linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: anton.vorontsov@linaro.org (Anton Vorontsov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/9] ARM: FIQ: Remove FIQ_START
Date: Sun,  5 Aug 2012 16:03:36 -0700	[thread overview]
Message-ID: <1344207819-3415-6-git-send-email-anton.vorontsov@linaro.org> (raw)
In-Reply-To: <20120805230238.GA1663@lizard>

RPC:

 FIQ_START is irrelevant nowadays, the arch uses platform-specific
 iomd_{,un}mask_fiq() calls.

OMAP1:

 The only user of FIQs is MACH_AMS_DELTA, and in particular its
 drivers/input/serio/ams_delta_serio.c driver. The driver does not rely
 on the FIQ interrupts directly, instead it uses a "deffered fiq"
 interrupt (raised after a buffer filled by the FIQ routine).

 The FIQ handling routines are not using disable_fiq() or enable_fiq()
 stuff, so it currently does not use FIQ_START at all -- the asm code
 uses OMAP_IH1_BASE and twiddles the bits itself.

S3C:

 The only user of FIQs on s3c24xx is spi-s3c24xx driver. The driver
 works with interrupt controller directly (via S3C24XX_VA_IRQ base
 address), and does not use IRQ subsystem to mask/unmask IRQs.

MXC:

 Users now use enable/disable_irq() routines. The drivers rely on a
 correctly passed VIRQ cookie anyway, so FIQ_START becomes irrelevant.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
---
 arch/arm/include/asm/mach/irq.h           |    2 +-
 arch/arm/kernel/fiq.c                     |    2 +-
 arch/arm/mach-rpc/include/mach/irqs.h     |    5 -----
 arch/arm/mach-rpc/irq.c                   |    2 +-
 arch/arm/mach-s3c24xx/include/mach/irqs.h |    3 ---
 arch/arm/plat-mxc/avic.c                  |    2 +-
 arch/arm/plat-mxc/include/mach/irqs.h     |    2 --
 arch/arm/plat-mxc/tzic.c                  |    2 +-
 arch/arm/plat-omap/include/plat/irqs.h    |    4 ----
 arch/arm/plat-s3c24xx/irq.c               |    2 +-
 10 files changed, 6 insertions(+), 20 deletions(-)

diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 15cb035..febe495 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -17,7 +17,7 @@ struct seq_file;
 /*
  * This is internal.  Do not use it.
  */
-extern void init_FIQ(int);
+extern void init_FIQ(void);
 extern int show_fiq_list(struct seq_file *, int);
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 29b93b8..bd369c5 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -128,7 +128,7 @@ EXPORT_SYMBOL(__get_fiq_regs);	/* defined in fiqasm.S */
 EXPORT_SYMBOL(claim_fiq);
 EXPORT_SYMBOL(release_fiq);
 
-void __init init_FIQ(int start)
+void __init init_FIQ(void)
 {
 	no_fiq_insn = *(unsigned long *)0xffff001c;
 }
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
index f27ead1..2536543 100644
--- a/arch/arm/mach-rpc/include/mach/irqs.h
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -42,9 +42,4 @@ extern void iomd_mask_fiq(int fiq);
 extern void iomd_unmask_fiq(int fiq);
 #endif
 
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
 #define NR_IRQS			128
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index a4221b3..07770c8 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -152,6 +152,6 @@ void __init rpc_init_irq(void)
 		}
 	}
 
-	init_FIQ(FIQ_START);
+	init_FIQ();
 }
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
index b7a9f4d..7d66d41 100644
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
@@ -209,7 +209,4 @@
 #define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
 #endif
 
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START		IRQ_EINT0
-
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index cbd55c3..19701ec 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -218,7 +218,7 @@ void __init mxc_init_irq(void __iomem *irqbase)
 
 #ifdef CONFIG_FIQ
 	/* Initialize FIQ */
-	init_FIQ(FIQ_START);
+	init_FIQ();
 #endif
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index d73f5e8..2ec942f 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -13,8 +13,6 @@
 
 extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
-/* all normal IRQs can be FIQs */
-#define FIQ_START	0
 /* switch between IRQ and FIQ */
 extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
 
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 3ed1adb..d09b573 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -193,7 +193,7 @@ void __init tzic_init_irq(void __iomem *irqbase)
 
 #ifdef CONFIG_FIQ
 	/* Initialize FIQ */
-	init_FIQ(FIQ_START);
+	init_FIQ();
 #endif
 
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 37bbbbb..d2b91e3c 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -446,8 +446,4 @@
 
 #include <mach/hardware.h>
 
-#ifdef CONFIG_FIQ
-#define FIQ_START		1024
-#endif
-
 #endif
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index e4e9567..e0de92a 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -533,7 +533,7 @@ void __init s3c24xx_init_irq(void)
 	int i;
 
 #ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
+	init_FIQ();
 #endif
 
 	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-- 
1.7.10.4

  parent reply	other threads:[~2012-08-05 23:03 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-05 23:02 [PATCH 0/9] Get rid of FIQ_START/enable/disable_fiq() + some FIQ cleanups Anton Vorontsov
2012-08-05 23:03 ` [PATCH 1/9] ARM: mach-rpc: Don't register FIQs with genirq Anton Vorontsov
2012-08-05 23:03 ` [PATCH 2/9] ARM: plat-s3c24xx: Don't use FIQ_START Anton Vorontsov
2012-08-08 10:47   ` Kukjin Kim
2012-08-08 11:00     ` Anton Vorontsov
2012-08-05 23:03 ` [PATCH 3/9] [media] mx1_camera: Don't use {en,dis}able_fiq() calls Anton Vorontsov
2012-08-08  6:57   ` Sascha Hauer
2012-08-05 23:03 ` [PATCH 4/9] ASoC: imx: " Anton Vorontsov
2012-08-06 15:19   ` Matt Sealey
2012-08-06 15:49     ` Mark Brown
2012-08-06 18:09       ` Matt Sealey
2012-08-06 19:37         ` Mark Brown
2012-08-06 20:16           ` Robert Schwebel
2012-08-06 20:39             ` Matt Sealey
2012-08-06 21:41               ` Mark Brown
2012-08-06 23:26                 ` Matt Sealey
2012-08-07  6:35                 ` Sascha Hauer
2012-08-07 16:50                   ` Mark Brown
2012-08-07  2:09               ` Shawn Guo
2012-08-07 16:48     ` Dave Martin
2012-08-08  6:57   ` Sascha Hauer
2012-08-05 23:03 ` [PATCH 5/9] ARM: FIQ: Remove enable_fiq() and disable_fiq() calls Anton Vorontsov
2012-08-05 23:03 ` Anton Vorontsov [this message]
2012-08-05 23:03 ` [PATCH 7/9] ARM: FIQ: Should include asm/mach/irq.h Anton Vorontsov
2012-08-05 23:03 ` [PATCH 8/9] ARM: FIQ: Implement !CONFIG_FIQ stubs Anton Vorontsov
2012-08-05 23:03 ` [PATCH 9/9] ARM: FIQ: Make show_fiq_list() return void Anton Vorontsov
2012-08-26  4:24 ` [PATCH 0/9] Get rid of FIQ_START/enable/disable_fiq() + some FIQ cleanups Anton Vorontsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1344207819-3415-6-git-send-email-anton.vorontsov@linaro.org \
    --to=anton.vorontsov@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).