From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] MMC: pxa-mci: add DT bindings
Date: Wed, 25 Jul 2012 18:17:41 +0200 [thread overview]
Message-ID: <1343233066-15397-3-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1343233066-15397-1-git-send-email-zonque@gmail.com>
Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Chris Ball <cjb@laptop.org>
---
Documentation/devicetree/bindings/mmc/pxa-mmc.txt | 24 ++++++++++
drivers/mmc/host/pxamci.c | 50 +++++++++++++++++++++
2 files changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/pxa-mmc.txt
diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt
new file mode 100644
index 0000000..8f0ea58
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt
@@ -0,0 +1,24 @@
+* PXA MMC drivers
+
+Driver bindings for the PXA MCI (MMC/SDIO) interfaces
+
+Required properties:
+- compatible: Should be "mrvl,pxa-mmc".
+- reg: Should contain registers location and length
+- interrupts: Should contain the interrupt
+- vmmc-supply: A regulator for VMMC
+
+Optional properties:
+- mrvl,detect-delay-ms: sets the detection delay timeout in ms.
+- mrvl,gpio-card-detect: GPIO spec for the card detect pin
+- mrvl,gpio-card-readonly: GPIO spec for the card write protection pin
+- mrvl,gpio-power: GPIO spec for the card power enable pin
+
+Examples:
+
+mmc0: mmc at 41100000 {
+ compatible = "mrvl,pxa-mmc";
+ reg = <0x41100000 0x1000>;
+ interrupts = <23>;
+};
+
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index cb2dc0e..39ddc00 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -30,6 +30,9 @@
#include <linux/regulator/consumer.h>
#include <linux/gpio.h>
#include <linux/gfp.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
#include <asm/sizes.h>
@@ -573,6 +576,48 @@ static irqreturn_t pxamci_detect_irq(int irq, void *devid)
return IRQ_HANDLED;
}
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_mmc_dt_ids[] = {
+ { .compatible = "mrvl,pxa-mmc" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
+
+static int __devinit pxamci_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct pxamci_platform_data *pdata;
+ u32 tmp;
+
+ if (!np)
+ return 0;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->gpio_card_detect =
+ of_get_named_gpio(np, "pxa-mmc,gpio-card-detect", 0);
+ pdata->gpio_card_ro =
+ of_get_named_gpio(np, "pxa-mmc,gpio-card-readonly", 0);
+ pdata->gpio_power =
+ of_get_named_gpio(np, "pxa-mmc,gpio-power", 0);
+
+ if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
+ pdata->detect_delay_ms = tmp;
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+#else
+static int __devinit pxamci_of_init(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
static int pxamci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
@@ -580,6 +625,10 @@ static int pxamci_probe(struct platform_device *pdev)
struct resource *r, *dmarx, *dmatx;
int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
+ ret = pxamci_of_init(pdev);
+ if (ret)
+ return ret;
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!r || irq < 0)
@@ -866,6 +915,7 @@ static struct platform_driver pxamci_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pxa_mmc_dt_ids),
#ifdef CONFIG_PM
.pm = &pxamci_pm_ops,
#endif
--
1.7.10.4
next prev parent reply other threads:[~2012-07-25 16:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-25 16:17 [PATCH 0/7] Assorted PXA3xx DT patches Daniel Mack
2012-07-25 16:17 ` [PATCH 1/7] RTC: add DT bindings to pxa-rtc Daniel Mack
2012-07-25 17:18 ` Arnd Bergmann
2012-07-26 12:51 ` Sergei Shtylyov
2012-07-25 16:17 ` Daniel Mack [this message]
2012-07-25 16:47 ` [PATCH 2/7] MMC: pxa-mci: add DT bindings Chris Ball
2012-07-25 19:09 ` Daniel Mack
2012-07-25 16:17 ` [PATCH 3/7] MTD: pxa3xx-nand: add devicetree bindings Daniel Mack
2012-07-26 0:59 ` Marek Vasut
2012-07-26 6:30 ` Arnd Bergmann
2012-07-26 6:53 ` Daniel Mack
2012-07-26 6:33 ` Daniel Mack
2012-07-25 16:17 ` [PATCH 4/7] ARM: pxa: add devicetree code for irq handling Daniel Mack
2012-07-25 16:17 ` [PATCH 5/7] ARM: pxa3xx: skip default device initialization when booting via DT Daniel Mack
2012-07-25 16:17 ` [PATCH 6/7] ARM: pxa3xx: add generic DT machine code Daniel Mack
2012-07-25 17:34 ` Arnd Bergmann
2012-07-25 18:07 ` Daniel Mack
2012-07-25 19:04 ` Arnd Bergmann
2012-07-25 16:17 ` [PATCH 7/7] ARM: pxa: add .dtsi files Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343233066-15397-3-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).