From: richard.zhao@freescale.com (Richard Zhao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/11] USB: chipidea: add vbus detect for udc
Date: Tue, 28 Aug 2012 15:03:13 +0800 [thread overview]
Message-ID: <1346137397-32374-8-git-send-email-richard.zhao@freescale.com> (raw)
In-Reply-To: <1346137397-32374-1-git-send-email-richard.zhao@freescale.com>
Using vbus valid interrupt to detect vbus.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
drivers/usb/chipidea/ci.h | 1 +
drivers/usb/chipidea/udc.c | 39 ++++++++++++++++++++++++++++++++++++++-
2 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index d738603..e25d126 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -139,6 +139,7 @@ struct ci13xxx {
enum ci_role role;
bool is_otg;
struct work_struct work;
+ struct work_struct vbus_work;
struct workqueue_struct *wq;
struct dma_pool *qh_pool;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 9fb6394..2cb4498 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -308,6 +308,18 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci)
return reg;
}
+static void hw_enable_vbus_intr(struct ci13xxx *ci)
+{
+ hw_write(ci, OP_OTGSC, OTGSC_AVVIS, OTGSC_AVVIS);
+ hw_write(ci, OP_OTGSC, OTGSC_AVVIE, OTGSC_AVVIE);
+ queue_work(ci->wq, &ci->vbus_work);
+}
+
+static void hw_disable_vbus_intr(struct ci13xxx *ci)
+{
+ hw_write(ci, OP_OTGSC, OTGSC_AVVIE, 0);
+}
+
/**
* hw_test_and_clear_setup_guard: test & clear setup guard (execute without
* interruption)
@@ -374,6 +386,16 @@ static int hw_usb_reset(struct ci13xxx *ci)
return 0;
}
+static void vbus_work(struct work_struct *work)
+{
+ struct ci13xxx *ci = container_of(work, struct ci13xxx, vbus_work);
+
+ if (hw_read(ci, OP_OTGSC, OTGSC_AVV))
+ usb_gadget_vbus_connect(&ci->gadget);
+ else
+ usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
/******************************************************************************
* UTIL block
*****************************************************************************/
@@ -1376,6 +1398,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
if (is_active) {
pm_runtime_get_sync(&_gadget->dev);
hw_device_reset(ci, USBMODE_CM_DC);
+ hw_enable_vbus_intr(ci);
hw_device_state(ci, ci->ep0out->qh.dma);
} else {
hw_device_state(ci, 0);
@@ -1517,8 +1540,10 @@ static int ci13xxx_start(struct usb_gadget *gadget,
pm_runtime_get_sync(&ci->gadget.dev);
if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
if (ci->vbus_active) {
- if (ci->platdata->flags & CI13XXX_REGS_SHARED)
+ if (ci->platdata->flags & CI13XXX_REGS_SHARED) {
hw_device_reset(ci, USBMODE_CM_DC);
+ hw_enable_vbus_intr(ci);
+ }
} else {
pm_runtime_put_sync(&ci->gadget.dev);
goto done;
@@ -1624,6 +1649,13 @@ static irqreturn_t udc_irq(struct ci13xxx *ci)
} else {
retval = IRQ_NONE;
}
+
+ intr = hw_read(ci, OP_OTGSC, ~0);
+ hw_write(ci, OP_OTGSC, ~0, intr);
+
+ if (intr & (OTGSC_AVVIE & OTGSC_AVVIS))
+ queue_work(ci->wq, &ci->vbus_work);
+
spin_unlock(&ci->lock);
return retval;
@@ -1699,6 +1731,7 @@ static int udc_start(struct ci13xxx *ci)
retval = hw_device_reset(ci, USBMODE_CM_DC);
if (retval)
goto put_transceiver;
+ hw_enable_vbus_intr(ci);
}
retval = device_register(&ci->gadget.dev);
@@ -1762,6 +1795,9 @@ static void udc_stop(struct ci13xxx *ci)
if (ci == NULL)
return;
+ hw_disable_vbus_intr(ci);
+ cancel_work_sync(&ci->vbus_work);
+
usb_del_gadget_udc(&ci->gadget);
for (i = 0; i < ci->hw_ep_max; i++) {
@@ -1806,6 +1842,7 @@ int ci_hdrc_gadget_init(struct ci13xxx *ci)
rdrv->irq = udc_irq;
rdrv->name = "gadget";
ci->roles[CI_ROLE_GADGET] = rdrv;
+ INIT_WORK(&ci->vbus_work, vbus_work);
return 0;
}
--
1.7.9.5
next prev parent reply other threads:[~2012-08-28 7:03 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-28 7:03 [PATCH v2 00/11] chipidea/imx: add otg support and some bug fix Richard Zhao
2012-08-28 7:03 ` [PATCH v2 01/11] USB: chipidea: imx: add pinctrl support Richard Zhao
2012-08-28 7:03 ` [PATCH v2 02/11] USB: chipidea: delay 2ms before read ID status at probe time Richard Zhao
2012-08-28 7:03 ` [PATCH v2 03/11] USB: chipidea: move OTGSC_IDIS clearing from ci_role_work to irq handler Richard Zhao
2012-08-28 7:03 ` [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path Richard Zhao
2012-08-28 8:29 ` Alexander Shishkin
2012-08-28 9:09 ` Richard Zhao
2012-08-29 8:03 ` Alexander Shishkin
2012-08-29 8:22 ` Richard Zhao
2012-08-29 9:44 ` Alexander Shishkin
2012-08-29 10:37 ` Richard Zhao
2012-08-28 7:03 ` [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed Richard Zhao
2012-08-28 8:38 ` Alexander Shishkin
2012-08-28 9:27 ` Richard Zhao
2012-08-29 8:10 ` Alexander Shishkin
2012-08-29 8:33 ` Richard Zhao
2012-08-29 9:48 ` Alexander Shishkin
2012-08-29 10:46 ` Richard Zhao
2012-09-04 14:17 ` Richard Zhao
2012-09-11 7:23 ` Alexander Shishkin
2012-09-11 8:18 ` Richard Zhao
2012-09-12 10:47 ` Alexander Shishkin
2012-09-14 8:35 ` Richard Zhao
2012-09-14 10:25 ` Alexander Shishkin
2012-09-17 8:59 ` Richard Zhao
2012-08-28 7:03 ` [PATCH v2 06/11] USB: mxs-phy: add basic otg support Richard Zhao
2012-09-11 9:05 ` Felipe Balbi
2012-09-12 10:39 ` Heikki Krogerus
2012-09-14 8:30 ` Richard Zhao
2012-09-14 8:56 ` Chen Peter-B29397
2012-09-14 10:53 ` Richard Zhao
2012-08-28 7:03 ` Richard Zhao [this message]
2012-08-28 7:03 ` [PATCH v2 08/11] USB: chipidea: convert to use devm_request_irq Richard Zhao
2012-08-28 7:03 ` [PATCH v2 09/11] USB: chipidea: add -DDEBUG if CONFIG_USB_CHIPIDEA_DEBUG Richard Zhao
2012-08-28 7:03 ` [PATCH v2 10/11] USB: chipidea: add set_vbus_power support Richard Zhao
2012-09-19 1:25 ` Richard Zhao
2012-08-28 7:03 ` [PATCH v2 11/11] USB: chipidea: re-order irq handling to avoid unhandled irq Richard Zhao
2012-09-05 14:27 ` [PATCH v2 00/11] chipidea/imx: add otg support and some bug fix Marc Kleine-Budde
2012-09-05 15:01 ` Michael Grzeschik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346137397-32374-8-git-send-email-richard.zhao@freescale.com \
--to=richard.zhao@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).