From: ian.molton@codethink.co.uk (Ian Molton)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] mv643xx Ethernet DT support and CSB1724 board support.
Date: Mon, 30 Jul 2012 16:15:53 +0100 [thread overview]
Message-ID: <1343661359-10150-1-git-send-email-ian.molton@codethink.co.uk> (raw)
This patch series adds support for the CSB1724 SoM by Cogent.
It also provides mv643xx DT support, and the CSB1724 was my test platform
for this support.
The mv643xx driver needs a LOT more TLC, but this should be a pretty
non-invasive way to get started on it.
The CSB1724 SoM platform support is ready-to-go. Supported so far is
SATA, Ethernet, and Serial.
SATA is built upon Thomas' work.
Ian Molton (6):
Initial csb1724 board support (FDT)
mv643xx.c: Remove magic numbers.
mv643xx.c: Add basic device tree support.
kirkwood: setup clock only in eth helpers.
csb1724: Enable device tree based mv643xx ethernet support.
DT: Convert all kirkwood boards with mv643xx that use DT
arch/arm/boot/dts/kirkwood-csb1724.dts | 55 ++++++++++++++
arch/arm/boot/dts/kirkwood-dnskw.dtsi | 12 +++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 24 ++++++
arch/arm/boot/dts/kirkwood-goflexnet.dts | 11 +++
arch/arm/boot/dts/kirkwood-ib62x0.dts | 13 ++++
arch/arm/boot/dts/kirkwood-iconnect.dts | 13 ++++
arch/arm/boot/dts/kirkwood-lsxl.dtsi | 23 ++++++
arch/arm/boot/dts/kirkwood-ts219-6281.dts | 11 ++-
arch/arm/boot/dts/kirkwood-ts219-6282.dts | 11 ++-
arch/arm/boot/dts/kirkwood-ts219.dtsi | 3 +
arch/arm/boot/dts/kirkwood.dtsi | 16 ++++
arch/arm/configs/csb1724_defconfig | 92 ++++++++++++++++++++++
arch/arm/mach-kirkwood/Kconfig | 7 ++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/Makefile.boot | 1 +
arch/arm/mach-kirkwood/board-csb1724.c | 62 +++++++++++++++
arch/arm/mach-kirkwood/board-dnskw.c | 7 +-
arch/arm/mach-kirkwood/board-dreamplug.c | 13 +---
arch/arm/mach-kirkwood/board-dt.c | 4 +
arch/arm/mach-kirkwood/board-goflexnet.c | 7 +-
arch/arm/mach-kirkwood/board-ib62x0.c | 7 +-
arch/arm/mach-kirkwood/board-iconnect.c | 7 +-
arch/arm/mach-kirkwood/board-lsxl.c | 13 +---
arch/arm/mach-kirkwood/board-ts219.c | 10 +--
arch/arm/mach-kirkwood/common.c | 6 +-
arch/arm/mach-kirkwood/common.h | 6 ++
drivers/net/ethernet/marvell/mv643xx_eth.c | 114 ++++++++++++++++++++++++----
27 files changed, 475 insertions(+), 74 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-csb1724.dts
create mode 100644 arch/arm/configs/csb1724_defconfig
create mode 100644 arch/arm/mach-kirkwood/board-csb1724.c
--
1.7.9.5
next reply other threads:[~2012-07-30 15:15 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-30 15:15 Ian Molton [this message]
2012-07-30 15:15 ` [PATCH 1/6] Initial csb1724 board support (FDT) Ian Molton
2012-07-30 15:28 ` Andrew Lunn
2012-07-30 16:28 ` Ian Molton
2012-07-31 11:27 ` Arnd Bergmann
2012-07-30 15:15 ` [PATCH 2/6] mv643xx.c: Remove magic numbers Ian Molton
2012-07-30 15:15 ` [PATCH 3/6] mv643xx.c: Add basic device tree support Ian Molton
2012-07-30 15:39 ` Andrew Lunn
2012-07-30 16:49 ` Ian Molton
2012-07-30 16:19 ` Amar Nath
2012-07-30 16:32 ` Ian Molton
2012-07-31 15:12 ` Florian Fainelli
2012-07-31 7:14 ` Arnaud Patard (Rtp)
2012-07-31 8:19 ` Ian Molton
2012-07-31 8:27 ` Andrew Lunn
2012-07-31 8:45 ` Ian Molton
2012-07-31 8:58 ` Arnaud Patard (Rtp)
2012-07-31 9:14 ` Ian Molton
2012-07-31 14:30 ` Ben Dooks
2012-07-31 15:04 ` Arnaud Patard (Rtp)
2012-07-30 15:15 ` [PATCH 4/6] kirkwood: setup clock only in eth helpers Ian Molton
2012-07-30 16:12 ` Andrew Lunn
2012-07-30 16:52 ` Ian Molton
2012-07-30 19:10 ` Andrew Lunn
2012-07-30 16:46 ` Josh Coombs
2012-07-31 8:23 ` Ian Molton
2012-07-31 11:04 ` Ian Molton
2012-07-31 11:08 ` Andrew Lunn
2012-07-31 11:39 ` Ian Molton
2012-07-30 15:15 ` [PATCH 5/6] csb1724: Enable device tree based mv643xx ethernet support Ian Molton
2012-07-30 15:55 ` Andrew Lunn
2012-07-30 16:58 ` Ian Molton
2012-07-30 16:17 ` Andrew Lunn
2012-07-30 16:57 ` Ian Molton
2012-07-30 15:15 ` [PATCH 6/6] DT: Convert all kirkwood boards with mv643xx that use DT Ian Molton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343661359-10150-1-git-send-email-ian.molton@codethink.co.uk \
--to=ian.molton@codethink.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).