From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/16] ARM: Orion: DTify the watchdog timer.
Date: Fri, 20 Jul 2012 19:35:41 +0200 [thread overview]
Message-ID: <1342805751-18048-7-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1342805751-18048-1-git-send-email-andrew@lunn.ch>
Add device tree support to the Orion watchdog timer, and enable its
use in the kirkwood devices using device tree.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
---
Documentation/devicetree/bindings/watchdog/marvel.txt | 14 ++++++++++++++
arch/arm/boot/dts/kirkwood.dtsi | 6 ++++++
arch/arm/mach-kirkwood/board-dt.c | 2 +-
drivers/watchdog/orion_wdt.c | 8 ++++++++
4 files changed, 29 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/marvel.txt
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
new file mode 100644
index 0000000..0b2503a
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -0,0 +1,14 @@
+* Marvell Orion Watchdog Time
+
+Required Properties:
+
+- Compatibility : "marvell,orion-wdt"
+- reg : Address of the timer registers
+
+Example:
+
+ wdt at 20300 {
+ compatible = "marvell,orion-wdt";
+ reg = <0x20300 0x28>;
+ status = "okay";
+ };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index e13d746..3e0e9b9 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -70,6 +70,12 @@
status = "disabled";
};
+ wdt at 20300 {
+ compatible = "marvell,orion-wdt";
+ reg = <0x20300 0x28>;
+ status = "okay";
+ };
+
nand at 3000000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index b7cd6d2..73e75cf 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -30,6 +30,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
NULL),
+ OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
{},
};
@@ -55,7 +56,6 @@ static void __init kirkwood_dt_init(void)
kirkwood_clk_init();
/* internal devices that every board has */
- kirkwood_wdt_init();
kirkwood_xor0_init();
kirkwood_xor1_init();
kirkwood_crypto_init();
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 0f57369..1531e02 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -25,6 +25,7 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/clk.h>
+#include <linux/of.h>
#include <mach/bridge-regs.h>
/*
@@ -295,6 +296,12 @@ static void orion_wdt_shutdown(struct platform_device *pdev)
orion_wdt_disable();
}
+static const struct of_device_id orion_wdt_of_match_table[] __devinitdata = {
+ { .compatible = "marvell,orion-wdt", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, orion_wdt_of_match_table);
+
static struct platform_driver orion_wdt_driver = {
.probe = orion_wdt_probe,
.remove = __devexit_p(orion_wdt_remove),
@@ -302,6 +309,7 @@ static struct platform_driver orion_wdt_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "orion_wdt",
+ .of_match_table = of_match_ptr(orion_wdt_of_match_table),
},
};
--
1.7.10
next prev parent reply other threads:[~2012-07-20 17:35 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-20 17:35 [PATCH 00/16] Orion DT conversions and fixes Andrew Lunn
2012-07-20 17:35 ` [PATCH 1/16] ARM: Orion: DT support for IRQ and GPIO Controllers Andrew Lunn
2012-07-20 17:35 ` [PATCH 2/16] SPI: Refactor spi-orion to use SPI framework queue Andrew Lunn
2012-07-22 7:22 ` Linus Walleij
2012-07-22 9:53 ` Andrew Lunn
2012-07-22 19:07 ` Mark Brown
2012-07-22 19:32 ` Andrew Lunn
2012-07-22 22:42 ` Mark Brown
2012-07-23 7:27 ` Andrew Lunn
2012-07-23 9:37 ` Mark Brown
2012-07-23 10:08 ` [PATCH] spi-orion: add device tree binding Andrew Lunn
2012-07-23 10:43 ` Mark Brown
2012-07-23 10:59 ` Andrew Lunn
2012-07-23 11:12 ` Mark Brown
2012-07-23 17:43 ` Arnd Bergmann
2012-07-23 10:44 ` Mark Brown
2012-07-23 10:50 ` Andrew Lunn
2012-07-23 10:16 ` [PATCH 2/16] SPI: Refactor spi-orion to use SPI framework queue Andrew Lunn
2012-07-23 10:23 ` Mark Brown
2012-07-23 10:49 ` Andrew Lunn
2012-07-23 11:11 ` Mark Brown
2012-07-23 10:53 ` Sergei Shtylyov
2012-07-23 11:02 ` Andrew Lunn
2012-07-20 17:35 ` [PATCH 3/16] ARM: Kirkwood: Ensure runit clock always ticks Andrew Lunn
2012-07-20 17:35 ` [PATCH 4/16] ARM: Orion: Add arch support needed for I2C via DT Andrew Lunn
2012-07-20 17:35 ` [PATCH 5/16] Kirkwood: Add basic device tree support for QNAP TS219 Andrew Lunn
2012-07-20 17:35 ` Andrew Lunn [this message]
2012-07-20 17:35 ` [PATCH 7/16] ATA: sata_mv: Add device tree support Andrew Lunn
2012-07-20 17:35 ` [PATCH 8/16] ARM: Kirkwood: Use DT to configure SATA device Andrew Lunn
2012-07-20 17:35 ` [PATCH 9/16] ARM: Kirkwood: Describe DNS325 temperature sensor in DT Andrew Lunn
2012-07-20 17:35 ` [PATCH 10/16] ARM: Kirkwood: Describe IB62x0 gpio-keys " Andrew Lunn
2012-07-20 17:35 ` [PATCH 11/16] ARM: Kirkwood: Describe iConnects temperature sensor " Andrew Lunn
2012-07-20 17:35 ` [PATCH 12/16] ARM: Kirkwood: Describe Dreamplug LEDs " Andrew Lunn
2012-07-20 17:35 ` [PATCH 13/16] ARM: Kirkwood: Describe GoFlex Net LEDs and SATA " Andrew Lunn
2012-07-20 17:35 ` [PATCH 14/16] ARM: Kirkwood: Describe ib62x0 LEDs " Andrew Lunn
2012-07-20 17:35 ` [PATCH 15/16] ARM: Kirkwood: Describe iConnect " Andrew Lunn
2012-07-30 21:35 ` Adam Baker
2012-07-31 6:36 ` Andrew Lunn
2012-07-31 7:08 ` Arnaud Patard (Rtp)
2012-07-31 7:20 ` Andrew Lunn
2012-07-31 8:59 ` Arnaud Patard (Rtp)
2012-07-20 17:35 ` [PATCH 16/16] ARM: Kirkwood: Replace mrvl with marvell Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342805751-18048-7-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).