[PATCH 1/2] imx6q: Configure the pwm node for pinmux support

[hachimi.samir@gmail.com (hachimi.samir at gmail.com)]

From: Samir Hachimi <hachimi.samir@gmail.com>

 Add the pinmux support for pwm.
 Several pin can be set to PwmO for the same Pwm. This configuration set all
 of them when enabled.

Signed-off-by: Samir Hachimi <shachimi@adeneo-embedded.com>
---
 arch/arm/boot/dts/imx6q.dtsi |   42 ++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index fd57079..c913b99 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -248,23 +248,35 @@
 			};
 
 			pwm at 02080000 { /* PWM1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm1_1>;
 				reg = <0x02080000 0x4000>;
 				interrupts = <0 83 0x04>;
+				status = "disabled";
 			};
 
 			pwm at 02084000 { /* PWM2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm2_1>;
 				reg = <0x02084000 0x4000>;
 				interrupts = <0 84 0x04>;
+				status = "disabled";
 			};
 
 			pwm at 02088000 { /* PWM3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm3_1>;
 				reg = <0x02088000 0x4000>;
 				interrupts = <0 85 0x04>;
+				status = "disabled";
 			};
 
 			pwm at 0208c000 { /* PWM4 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm4_1>;
 				reg = <0x0208c000 0x4000>;
 				interrupts = <0 86 0x04>;
+				status = "disabled";
 			};
 
 			flexcan at 02090000 { /* CAN1 */
@@ -559,6 +571,36 @@
 					};
 				};
 
+				pwm1 {
+				     	pinctrl_pwm1_1: pwm1grp-1 {
+						fsl,pins = <1543 0x80000000	/* MX6Q_PAD_SD1_DAT3__PWM1_PWMO */
+							    574 0x80000000      /* MX6Q_PAD_DISPO_DAT8__PWM1_PWMO */
+							    971 0x80000000>;	/* MX6Q_PAD_GPIO_9__PWM1_PWMO */
+					};
+				};
+
+				pwm2 {
+				     	pinctrl_pwm2_1: pwm2grp-1 {
+						fsl,pins = <1557 0x80000000     /* MX6Q_PAD_SD1_DAT2__PWM2_PWMO */
+							    582 0x80000000	/* MX6Q_PAD_DISP0_DAT9__PWM2_PWMO */
+							    963 0x80000000>;	/* MX6Q_PAD_GPIO_1__PWM2_PWMO */
+					};
+				};
+
+				pwm3 {
+				     	pinctrl_pwm3_1: pwm3grp-1 {
+						fsl,pins = <1471 0x80000000	/* MX6Q_PAD_SD4_DAT1__PWM3_PWMO */
+							    1526 0x80000000>;	/* MX6Q_PAD_SD1_DAT1__PWM3_PWMO */
+					};
+				};
+
+				pwm4 {
+				     	pinctrl_pwm4_1: pwm4grp-1 {
+						fsl,pins = <1479 0x80000000	/* MX6Q_PAD_SD4_DAT2__PWM4_PWMO */
+							    1550 0x80000000>;	/* MX6Q_PAD_SD1_CMD__PWM4_PWMO */
+					};
+				};
+
 				usdhc3 {
 					pinctrl_usdhc3_1: usdhc3grp-1 {
 						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-- 
1.7.1