From mboxrd@z Thu Jan 1 00:00:00 1970 From: b29396@freescale.com (Dong Aisheng) Date: Tue, 28 Aug 2012 17:10:04 +0800 Subject: [PATCH v3 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop In-Reply-To: <1346145005-17961-1-git-send-email-b29396@freescale.com> References: <1346145005-17961-1-git-send-email-b29396@freescale.com> Message-ID: <1346145005-17961-7-git-send-email-b29396@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Dong Aisheng Originally the anatop regulator devices are populated by mfd anatop driver. Since mfd anatop driver will be deleted later, we change to populate the regulator devices by devicetree automatically. This will cause some warning messages as follows during boot due to device recreation: "vdd1p1: Failed to create debugfs directory" But it does not break any function. Later, we will remove mfd anatop driver which can get rid of this error message. Signed-off-by: Dong Aisheng --- arch/arm/boot/dts/imx6q.dtsi | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index db3fa15..52ed4d1 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -379,7 +379,7 @@ }; anatop: anatop at 020c8000 { - compatible = "fsl,imx6q-anatop", "syscon"; + compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; -- 1.7.0.4