From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/9] GPIO: gpio-pxa: fix devicetree functions
Date: Sat, 28 Jul 2012 12:07:37 +0200 [thread overview]
Message-ID: <1343470061-16879-6-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1343470061-16879-1-git-send-email-zonque@gmail.com>
Provide an of_xlate function for the PXA GPIO chips and make it work for
devicetree environments.
Successfully tested on a PXA3xx board.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/gpio/gpio-pxa.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 6d0cb9d..f47e6b3 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -63,6 +63,7 @@ static int irq_base;
#ifdef CONFIG_OF
static struct irq_domain *domain;
+static struct device_node *pxa_gpio_of_node;
#endif
struct pxa_gpio_chip {
@@ -229,6 +230,24 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
(value ? GPSR_OFFSET : GPCR_OFFSET));
}
+#ifdef CONFIG_OF_GPIO
+static int pxa_gpio_of_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec,
+ u32 *flags)
+{
+ if (gpiospec->args[0] > pxa_last_gpio)
+ return -EINVAL;
+
+ if (gc != &pxa_gpio_chips[gpiospec->args[0] / 32].chip)
+ return -EINVAL;
+
+ if (flags)
+ *flags = gpiospec->args[1];
+
+ return gpiospec->args[0] % 32;
+}
+#endif
+
static int __devinit pxa_init_gpio_chip(int gpio_end,
int (*set_wake)(unsigned int, unsigned int))
{
@@ -256,6 +275,11 @@ static int __devinit pxa_init_gpio_chip(int gpio_end,
c->get = pxa_gpio_get;
c->set = pxa_gpio_set;
c->to_irq = pxa_gpio_to_irq;
+#ifdef CONFIG_OF_GPIO
+ c->of_node = pxa_gpio_of_node;
+ c->of_xlate = pxa_gpio_of_xlate;
+ c->of_gpio_n_cells = 2;
+#endif
/* number of GPIOs on last bank may be less than 32 */
c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
@@ -457,6 +481,7 @@ static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq,
const struct irq_domain_ops pxa_irq_domain_ops = {
.map = pxa_irq_domain_map,
+ .xlate = irq_domain_xlate_twocell,
};
#ifdef CONFIG_OF
@@ -497,6 +522,7 @@ static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev)
}
domain = irq_domain_add_legacy(np, nr_gpios, irq_base, 0,
&pxa_irq_domain_ops, NULL);
+ pxa_gpio_of_node = np;
return 0;
err:
iounmap(gpio_reg_base);
--
1.7.11.2
next prev parent reply other threads:[~2012-07-28 10:07 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-28 10:07 [PATCH v3 0/9] Assorted PXA3xx DT patches Daniel Mack
2012-07-28 10:07 ` [PATCH v3 1/9] RTC: add DT bindings to pxa-rtc Daniel Mack
2012-07-28 10:07 ` [PATCH v3 2/9] MMC: pxa-mci: add DT bindings Daniel Mack
2012-08-03 23:52 ` Chris Ball
2012-08-04 1:30 ` Haojian Zhuang
2012-07-28 10:07 ` [PATCH v3 3/9] MTD: pxa3xx-nand: add devicetree bindings Daniel Mack
2012-07-28 10:07 ` [PATCH v3 4/9] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip() Daniel Mack
2012-08-05 0:12 ` Linus Walleij
2012-08-05 2:56 ` Haojian Zhuang
2012-08-05 9:37 ` Linus Walleij
2012-08-06 8:09 ` Arnd Bergmann
2012-08-06 8:11 ` Daniel Mack
2012-07-28 10:07 ` Daniel Mack [this message]
2012-08-04 23:40 ` [PATCH v3 5/9] GPIO: gpio-pxa: fix devicetree functions Linus Walleij
2012-08-05 2:58 ` Haojian Zhuang
2012-07-28 10:07 ` [PATCH v3 6/9] ARM: pxa: add devicetree code for irq handling Daniel Mack
2012-07-28 10:07 ` [PATCH v3 7/9] ARM: pxa3xx: skip default device initialization when booting via DT Daniel Mack
2012-07-28 10:07 ` [PATCH v3 8/9] ARM: pxa3xx: add generic DT machine code Daniel Mack
2012-07-28 10:07 ` [PATCH v3 9/9] ARM: pxa: add .dtsi files Daniel Mack
2012-07-28 18:42 ` Amar Nath
2012-07-29 0:02 ` Daniel Mack
2012-07-29 19:05 ` Daniel Mack
2012-07-29 13:04 ` [PATCH v3 0/9] Assorted PXA3xx DT patches Arnd Bergmann
2012-07-30 14:01 ` Haojian Zhuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343470061-16879-6-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).