linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/9] MMC: pxa-mci: add DT bindings
Date: Sat, 28 Jul 2012 12:07:34 +0200	[thread overview]
Message-ID: <1343470061-16879-3-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1343470061-16879-1-git-send-email-zonque@gmail.com>

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Chris Ball <cjb@laptop.org>
---
 Documentation/devicetree/bindings/mmc/pxa-mmc.txt | 25 +++++++++++
 drivers/mmc/host/pxamci.c                         | 52 +++++++++++++++++++++++
 2 files changed, 77 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/pxa-mmc.txt

diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt
new file mode 100644
index 0000000..b7025de
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt
@@ -0,0 +1,25 @@
+* PXA MMC drivers
+
+Driver bindings for the PXA MCI (MMC/SDIO) interfaces
+
+Required properties:
+- compatible: Should be "marvell,pxa-mmc".
+- vmmc-supply: A regulator for VMMC
+
+Optional properties:
+- marvell,detect-delay-ms: sets the detection delay timeout in ms.
+- marvell,gpio-power: GPIO spec for the card power enable pin
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the pxa-mmc driver.
+
+Examples:
+
+mmc0: mmc at 41100000 {
+	compatible = "marvell,pxa-mmc";
+	reg = <0x41100000 0x1000>;
+	interrupts = <23>;
+	cd-gpios = <&gpio 23 0>;
+	wp-gpios = <&gpio 24 0>;
+};
+
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index cb2dc0e..11df800 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -30,6 +30,9 @@
 #include <linux/regulator/consumer.h>
 #include <linux/gpio.h>
 #include <linux/gfp.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
 
 #include <asm/sizes.h>
 
@@ -573,6 +576,50 @@ static irqreturn_t pxamci_detect_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_mmc_dt_ids[] = {
+        { .compatible = "marvell,pxa-mmc" },
+        { }
+};
+
+MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
+
+static int __devinit pxamci_of_init(struct platform_device *pdev)
+{
+        struct device_node *np = pdev->dev.of_node;
+        struct pxamci_platform_data *pdata;
+        u32 tmp;
+
+        if (!np)
+                return 0;
+
+        pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+        if (!pdata)
+                return -ENOMEM;
+
+	pdata->gpio_card_detect =
+		of_get_named_gpio(np, "cd-gpios", 0);
+	pdata->gpio_card_ro =
+		of_get_named_gpio(np, "wp-gpios", 0);
+
+	/* pxa-mmc specific */
+	pdata->gpio_power =
+		of_get_named_gpio(np, "pxa-mmc,gpio-power", 0);
+
+	if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
+		pdata->detect_delay_ms = tmp;
+
+        pdev->dev.platform_data = pdata;
+
+        return 0;
+}
+#else
+static int __devinit pxamci_of_init(struct platform_device *pdev)
+{
+        return 0;
+}
+#endif
+
 static int pxamci_probe(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
@@ -580,6 +627,10 @@ static int pxamci_probe(struct platform_device *pdev)
 	struct resource *r, *dmarx, *dmatx;
 	int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
 
+	ret = pxamci_of_init(pdev);
+	if (ret)
+		return ret;
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
 	if (!r || irq < 0)
@@ -866,6 +917,7 @@ static struct platform_driver pxamci_driver = {
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(pxa_mmc_dt_ids),
 #ifdef CONFIG_PM
 		.pm	= &pxamci_pm_ops,
 #endif
-- 
1.7.11.2

  parent reply	other threads:[~2012-07-28 10:07 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-28 10:07 [PATCH v3 0/9] Assorted PXA3xx DT patches Daniel Mack
2012-07-28 10:07 ` [PATCH v3 1/9] RTC: add DT bindings to pxa-rtc Daniel Mack
2012-07-28 10:07 ` Daniel Mack [this message]
2012-08-03 23:52   ` [PATCH v3 2/9] MMC: pxa-mci: add DT bindings Chris Ball
2012-08-04  1:30     ` Haojian Zhuang
2012-07-28 10:07 ` [PATCH v3 3/9] MTD: pxa3xx-nand: add devicetree bindings Daniel Mack
2012-07-28 10:07 ` [PATCH v3 4/9] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip() Daniel Mack
2012-08-05  0:12   ` Linus Walleij
2012-08-05  2:56     ` Haojian Zhuang
2012-08-05  9:37       ` Linus Walleij
2012-08-06  8:09         ` Arnd Bergmann
2012-08-06  8:11           ` Daniel Mack
2012-07-28 10:07 ` [PATCH v3 5/9] GPIO: gpio-pxa: fix devicetree functions Daniel Mack
2012-08-04 23:40   ` Linus Walleij
2012-08-05  2:58     ` Haojian Zhuang
2012-07-28 10:07 ` [PATCH v3 6/9] ARM: pxa: add devicetree code for irq handling Daniel Mack
2012-07-28 10:07 ` [PATCH v3 7/9] ARM: pxa3xx: skip default device initialization when booting via DT Daniel Mack
2012-07-28 10:07 ` [PATCH v3 8/9] ARM: pxa3xx: add generic DT machine code Daniel Mack
2012-07-28 10:07 ` [PATCH v3 9/9] ARM: pxa: add .dtsi files Daniel Mack
2012-07-28 18:42   ` Amar Nath
2012-07-29  0:02     ` Daniel Mack
2012-07-29 19:05   ` Daniel Mack
2012-07-29 13:04 ` [PATCH v3 0/9] Assorted PXA3xx DT patches Arnd Bergmann
2012-07-30 14:01   ` Haojian Zhuang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1343470061-16879-3-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).