From: broonie@opensource.wolfsonmicro.com (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore
Date: Thu, 9 Aug 2012 19:05:48 +0100 [thread overview]
Message-ID: <1344535549-4371-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
SPI is also connected on the board, use that instead of I2C as it's much
faster. Also define platform data now the core driver is in mainline.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 35 ++++++++++++++++++++++----
1 file changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index f81f089..22dd77b 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -192,9 +192,33 @@ static const struct i2c_board_info wm1277_devs[] = {
},
};
-static const struct i2c_board_info wm5102_devs[] = {
- { I2C_BOARD_INFO("wm5102", 0x1a),
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
+static struct arizona_pdata wm5102_pdata = {
+ .ldoena = S3C64XX_GPN(7),
+ .gpio_base = CODEC_GPIO_BASE,
+ .irq_active_high = true,
+ .micd_pol_gpio = CODEC_GPIO_BASE + 4,
+ .gpio_defaults = {
+ [2] = 0x10000, /* AIF3TXLRCLK */
+ [3] = 0x4, /* OPCLK */
+ },
+};
+
+static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = {
+ .line = S3C64XX_GPN(5),
+};
+
+static struct spi_board_info wm5102_spi_devs[] = {
+ [0] = {
+ .modalias = "wm5102",
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE +
+ WM831X_IRQ_GPIO_2,
+ .controller_data = &wm5102_spi_csinfo,
+ .platform_data = &wm5102_pdata,
+ },
};
static const struct i2c_board_info wm6230_i2c_devs[] = {
@@ -234,8 +258,9 @@ static __devinitdata const struct {
{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
{ .id = 0x3d, .name = "1277-EV1 Littlemill",
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
- { .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
- .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
+ { .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut",
+ .spi_devs = wm5102_spi_devs,
+ .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },
};
static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
--
1.7.10.4
next reply other threads:[~2012-08-09 18:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-09 18:05 Mark Brown [this message]
2012-08-09 18:05 ` [PATCH 2/2] ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore Mark Brown
2012-08-10 4:56 ` [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module " Kukjin Kim
2012-08-10 10:07 ` Mark Brown
2012-08-11 5:08 ` Kukjin Kim
2012-08-13 12:24 ` Mark Brown
2012-08-23 9:45 ` Kukjin Kim
2012-08-23 15:20 ` Mark Brown
2012-08-28 23:30 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344535549-4371-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).