From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 11/16] ARM: Kirkwood: Describe iConnects temperature sensor in DT.
Date: Fri, 20 Jul 2012 19:35:46 +0200 [thread overview]
Message-ID: <1342805751-18048-12-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1342805751-18048-1-git-send-email-andrew@lunn.ch>
Now that we have I2C support in DT, describe the LM63 in
the DT file for the iConnect.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-iconnect.dts | 8 ++++++++
arch/arm/mach-kirkwood/board-iconnect.c | 10 ----------
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 1ba75d4..a7dd07b 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -18,6 +18,14 @@
};
ocp at f1000000 {
+ i2c at 11000 {
+ status = "okay";
+
+ lm63: lm63 at 4c {
+ compatible = "national,lm63";
+ reg = <0x4c>;
+ };
+ };
serial at 12000 {
clock-frequency = <200000000>;
status = "ok";
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index b0d3cc4..df043aa 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -20,7 +20,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <asm/mach/arch.h>
@@ -90,12 +89,6 @@ static unsigned int iconnect_mpp_config[] __initdata = {
0
};
-static struct i2c_board_info __initdata iconnect_board_info[] = {
- {
- I2C_BOARD_INFO("lm63", 0x4c),
- },
-};
-
static struct mtd_partition iconnect_nand_parts[] = {
{
.name = "flash",
@@ -142,9 +135,6 @@ void __init iconnect_init(void)
{
kirkwood_mpp_conf(iconnect_mpp_config);
kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
- kirkwood_i2c_init();
- i2c_register_board_info(0, iconnect_board_info,
- ARRAY_SIZE(iconnect_board_info));
kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
--
1.7.10
next prev parent reply other threads:[~2012-07-20 17:35 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-20 17:35 [PATCH 00/16] Orion DT conversions and fixes Andrew Lunn
2012-07-20 17:35 ` [PATCH 1/16] ARM: Orion: DT support for IRQ and GPIO Controllers Andrew Lunn
2012-07-20 17:35 ` [PATCH 2/16] SPI: Refactor spi-orion to use SPI framework queue Andrew Lunn
2012-07-22 7:22 ` Linus Walleij
2012-07-22 9:53 ` Andrew Lunn
2012-07-22 19:07 ` Mark Brown
2012-07-22 19:32 ` Andrew Lunn
2012-07-22 22:42 ` Mark Brown
2012-07-23 7:27 ` Andrew Lunn
2012-07-23 9:37 ` Mark Brown
2012-07-23 10:08 ` [PATCH] spi-orion: add device tree binding Andrew Lunn
2012-07-23 10:43 ` Mark Brown
2012-07-23 10:59 ` Andrew Lunn
2012-07-23 11:12 ` Mark Brown
2012-07-23 17:43 ` Arnd Bergmann
2012-07-23 10:44 ` Mark Brown
2012-07-23 10:50 ` Andrew Lunn
2012-07-23 10:16 ` [PATCH 2/16] SPI: Refactor spi-orion to use SPI framework queue Andrew Lunn
2012-07-23 10:23 ` Mark Brown
2012-07-23 10:49 ` Andrew Lunn
2012-07-23 11:11 ` Mark Brown
2012-07-23 10:53 ` Sergei Shtylyov
2012-07-23 11:02 ` Andrew Lunn
2012-07-20 17:35 ` [PATCH 3/16] ARM: Kirkwood: Ensure runit clock always ticks Andrew Lunn
2012-07-20 17:35 ` [PATCH 4/16] ARM: Orion: Add arch support needed for I2C via DT Andrew Lunn
2012-07-20 17:35 ` [PATCH 5/16] Kirkwood: Add basic device tree support for QNAP TS219 Andrew Lunn
2012-07-20 17:35 ` [PATCH 6/16] ARM: Orion: DTify the watchdog timer Andrew Lunn
2012-07-20 17:35 ` [PATCH 7/16] ATA: sata_mv: Add device tree support Andrew Lunn
2012-07-20 17:35 ` [PATCH 8/16] ARM: Kirkwood: Use DT to configure SATA device Andrew Lunn
2012-07-20 17:35 ` [PATCH 9/16] ARM: Kirkwood: Describe DNS325 temperature sensor in DT Andrew Lunn
2012-07-20 17:35 ` [PATCH 10/16] ARM: Kirkwood: Describe IB62x0 gpio-keys " Andrew Lunn
2012-07-20 17:35 ` Andrew Lunn [this message]
2012-07-20 17:35 ` [PATCH 12/16] ARM: Kirkwood: Describe Dreamplug LEDs " Andrew Lunn
2012-07-20 17:35 ` [PATCH 13/16] ARM: Kirkwood: Describe GoFlex Net LEDs and SATA " Andrew Lunn
2012-07-20 17:35 ` [PATCH 14/16] ARM: Kirkwood: Describe ib62x0 LEDs " Andrew Lunn
2012-07-20 17:35 ` [PATCH 15/16] ARM: Kirkwood: Describe iConnect " Andrew Lunn
2012-07-30 21:35 ` Adam Baker
2012-07-31 6:36 ` Andrew Lunn
2012-07-31 7:08 ` Arnaud Patard (Rtp)
2012-07-31 7:20 ` Andrew Lunn
2012-07-31 8:59 ` Arnaud Patard (Rtp)
2012-07-20 17:35 ` [PATCH 16/16] ARM: Kirkwood: Replace mrvl with marvell Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342805751-18048-12-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).