely() or unlikely() except in places it really is
needed, _and_ you have measured the difference.  Have you done so in
this place?

thanks,

greg k-h

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Richard Zhao]

On Mon, Jul 09, 2012 at 09:57:57AM -0700, Greg KH wrote:
> On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote:
> > Phy may need to change settings when port connect change.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > Tested-by: Subodh Nijsure <snijsure@grid-net.com>
> > ---
> >  drivers/usb/core/hub.c |    8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > index 4cc8dc9..2ba9d84 100644
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/usb.h>
> >  #include <linux/usbdevice_fs.h>
> >  #include <linux/usb/hcd.h>
> > +#include <linux/usb/otg.h>
> >  #include <linux/usb/quirks.h>
> >  #include <linux/kthread.h>
> >  #include <linux/mutex.h>
> > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
> >  		}
> >  	}
> >  
> > +	if (unlikely(hcd->phy && !hdev->parent)) {
> 
> Why is this "unlikely"?  And why mark it as such, is this a "fast path"
> that needs the compiler to know this hint to optimize things here?
> 
> Please don't use likely() or unlikely() except in places it really is
> needed, _and_ you have measured the difference.  Have you done so in
> this place?
It's from a comment by Alan Stern.
http://www.spinics.net/lists/linux-usb/msg64987.html

Actually, for my board, it's not unlikely. But for others which don't
have notify_connect/disconnect, it's unlikely.

Because it's not unlikely for all boards, I prefer remove "unlikely".

Thanks
Richard
> 
> thanks,
> 
> greg k-h
> 

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Alan Stern]

On Tue, 10 Jul 2012, Richard Zhao wrote:

> > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
> > >  		}
> > >  	}
> > >  
> > > +	if (unlikely(hcd->phy && !hdev->parent)) {
> > 
> > Why is this "unlikely"?  And why mark it as such, is this a "fast path"
> > that needs the compiler to know this hint to optimize things here?
> > 
> > Please don't use likely() or unlikely() except in places it really is
> > needed, _and_ you have measured the difference.  Have you done so in
> > this place?
> It's from a comment by Alan Stern.
> http://www.spinics.net/lists/linux-usb/msg64987.html

That comment was made in a somewhat different context.  At the time 
the code was part of an interrupt handler; now it isn't.

> Actually, for my board, it's not unlikely. But for others which don't
> have notify_connect/disconnect, it's unlikely.
> 
> Because it's not unlikely for all boards, I prefer remove "unlikely".

It's no longer a big deal one way or another.  I don't care about the 
"unlikely" because it's on a cold path running in process context.  Go 
ahead and remove it.

Alan Stern

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Richard Zhao]

On Tue, Jul 10, 2012 at 10:24:07AM -0400, Alan Stern wrote:
> On Tue, 10 Jul 2012, Richard Zhao wrote:
> 
> > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
> > > >  		}
> > > >  	}
> > > >  
> > > > +	if (unlikely(hcd->phy && !hdev->parent)) {
> > > 
> > > Why is this "unlikely"?  And why mark it as such, is this a "fast path"
> > > that needs the compiler to know this hint to optimize things here?
> > > 
> > > Please don't use likely() or unlikely() except in places it really is
> > > needed, _and_ you have measured the difference.  Have you done so in
> > > this place?
> > It's from a comment by Alan Stern.
> > http://www.spinics.net/lists/linux-usb/msg64987.html
> 
> That comment was made in a somewhat different context.  At the time 
> the code was part of an interrupt handler; now it isn't.
> 
> > Actually, for my board, it's not unlikely. But for others which don't
> > have notify_connect/disconnect, it's unlikely.
> > 
> > Because it's not unlikely for all boards, I prefer remove "unlikely".
> 
> It's no longer a big deal one way or another.  I don't care about the 
> "unlikely" because it's on a cold path running in process context.  Go 
> ahead and remove it.
Ok. I'll remove it. 

Thanks
Richard
> 
> Alan Stern
> 

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Richard Zhao]

On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote:
> Phy may need to change settings when port connect change.
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> Tested-by: Subodh Nijsure <snijsure@grid-net.com>
> ---
>  drivers/usb/core/hub.c |    8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 4cc8dc9..2ba9d84 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -20,6 +20,7 @@
>  #include <linux/usb.h>
>  #include <linux/usbdevice_fs.h>
>  #include <linux/usb/hcd.h>
> +#include <linux/usb/otg.h>
>  #include <linux/usb/quirks.h>
>  #include <linux/kthread.h>
>  #include <linux/mutex.h>
> @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
>  		}
>  	}
>  
> +	if (unlikely(hcd->phy && !hdev->parent)) {
> +		if (portstatus & USB_PORT_STAT_CONNECTION)
> +			usb_phy_notify_connect(hcd->phy, port1);
> +		else
> +			usb_phy_notify_disconnect(hcd->phy, port1);
There's another issue. When hcd is removed, notify disconnect is not
called. Is it ok, if I remove the above two line and add below patch:

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev)
 	 */
 	device_del(&udev->dev);
 
+	if (udev->parent && !udev->parent->parent) {
+		struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+		usb_phy_notify_disconnect(hcd->phy, udev->portnum);
+	}
+
 	/* Free the device number and delete the parent's children[]
 	 * (or root_hub) pointer.
 	 */


Thanks
Richard
 

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Marek Vasut]

Dear Richard Zhao,

> On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote:
> > Phy may need to change settings when port connect change.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > Tested-by: Subodh Nijsure <snijsure@grid-net.com>
> > ---
> > 
> >  drivers/usb/core/hub.c |    8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > index 4cc8dc9..2ba9d84 100644
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -20,6 +20,7 @@
> > 
> >  #include <linux/usb.h>
> >  #include <linux/usbdevice_fs.h>
> >  #include <linux/usb/hcd.h>
> > 
> > +#include <linux/usb/otg.h>
> > 
> >  #include <linux/usb/quirks.h>
> >  #include <linux/kthread.h>
> >  #include <linux/mutex.h>
> > 
> > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub
> > *hub, int port1,
> > 
> >  		}
> >  	
> >  	}
> > 
> > +	if (unlikely(hcd->phy && !hdev->parent)) {
> > +		if (portstatus & USB_PORT_STAT_CONNECTION)
> > +			usb_phy_notify_connect(hcd->phy, port1);
> > +		else
> > +			usb_phy_notify_disconnect(hcd->phy, port1);
> 
> There's another issue. When hcd is removed, notify disconnect is not
> called. Is it ok, if I remove the above two line and add below patch:
> 
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev)
>  	 */
>  	device_del(&udev->dev);
> 
> +	if (udev->parent && !udev->parent->parent) {
> +		struct usb_hcd *hcd = bus_to_hcd(udev->bus);
> +		usb_phy_notify_disconnect(hcd->phy, udev->portnum);
> +	}

Shouldn't that go before device_del() ?

> +
>  	/* Free the device number and delete the parent's children[]
>  	 * (or root_hub) pointer.
>  	 */
> 
> 
> Thanks
> Richard

Best regards,
Marek Vasut

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Richard Zhao]

On Tue, Jul 10, 2012 at 05:22:20AM +0200, Marek Vasut wrote:
> Dear Richard Zhao,
> 
> > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote:
> > > Phy may need to change settings when port connect change.
> > > 
> > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > > Tested-by: Subodh Nijsure <snijsure@grid-net.com>
> > > ---
> > > 
> > >  drivers/usb/core/hub.c |    8 ++++++++
> > >  1 file changed, 8 insertions(+)
> > > 
> > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > > index 4cc8dc9..2ba9d84 100644
> > > --- a/drivers/usb/core/hub.c
> > > +++ b/drivers/usb/core/hub.c
> > > @@ -20,6 +20,7 @@
> > > 
> > >  #include <linux/usb.h>
> > >  #include <linux/usbdevice_fs.h>
> > >  #include <linux/usb/hcd.h>
> > > 
> > > +#include <linux/usb/otg.h>
> > > 
> > >  #include <linux/usb/quirks.h>
> > >  #include <linux/kthread.h>
> > >  #include <linux/mutex.h>
> > > 
> > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub
> > > *hub, int port1,
> > > 
> > >  		}
> > >  	
> > >  	}
> > > 
> > > +	if (unlikely(hcd->phy && !hdev->parent)) {
> > > +		if (portstatus & USB_PORT_STAT_CONNECTION)
> > > +			usb_phy_notify_connect(hcd->phy, port1);
> > > +		else
> > > +			usb_phy_notify_disconnect(hcd->phy, port1);
> > 
> > There's another issue. When hcd is removed, notify disconnect is not
> > called. Is it ok, if I remove the above two line and add below patch:
> > 
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev)
> >  	 */
> >  	device_del(&udev->dev);
> > 
> > +	if (udev->parent && !udev->parent->parent) {
> > +		struct usb_hcd *hcd = bus_to_hcd(udev->bus);
> > +		usb_phy_notify_disconnect(hcd->phy, udev->portnum);
> > +	}
> 
> Shouldn't that go before device_del() ?
Any difference?

Thanks
Richard
> 
> > +
> >  	/* Free the device number and delete the parent's children[]
> >  	 * (or root_hub) pointer.
> >  	 */
> > 
> > 
> > Thanks
> > Richard
> 
> Best regards,
> Marek Vasut
> 

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Marek Vasut]

Dear Richard Zhao,

[...]

> > > --- a/drivers/usb/core/hub.c
> > > +++ b/drivers/usb/core/hub.c
> > > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev)
> > > 
> > >  	 */
> > >  	
> > >  	device_del(&udev->dev);
> > > 
> > > +	if (udev->parent && !udev->parent->parent) {
> > > +		struct usb_hcd *hcd = bus_to_hcd(udev->bus);
> > > +		usb_phy_notify_disconnect(hcd->phy, udev->portnum);
> > > +	}
> > 
> > Shouldn't that go before device_del() ?
> 
> Any difference?

I was worried some corruption of other members in udev structure might happen, 
but I'm not so sure anymore after taking deer look.

> Thanks
> Richard

Best regards,
Marek Vasut

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Alan Stern]

On Tue, 10 Jul 2012, Richard Zhao wrote:

> On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote:
> > Phy may need to change settings when port connect change.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > Tested-by: Subodh Nijsure <snijsure@grid-net.com>
> > ---
> >  drivers/usb/core/hub.c |    8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > index 4cc8dc9..2ba9d84 100644
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/usb.h>
> >  #include <linux/usbdevice_fs.h>
> >  #include <linux/usb/hcd.h>
> > +#include <linux/usb/otg.h>
> >  #include <linux/usb/quirks.h>
> >  #include <linux/kthread.h>
> >  #include <linux/mutex.h>
> > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
> >  		}
> >  	}
> >  
> > +	if (unlikely(hcd->phy && !hdev->parent)) {
> > +		if (portstatus & USB_PORT_STAT_CONNECTION)
> > +			usb_phy_notify_connect(hcd->phy, port1);
> > +		else
> > +			usb_phy_notify_disconnect(hcd->phy, port1);
> There's another issue. When hcd is removed, notify disconnect is not
> called. Is it ok, if I remove the above two line and add below patch:

You should keep those two lines, since it's possible for a disconnect
to occur without usb_disconnect() being called.  This happens when a
device fails to enumerate.

> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev)
>  	 */
>  	device_del(&udev->dev);
>  
> +	if (udev->parent && !udev->parent->parent) {
> +		struct usb_hcd *hcd = bus_to_hcd(udev->bus);
> +		usb_phy_notify_disconnect(hcd->phy, udev->portnum);
> +	}

You might not want to add this.  usb_disconnect() can get called in 
situations where the device remains physically connected (if the 
firmware changes during a reset, for example).

If you want to notify the phy when the root hub is removed, there are 
better places to do it.  One possibility is in hub_quiesce(), another 
is in usb_remove_hcd().

Alan Stern

[PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change

[Richard Zhao]

On Tue, Jul 10, 2012 at 11:07:14AM -0400, Alan Stern wrote:
> On Tue, 10 Jul 2012, Richard Zhao wrote:
> 
> > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote:
> > > Phy may need to change settings when port connect change.
> > > 
> > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > > Tested-by: Subodh Nijsure <snijsure@grid-net.com>
> > > ---
> > >  drivers/usb/core/hub.c |    8 ++++++++
> > >  1 file changed, 8 insertions(+)
> > > 
> > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > > index 4cc8dc9..2ba9d84 100644
> > > --- a/drivers/usb/core/hub.c
> > > +++ b/drivers/usb/core/hub.c
> > > @@ -20,6 +20,7 @@
> > >  #include <linux/usb.h>
> > >  #include <linux/usbdevice_fs.h>
> > >  #include <linux/usb/hcd.h>
> > > +#include <linux/usb/otg.h>
> > >  #include <linux/usb/quirks.h>
> > >  #include <linux/kthread.h>
> > >  #include <linux/mutex.h>
> > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
> > >  		}
> > >  	}
> > >  
> > > +	if (unlikely(hcd->phy && !hdev->parent)) {
> > > +		if (portstatus & USB_PORT_STAT_CONNECTION)
> > > +			usb_phy_notify_connect(hcd->phy, port1);
> > > +		else
> > > +			usb_phy_notify_disconnect(hcd->phy, port1);
> > There's another issue. When hcd is removed, notify disconnect is not
> > called. Is it ok, if I remove the above two line and add below patch:
> 
> You should keep those two lines, since it's possible for a disconnect
> to occur without usb_disconnect() being called.  This happens when a
> device fails to enumerate.
> 
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev)
> >  	 */
> >  	device_del(&udev->dev);
> >  
> > +	if (udev->parent && !udev->parent->parent) {
> > +		struct usb_hcd *hcd = bus_to_hcd(udev->bus);
> > +		usb_phy_notify_disconnect(hcd->phy, udev->portnum);
> > +	}
> 
> You might not want to add this.  usb_disconnect() can get called in 
> situations where the device remains physically connected (if the 
> firmware changes during a reset, for example).
> 
> If you want to notify the phy when the root hub is removed, there are 
> better places to do it.  One possibility is in hub_quiesce(), another 
> is in usb_remove_hcd().
Thanks. I'll need more testing, and won't add it in this patch.

Richard
> 
> Alan Stern
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH v9 REBASE 7/9] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 drivers/usb/chipidea/ci.h    |    2 ++
 drivers/usb/chipidea/core.c  |    4 ++++
 drivers/usb/chipidea/host.c  |    1 +
 drivers/usb/chipidea/udc.c   |   11 +++++++----
 include/linux/usb/chipidea.h |    3 +++
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 9655e35..d738603 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -160,6 +160,8 @@ struct ci13xxx {
 
 	struct ci13xxx_platform_data	*platdata;
 	int				vbus_active;
+	/* FIXME: some day, we'll not use global phy */
+	bool				global_phy;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 39603d7..1083585 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -419,6 +419,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 
 	ci->dev = dev;
 	ci->platdata = dev->platform_data;
+	if (ci->platdata->phy)
+		ci->transceiver = ci->platdata->phy;
+	else
+		ci->global_phy = true;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 4a4fdb8..ebff9f4 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -117,6 +117,7 @@ static int host_start(struct ci13xxx *ci)
 	hcd->has_tt = 1;
 
 	hcd->power_budget = ci->platdata->power_budget;
+	hcd->phy = ci->transceiver;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ba8284e..c7a032a 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1685,7 +1685,8 @@ static int udc_start(struct ci13xxx *ci)
 
 	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (ci->global_phy)
+		ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 
 	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (ci->transceiver == NULL) {
@@ -1729,7 +1730,8 @@ static int udc_start(struct ci13xxx *ci)
 remove_trans:
 	if (!IS_ERR_OR_NULL(ci->transceiver)) {
 		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
-		usb_put_phy(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_phy(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
@@ -1738,7 +1740,7 @@ remove_dbg:
 unreg_device:
 	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (!IS_ERR_OR_NULL(ci->transceiver))
+	if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy)
 		usb_put_phy(ci->transceiver);
 free_pools:
 	dma_pool_destroy(ci->td_pool);
@@ -1772,7 +1774,8 @@ static void udc_stop(struct ci13xxx *ci)
 
 	if (!IS_ERR_OR_NULL(ci->transceiver)) {
 		otg_set_peripheral(ci->transceiver->otg, NULL);
-		usb_put_phy(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_phy(ci->transceiver);
 	}
 	dbg_remove_files(&ci->gadget.dev);
 	device_unregister(&ci->gadget.dev);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index be078f0..544825d 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
 #ifndef __LINUX_USB_CHIPIDEA_H
 #define __LINUX_USB_CHIPIDEA_H
 
+#include <linux/usb/otg.h>
+
 struct ci13xxx;
 struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
+	struct usb_phy	*phy;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.9.5

[PATCH v9 REBASE 8/9] usb: otg: add basic mxs phy driver support

[Richard Zhao]

mxs phy is used in Freescale i.MX SoCs, for example
imx23, imx28, imx6Q. This patch adds the basic host
support.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Peter Chen <peter.chen@freescale.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 Documentation/devicetree/bindings/usb/mxs-phy.txt |   13 ++
 drivers/usb/otg/Kconfig                           |   10 ++
 drivers/usb/otg/Makefile                          |    1 +
 drivers/usb/otg/mxs-phy.c                         |  186 +++++++++++++++++++++
 4 files changed, 210 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
 create mode 100644 drivers/usb/otg/mxs-phy.c

diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
new file mode 100644
index 0000000..5835b27
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -0,0 +1,13 @@
+* Freescale MXS USB Phy Device
+
+Required properties:
+- compatible: Should be "fsl,imx23-usbphy"
+- reg: Should contain registers location and length
+- interrupts: Should contain phy interrupt
+
+Example:
+usbphy1: usbphy at 020c9000 {
+	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+	reg = <0x020c9000 0x1000>;
+	interrupts = <0 44 0x04>;
+};
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5c87db0..13fd1ddf 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -116,6 +116,16 @@ config FSL_USB2_OTG
 	help
 	  Enable this to support Freescale USB OTG transceiver.
 
+config USB_MXS_PHY
+	tristate "Freescale MXS USB PHY support"
+	depends on ARCH_MXC || ARCH_MXS
+	select STMP_DEVICE
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the Freescale MXS USB PHY.
+
+	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
+
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
 	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 41aa509..a844b8d 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_USB_MSM_OTG)	+= msm_otg.o
 obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
 fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o
 obj-$(CONFIG_FSL_USB2_OTG)	+= fsl_usb2_otg.o
+obj-$(CONFIG_USB_MXS_PHY)	+= mxs-phy.o
 obj-$(CONFIG_USB_MV_OTG)	+= mv_otg.o
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
new file mode 100644
index 0000000..c1a67cb
--- /dev/null
+++ b/drivers/usb/otg/mxs-phy.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+#include <linux/stmp_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#define DRIVER_NAME "mxs_phy"
+
+#define HW_USBPHY_PWD				0x00
+#define HW_USBPHY_CTRL				0x30
+#define HW_USBPHY_CTRL_SET			0x34
+#define HW_USBPHY_CTRL_CLR			0x38
+
+#define BM_USBPHY_CTRL_SFTRST			BIT(31)
+#define BM_USBPHY_CTRL_CLKGATE			BIT(30)
+#define BM_USBPHY_CTRL_ENUTMILEVEL3		BIT(15)
+#define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
+
+struct mxs_phy {
+	struct usb_phy phy;
+	struct clk *clk;
+};
+
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+static void mxs_phy_hw_init(struct mxs_phy *mxs_phy)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+
+	stmp_reset_block(base + HW_USBPHY_CTRL);
+
+	/* Power up the PHY */
+	writel_relaxed(0, base + HW_USBPHY_PWD);
+
+	/* enable FS/LS device */
+	writel_relaxed(BM_USBPHY_CTRL_ENUTMILEVEL2 |
+			BM_USBPHY_CTRL_ENUTMILEVEL3,
+			base + HW_USBPHY_CTRL_SET);
+}
+
+static int mxs_phy_init(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	clk_prepare_enable(mxs_phy->clk);
+	mxs_phy_hw_init(mxs_phy);
+
+	return 0;
+}
+
+static void mxs_phy_shutdown(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	writel_relaxed(BM_USBPHY_CTRL_CLKGATE,
+			phy->io_priv + HW_USBPHY_CTRL_SET);
+
+	clk_disable_unprepare(mxs_phy->clk);
+}
+
+static int mxs_phy_on_connect(struct usb_phy *phy, int port)
+{
+	dev_dbg(phy->dev, "Connect on port %d\n", port);
+
+	mxs_phy_hw_init(to_mxs_phy(phy));
+	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+			phy->io_priv + HW_USBPHY_CTRL_SET);
+
+	return 0;
+}
+
+static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
+{
+	dev_dbg(phy->dev, "Disconnect on port %d\n", port);
+
+	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+			phy->io_priv + HW_USBPHY_CTRL_CLR);
+
+	return 0;
+}
+
+static int mxs_phy_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *base;
+	struct clk *clk;
+	struct mxs_phy *mxs_phy;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't get device resources\n");
+		return -ENOENT;
+	}
+
+	base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!base)
+		return -EBUSY;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev,
+			"can't get the clock, err=%ld", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
+	if (!mxs_phy) {
+		dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n");
+		return -ENOMEM;
+	}
+
+	mxs_phy->phy.io_priv		= base;
+	mxs_phy->phy.dev		= &pdev->dev;
+	mxs_phy->phy.label		= DRIVER_NAME;
+	mxs_phy->phy.init		= mxs_phy_init;
+	mxs_phy->phy.shutdown		= mxs_phy_shutdown;
+	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
+	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
+
+	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
+
+	mxs_phy->clk = clk;
+
+	platform_set_drvdata(pdev, &mxs_phy->phy);
+
+	return 0;
+}
+
+static int __devexit mxs_phy_remove(struct platform_device *pdev)
+{
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx23-usbphy", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
+static struct platform_driver mxs_phy_driver = {
+	.probe = mxs_phy_probe,
+	.remove = __devexit_p(mxs_phy_remove),
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = mxs_phy_dt_ids,
+	 },
+};
+
+static int __init mxs_phy_module_init(void)
+{
+	return platform_driver_register(&mxs_phy_driver);
+}
+postcore_initcall(mxs_phy_module_init);
+
+static void __exit mxs_phy_module_exit(void)
+{
+	platform_driver_unregister(&mxs_phy_driver);
+}
+module_exit(mxs_phy_module_exit);
+
+MODULE_ALIAS("platform:mxs-usb-phy");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
+MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
+MODULE_LICENSE("GPL");
-- 
1.7.9.5

[PATCH v9 REBASE 9/9] usb: chipidea: add imx platform driver

[Richard Zhao]

This patch supports only the host-mode functionality so far.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |   18 ++
 drivers/usb/chipidea/Makefile                      |    3 +
 drivers/usb/chipidea/ci13xxx_imx.c                 |  198 ++++++++++++++++++++
 3 files changed, 219 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
 create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
new file mode 100644
index 0000000..2c29041
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -0,0 +1,18 @@
+* Freescale i.MX ci13xxx usb controllers
+
+Required properties:
+- compatible: Should be "fsl,imx27-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Optional properties:
+- fsl,usbphy: phandler of usb phy that connects to the only one port
+- vbus-supply: regulator for vbus
+
+Examples:
+usb at 02184000 { /* USB OTG */
+	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+	reg = <0x02184000 0x200>;
+	interrupts = <0 43 0x04>;
+	fsl,usbphy = <&usbphy1>;
+};
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index b69900a..5c66d9c 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -14,3 +14,6 @@ ifneq ($(CONFIG_PCI),)
 	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_pci.o
 endif
 
+ifneq ($(CONFIG_OF_DEVICE),)
+	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o
+endif
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
new file mode 100644
index 0000000..ef60d06
--- /dev/null
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/chipidea.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+
+#include "ci.h"
+
+#define pdev_to_phy(pdev) \
+	((struct usb_phy *)platform_get_drvdata(pdev))
+
+struct ci13xxx_imx_data {
+	struct device_node *phy_np;
+	struct usb_phy *phy;
+	struct platform_device *ci_pdev;
+	struct clk *clk;
+	struct regulator *reg_vbus;
+};
+
+static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
+	.name			= "ci13xxx_imx",
+	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
+				  CI13XXX_PULLUP_ON_VBUS |
+				  CI13XXX_DISABLE_STREAMING,
+	.capoffset		= DEF_CAPOFFSET,
+};
+
+static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
+{
+	struct ci13xxx_imx_data *data;
+	struct platform_device *plat_ci, *phy_pdev;
+	struct device_node *phy_np;
+	struct resource *res;
+	struct regulator *reg_vbus;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Can't get device resources!\n");
+		return -ENOENT;
+	}
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk)) {
+		dev_err(&pdev->dev,
+			"Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
+		return PTR_ERR(data->clk);
+	}
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to prepare or enable clock, err=%d\n", ret);
+		return ret;
+	}
+
+	phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
+	if (phy_np) {
+		data->phy_np = phy_np;
+		phy_pdev = of_find_device_by_node(phy_np);
+		if (phy_pdev) {
+			struct usb_phy *phy;
+			phy = pdev_to_phy(phy_pdev);
+			if (phy &&
+			    try_module_get(phy_pdev->dev.driver->owner)) {
+				usb_phy_init(phy);
+				data->phy = phy;
+			}
+		}
+	}
+
+	/* we only support host now, so enable vbus here */
+	reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
+	if (!IS_ERR(reg_vbus)) {
+		ret = regulator_enable(reg_vbus);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to enable vbus regulator, err=%d\n",
+				ret);
+			goto put_np;
+		}
+		data->reg_vbus = reg_vbus;
+	} else {
+		reg_vbus = NULL;
+	}
+
+	ci13xxx_imx_platdata.phy = data->phy;
+
+	if (!pdev->dev.dma_mask) {
+		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
+				      sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+		if (!pdev->dev.dma_mask) {
+			ret = -ENOMEM;
+			dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
+			goto err;
+		}
+		*pdev->dev.dma_mask = DMA_BIT_MASK(32);
+		dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
+	}
+	plat_ci = ci13xxx_add_device(&pdev->dev,
+				pdev->resource, pdev->num_resources,
+				&ci13xxx_imx_platdata);
+	if (IS_ERR(plat_ci)) {
+		ret = PTR_ERR(plat_ci);
+		dev_err(&pdev->dev,
+			"Can't register ci_hdrc platform device, err=%d\n",
+			ret);
+		goto err;
+	}
+
+	data->ci_pdev = plat_ci;
+	platform_set_drvdata(pdev, data);
+
+	pm_runtime_no_callbacks(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err:
+	if (reg_vbus)
+		regulator_disable(reg_vbus);
+put_np:
+	if (phy_np)
+		of_node_put(phy_np);
+	clk_disable_unprepare(data->clk);
+	return ret;
+}
+
+static int __devexit ci13xxx_imx_remove(struct platform_device *pdev)
+{
+	struct ci13xxx_imx_data *data = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	ci13xxx_remove_device(data->ci_pdev);
+
+	if (data->reg_vbus)
+		regulator_disable(data->reg_vbus);
+
+	if (data->phy) {
+		usb_phy_shutdown(data->phy);
+		module_put(data->phy->dev->driver->owner);
+	}
+
+	of_node_put(data->phy_np);
+
+	clk_disable_unprepare(data->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id ci13xxx_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx27-usb", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids);
+
+static struct platform_driver ci13xxx_imx_driver = {
+	.probe = ci13xxx_imx_probe,
+	.remove = __devexit_p(ci13xxx_imx_remove),
+	.driver = {
+		.name = "imx_usb",
+		.owner = THIS_MODULE,
+		.of_match_table = ci13xxx_imx_dt_ids,
+	 },
+};
+
+module_platform_driver(ci13xxx_imx_driver);
+
+MODULE_ALIAS("platform:imx-usb");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CI13xxx i.MX USB binding");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
-- 
1.7.9.5

[PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree

[Greg KH]

On Sat, Jul 07, 2012 at 10:56:39PM +0800, Richard Zhao wrote:
> The work is based on  ci13xxx rework done by Alexander Shishkin.
> 
> To let Greg pick up, I also added patches Alex queued that I depends on.

I've applied everything but patch number 6, which I've responded to
with some questions about it.

thanks,

greg k-h

[PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree

[Marek Vasut]

Dear Greg KH,

> On Sat, Jul 07, 2012 at 10:56:39PM +0800, Richard Zhao wrote:
> > The work is based on  ci13xxx rework done by Alexander Shishkin.
> > 
> > To let Greg pick up, I also added patches Alex queued that I depends on.
> 
> I've applied everything but patch number 6, which I've responded to
> with some questions about it.

That #6 emerged after discussion with Alan. It's unlikely on most hardware, but 
there are a few pieces where that case will happen.

> thanks,
> 
> greg k-h

Best regards,
Marek Vasut