From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Fri, 27 Jul 2012 13:45:59 +0100 Subject: [PATCH 15/18] ARM: ux500: Add MSP devices to DB8500 Device Tree In-Reply-To: <1343393162-11938-1-git-send-email-lee.jones@linaro.org> References: <1343393162-11938-1-git-send-email-lee.jones@linaro.org> Message-ID: <1343393162-11938-16-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org List all four MSP devices which exist on all DB8500 based platforms, to ensure correct device probing and configuration passing when booting with DT. Signed-off-by: Lee Jones --- arch/arm/boot/dts/db8500.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index a3fb05f..b9d4405 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -595,6 +595,36 @@ compatible = "stericsson,ux500-pcm"; }; + msp0: msp at 80123000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80123000 0x1000>; + interrupts = <0 31 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + msp1: msp at 80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + stericcson,use-pinctrl; + }; + + // HDMI sound + msp2: msp at 80117000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80117000 0x1000>; + interrupts = <0 98 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + msp3: msp at 80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + external-bus at 50000000 { compatible = "simple-bus"; reg = <0x50000000 0x4000000>; -- 1.7.9.5