From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] pinctrl: imx51: fix .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI
Date: Mon, 13 Aug 2012 22:18:52 +0800 [thread overview]
Message-ID: <1344867532-27068-1-git-send-email-shawn.guo@linaro.org> (raw)
The .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI should be 0x7bc rather
than NO_PAD. This error will cause SD2 probe failure.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
Hi Linus,
Please send this fix for -rc, so that my imx51 pinctrl series can get
a fixed base.
Regards,
Shawn
drivers/pinctrl/pinctrl-imx51.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-imx51.c b/drivers/pinctrl/pinctrl-imx51.c
index 689b3c8..9fd0216 100644
--- a/drivers/pinctrl/pinctrl-imx51.c
+++ b/drivers/pinctrl/pinctrl-imx51.c
@@ -974,7 +974,7 @@ static struct imx_pin_reg imx51_pin_regs[] = {
IMX_PIN_REG(MX51_PAD_EIM_DA13, NO_PAD, 0x050, 0, 0x000, 0), /* MX51_PAD_EIM_DA13__EIM_DA13 */
IMX_PIN_REG(MX51_PAD_EIM_DA14, NO_PAD, 0x054, 0, 0x000, 0), /* MX51_PAD_EIM_DA14__EIM_DA14 */
IMX_PIN_REG(MX51_PAD_EIM_DA15, NO_PAD, 0x058, 0, 0x000, 0), /* MX51_PAD_EIM_DA15__EIM_DA15 */
- IMX_PIN_REG(MX51_PAD_SD2_CMD, NO_PAD, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */
+ IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */
IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 1, 0x9b0, 2), /* MX51_PAD_SD2_CMD__I2C1_SCL */
IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 0, 0x000, 0), /* MX51_PAD_SD2_CMD__SD2_CMD */
IMX_PIN_REG(MX51_PAD_SD2_CLK, 0x7c0, 0x3b8, 2, 0x914, 3), /* MX51_PAD_SD2_CLK__CSPI_SCLK */
--
1.7.5.4
next reply other threads:[~2012-08-13 14:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-13 14:18 Shawn Guo [this message]
2012-08-13 14:20 ` [PATCH] pinctrl: imx51: fix .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344867532-27068-1-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).