[PATCH v2 0/8] arm: Add Artpec-6 SoC

[arnd@arndb.de (Arnd Bergmann)]

On Thursday 11 February 2016 15:04:34 Lars Persson wrote:
> Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and
> ethernet are wired up.
> 
> Changes since v1:
> - Corrected bindings for axis,artpec6-pll1-clock.
> - Moved the uart aliases to the board dts.
> - Kconfig cleanup.
> - Added a device tree binding for the dma configuration.
> - Added CONFIG_SYNOPSYS_DWC_ETH_QOS to multi_v7_defconfig.
> - Added binding documentation for axis,artpec6-dev-board.
> 
> Lars Persson (8):
>   clk: add device tree binding for artpec-6 pll1 clock
>   clk: add artpec-6 pll1 clock driver
>   arm: add device-tree SoC bindings for Axis Artpec-6
>   arm: dts: add Artpec-6 SoC dtsi file
>   arm: dts: add Artpec-6 development board dts
>   arm: initial machine port for artpec-6 SoC
>   arm: multi_v7_defconfig: add MACH_ARTPEC6
>   arm: mach-artpec: add entry to MAINTAINERS

Looks good except for the one issue I pointed out in patch 3 (and also 6).
Once that is resolved, please submit the new platform for inclusion by sending
it to arm at kernel.org.

The first two patches should get merged through the drivers/clk maintainer tree,
please submit them separately there.

	Arnd