From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/16] ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
Date: Fri, 20 Jul 2012 19:35:45 +0200 [thread overview]
Message-ID: <1342805751-18048-11-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1342805751-18048-1-git-send-email-andrew@lunn.ch>
Now that the GPIO controllers have been converted over to DT,
described the gpio-keys in DT.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
---
arch/arm/boot/dts/kirkwood-ib62x0.dts | 16 ++++++++++++++++
arch/arm/mach-kirkwood/board-ib62x0.c | 31 -------------------------------
2 files changed, 16 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index f8e2bc6..6726aa9 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -46,4 +46,20 @@
};
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button at 1 {
+ label = "USB Copy";
+ linux,code = <133>;
+ gpios = <&gpio0 29 1>;
+ };
+ button at 2 {
+ label = "Reset";
+ linux,code = <0x198>;
+ gpios = <&gpio0 28 1>;
+ };
+ };
};
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 56d198e..f30065e 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -18,7 +18,6 @@
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
@@ -85,35 +84,6 @@ static struct platform_device ib62x0_led_device = {
}
};
-static struct gpio_keys_button ib62x0_button_pins[] = {
- {
- .code = KEY_COPY,
- .gpio = 29,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 28,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data ib62x0_button_data = {
- .buttons = ib62x0_button_pins,
- .nbuttons = ARRAY_SIZE(ib62x0_button_pins),
-};
-
-static struct platform_device ib62x0_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ib62x0_button_data,
- }
-};
-
static void ib62x0_power_off(void)
{
gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
@@ -129,7 +99,6 @@ void __init ib62x0_init(void)
kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
platform_device_register(&ib62x0_led_device);
- platform_device_register(&ib62x0_button_device);
if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
pm_power_off = ib62x0_power_off;
--
1.7.10
next prev parent reply other threads:[~2012-07-20 17:35 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-20 17:35 [PATCH 00/16] Orion DT conversions and fixes Andrew Lunn
2012-07-20 17:35 ` [PATCH 1/16] ARM: Orion: DT support for IRQ and GPIO Controllers Andrew Lunn
2012-07-20 17:35 ` [PATCH 2/16] SPI: Refactor spi-orion to use SPI framework queue Andrew Lunn
2012-07-22 7:22 ` Linus Walleij
2012-07-22 9:53 ` Andrew Lunn
2012-07-22 19:07 ` Mark Brown
2012-07-22 19:32 ` Andrew Lunn
2012-07-22 22:42 ` Mark Brown
2012-07-23 7:27 ` Andrew Lunn
2012-07-23 9:37 ` Mark Brown
2012-07-23 10:08 ` [PATCH] spi-orion: add device tree binding Andrew Lunn
2012-07-23 10:43 ` Mark Brown
2012-07-23 10:59 ` Andrew Lunn
2012-07-23 11:12 ` Mark Brown
2012-07-23 17:43 ` Arnd Bergmann
2012-07-23 10:44 ` Mark Brown
2012-07-23 10:50 ` Andrew Lunn
2012-07-23 10:16 ` [PATCH 2/16] SPI: Refactor spi-orion to use SPI framework queue Andrew Lunn
2012-07-23 10:23 ` Mark Brown
2012-07-23 10:49 ` Andrew Lunn
2012-07-23 11:11 ` Mark Brown
2012-07-23 10:53 ` Sergei Shtylyov
2012-07-23 11:02 ` Andrew Lunn
2012-07-20 17:35 ` [PATCH 3/16] ARM: Kirkwood: Ensure runit clock always ticks Andrew Lunn
2012-07-20 17:35 ` [PATCH 4/16] ARM: Orion: Add arch support needed for I2C via DT Andrew Lunn
2012-07-20 17:35 ` [PATCH 5/16] Kirkwood: Add basic device tree support for QNAP TS219 Andrew Lunn
2012-07-20 17:35 ` [PATCH 6/16] ARM: Orion: DTify the watchdog timer Andrew Lunn
2012-07-20 17:35 ` [PATCH 7/16] ATA: sata_mv: Add device tree support Andrew Lunn
2012-07-20 17:35 ` [PATCH 8/16] ARM: Kirkwood: Use DT to configure SATA device Andrew Lunn
2012-07-20 17:35 ` [PATCH 9/16] ARM: Kirkwood: Describe DNS325 temperature sensor in DT Andrew Lunn
2012-07-20 17:35 ` Andrew Lunn [this message]
2012-07-20 17:35 ` [PATCH 11/16] ARM: Kirkwood: Describe iConnects " Andrew Lunn
2012-07-20 17:35 ` [PATCH 12/16] ARM: Kirkwood: Describe Dreamplug LEDs " Andrew Lunn
2012-07-20 17:35 ` [PATCH 13/16] ARM: Kirkwood: Describe GoFlex Net LEDs and SATA " Andrew Lunn
2012-07-20 17:35 ` [PATCH 14/16] ARM: Kirkwood: Describe ib62x0 LEDs " Andrew Lunn
2012-07-20 17:35 ` [PATCH 15/16] ARM: Kirkwood: Describe iConnect " Andrew Lunn
2012-07-30 21:35 ` Adam Baker
2012-07-31 6:36 ` Andrew Lunn
2012-07-31 7:08 ` Arnaud Patard (Rtp)
2012-07-31 7:20 ` Andrew Lunn
2012-07-31 8:59 ` Arnaud Patard (Rtp)
2012-07-20 17:35 ` [PATCH 16/16] ARM: Kirkwood: Replace mrvl with marvell Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342805751-18048-11-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).