From: cyril@ti.com (Cyril Chemparathy)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 08/23] ARM: LPAE: use 64-bit pgd physical address in switch_mm()
Date: Tue, 24 Jul 2012 01:10:10 -0000 [thread overview]
Message-ID: <1343092165-9470-9-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1343092165-9470-1-git-send-email-cyril@ti.com>
This patch modifies the switch_mm() processor functions to use 64-bit
addresses. We use u64 instead of phys_addr_t, in order to avoid having config
dependent register usage when calling into switch_mm assembly code.
The changes in this patch are primarily adjustments for registers used for
arguments to switch_mm. The few processor definitions that did use the second
argument have been modified accordingly.
Arguments and calling conventions aside, this patch should be a no-op on v6
and non-LPAE v7 processors. On LPAE systems, we now honor the upper 32-bits
of the physical address that is being passed in.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
---
arch/arm/include/asm/proc-fns.h | 4 ++--
arch/arm/mm/proc-v6.S | 2 +-
arch/arm/mm/proc-v7-2level.S | 2 +-
arch/arm/mm/proc-v7-3level.S | 5 +++--
4 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index f3628fb..fa6554e 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -60,7 +60,7 @@ extern struct processor {
/*
* Set the page table
*/
- void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+ void (*switch_mm)(u64 pgd_phys, struct mm_struct *mm);
/*
* Set a possibly extended PTE. Non-extended PTEs should
* ignore 'ext'.
@@ -82,7 +82,7 @@ extern void cpu_proc_init(void);
extern void cpu_proc_fin(void);
extern int cpu_do_idle(void);
extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_do_switch_mm(u64 pgd_phys, struct mm_struct *mm);
#ifdef CONFIG_ARM_LPAE
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
#else
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 5900cd5..566c658 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -100,8 +100,8 @@ ENTRY(cpu_v6_dcache_clean_area)
*/
ENTRY(cpu_v6_switch_mm)
#ifdef CONFIG_MMU
+ ldr r1, [r2, #MM_CONTEXT_ID] @ get mm->context.id
mov r2, #0
- ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index 42ac069..3397803 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -39,8 +39,8 @@
*/
ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
+ ldr r1, [r2, #MM_CONTEXT_ID] @ get mm->context.id
mov r2, #0
- ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
#ifdef CONFIG_ARM_ERRATA_430973
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index 8de0f1d..0001581 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -47,9 +47,10 @@
*/
ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
- ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
- and r3, r1, #0xff
+ ldr r2, [r2, #MM_CONTEXT_ID] @ get mm->context.id
+ and r3, r2, #0xff
mov r3, r3, lsl #(48 - 32) @ ASID
+ orr r3, r3, r1 @ upper 32-bits of pgd phys
mcrr p15, 0, r0, r3, c2 @ set TTB 0
isb
#endif
--
1.7.9.5
next prev parent reply other threads:[~2012-07-24 1:10 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-24 1:09 [RFC 00/23] Introducing the TI Keystone platform Cyril Chemparathy
2012-07-24 1:09 ` [RFC 01/23] ARM: LPAE: disable phys-to-virt patching on PAE systems Cyril Chemparathy
2012-07-24 9:41 ` Catalin Marinas
2012-07-24 10:43 ` Cyril Chemparathy
2012-07-24 1:09 ` [RFC 05/23] ARM: LPAE: use phys_addr_t in free_memmap() Cyril Chemparathy
2012-07-24 1:09 ` [RFC 02/23] ARM: LPAE: use signed arithmetic for mask definitions Cyril Chemparathy
2012-07-24 10:05 ` Catalin Marinas
2012-07-24 10:52 ` Cyril Chemparathy
2012-07-31 15:35 ` Cyril Chemparathy
2012-07-24 1:10 ` [RFC 04/23] ARM: LPAE: use phys_addr_t in alloc_init_pud() Cyril Chemparathy
2012-07-24 1:10 ` Cyril Chemparathy [this message]
2012-07-24 1:10 ` [RFC 11/23] ARM: mm: cleanup checks for membank overlap with vmalloc area Cyril Chemparathy
2012-07-24 1:10 ` [RFC 16/23] ARM: LPAE: accomodate >32-bit addresses for page table base Cyril Chemparathy
2012-07-24 1:10 ` [RFC 07/23] ARM: LPAE: use phys_addr_t for membank size Cyril Chemparathy
2012-07-24 10:04 ` Will Deacon
2012-07-24 10:46 ` Cyril Chemparathy
2012-07-24 1:10 ` [RFC 20/23] mm: bootmem: use phys_addr_t for physical addresses Cyril Chemparathy
2012-07-24 1:10 ` [RFC 12/23] ARM: mm: clean up membank size limit checks Cyril Chemparathy
2012-07-24 1:10 ` [RFC 17/23] ARM: add machine desc hook for early memory/paging initialization Cyril Chemparathy
2012-07-24 14:32 ` Arnd Bergmann
2012-07-24 14:47 ` Cyril Chemparathy
2012-07-24 1:10 ` [RFC 09/23] ARM: LPAE: use 64-bit accessors for TTBR registers Cyril Chemparathy
2012-07-24 1:10 ` [RFC 18/23] ARM: add virt_to_idmap for interconnect aliasing Cyril Chemparathy
2012-07-24 1:10 ` [RFC 03/23] ARM: LPAE: use phys_addr_t on virt <--> phys conversion Cyril Chemparathy
2012-07-24 10:37 ` Catalin Marinas
2012-07-24 10:55 ` Cyril Chemparathy
2012-07-24 11:02 ` Catalin Marinas
2012-07-24 1:10 ` [RFC 13/23] ARM: LPAE: define ARCH_LOW_ADDRESS_LIMIT for bootmem Cyril Chemparathy
2012-07-24 1:10 ` [RFC 10/23] ARM: mm: use physical addresses in highmem sanity checks Cyril Chemparathy
2012-07-24 1:10 ` [RFC 22/23] ARM: keystone: enable SMP on Keystone machines Cyril Chemparathy
2012-07-24 1:10 ` [RFC 15/23] ARM: LPAE: allow proc override of TTB setup Cyril Chemparathy
2012-07-24 1:33 ` [RFC 23/23] ARM: keystone: add switch over to high physical address range Cyril Chemparathy
2012-07-24 9:49 ` Catalin Marinas
2012-07-24 14:39 ` Arnd Bergmann
2012-07-24 14:59 ` Cyril Chemparathy
2012-07-24 1:33 ` [RFC 06/23] ARM: LPAE: use phys_addr_t for initrd location and size Cyril Chemparathy
2012-07-24 1:38 ` [RFC 19/23] drivers: cma: fix addressing on PAE machines Cyril Chemparathy
2012-07-24 1:38 ` [RFC 21/23] ARM: keystone: introducing TI Keystone platform Cyril Chemparathy
2012-07-24 14:46 ` Arnd Bergmann
2012-07-24 17:56 ` Cyril Chemparathy
2012-07-24 18:45 ` Arnd Bergmann
2012-07-24 1:38 ` [RFC 14/23] ARM: LPAE: factor out T1SZ and TTBR1 computations Cyril Chemparathy
2012-07-24 9:08 ` [RFC 00/23] Introducing the TI Keystone platform Will Deacon
2012-07-24 10:41 ` Cyril Chemparathy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343092165-9470-9-git-send-email-cyril@ti.com \
--to=cyril@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).