From: gcembed@gmail.com (Gaëtan Carlier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] MFD : MC13783 : add regulators sw1x and sw2x
Date: Tue, 28 Aug 2012 13:09:10 +0200 [thread overview]
Message-ID: <1346152150-21669-1-git-send-email-gcembed@gmail.com> (raw)
Signed-off-by: Ga?tan Carlier <gcembed@gmail.com>
---
drivers/regulator/mc13783-regulator.c | 66 +++++++++++++++++++++++++++++++++
1 files changed, 66 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 4977b19..0801a6d 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -21,6 +21,30 @@
#include <linux/module.h>
#include "mc13xxx.h"
+#define MC13783_REG_SWITCHERS0 24
+/* Enable does not exist for SW1A */
+#define MC13783_REG_SWITCHERS0_SW1AEN 0
+#define MC13783_REG_SWITCHERS0_SW1AVSEL 0
+#define MC13783_REG_SWITCHERS0_SW1AVSEL_M (63 << 0)
+
+#define MC13783_REG_SWITCHERS1 25
+/* Enable does not exist for SW1B */
+#define MC13783_REG_SWITCHERS1_SW1BEN 0
+#define MC13783_REG_SWITCHERS1_SW1BVSEL 0
+#define MC13783_REG_SWITCHERS1_SW1BVSEL_M (63 << 0)
+
+#define MC13783_REG_SWITCHERS2 26
+/* Enable does not exist for SW2A */
+#define MC13783_REG_SWITCHERS2_SW2AEN 0
+#define MC13783_REG_SWITCHERS2_SW2AVSEL 0
+#define MC13783_REG_SWITCHERS2_SW2AVSEL_M (63 << 0)
+
+#define MC13783_REG_SWITCHERS3 27
+/* Enable does not exist for SW2B */
+#define MC13783_REG_SWITCHERS3_SW2BEN 0
+#define MC13783_REG_SWITCHERS3_SW2BVSEL 0
+#define MC13783_REG_SWITCHERS3_SW2BVSEL_M (63 << 0)
+
#define MC13783_REG_SWITCHERS5 29
#define MC13783_REG_SWITCHERS5_SW3EN (1 << 20)
#define MC13783_REG_SWITCHERS5_SW3VSEL 18
@@ -93,6 +117,44 @@
/* Voltage Values */
+static const int mc13783_sw1x_val[] = {
+ 900000, 925000, 950000, 975000,
+ 1000000, 1025000, 1050000, 1075000,
+ 1100000, 1125000, 1150000, 1175000,
+ 1200000, 1225000, 1250000, 1275000,
+ 1300000, 1325000, 1350000, 1375000,
+ 1400000, 1425000, 1450000, 1475000,
+ 1500000, 1525000, 1550000, 1575000,
+ 1600000, 1625000, 1650000, 1675000,
+ 1700000, 1700000, 1700000, 1700000,
+ 1800000, 1800000, 1800000, 1800000,
+ 1850000, 1850000, 1850000, 1850000,
+ 2000000, 2000000, 2000000, 2000000,
+ 2100000, 2100000, 2100000, 2100000,
+ 2200000, 2200000, 2200000, 2200000,
+ 2200000, 2200000, 2200000, 2200000,
+ 2200000, 2200000, 2200000, 2200000,
+};
+
+static const int mc13783_sw2x_val[] = {
+ 900000, 925000, 950000, 975000,
+ 1000000, 1025000, 1050000, 1075000,
+ 1100000, 1125000, 1150000, 1175000,
+ 1200000, 1225000, 1250000, 1275000,
+ 1300000, 1325000, 1350000, 1375000,
+ 1400000, 1425000, 1450000, 1475000,
+ 1500000, 1525000, 1550000, 1575000,
+ 1600000, 1625000, 1650000, 1675000,
+ 1700000, 1700000, 1700000, 1700000,
+ 1800000, 1800000, 1800000, 1800000,
+ 1900000, 1900000, 1900000, 1900000,
+ 2000000, 2000000, 2000000, 2000000,
+ 2100000, 2100000, 2100000, 2100000,
+ 2200000, 2200000, 2200000, 2200000,
+ 2200000, 2200000, 2200000, 2200000,
+ 2200000, 2200000, 2200000, 2200000,
+};
+
static const unsigned int mc13783_sw3_val[] = {
5000000, 5000000, 5000000, 5500000,
};
@@ -188,6 +250,10 @@ static struct regulator_ops mc13783_gpo_regulator_ops;
MC13783_DEFINE(REG, _name, _reg, _vsel_reg, _voltages)
static struct mc13xxx_regulator mc13783_regulators[] = {
+ MC13783_DEFINE_SW(SW1A, SWITCHERS0, SWITCHERS0, mc13783_sw1x_val),
+ MC13783_DEFINE_SW(SW1B, SWITCHERS1, SWITCHERS1, mc13783_sw1x_val),
+ MC13783_DEFINE_SW(SW2A, SWITCHERS2, SWITCHERS2, mc13783_sw2x_val),
+ MC13783_DEFINE_SW(SW2B, SWITCHERS3, SWITCHERS3, mc13783_sw2x_val),
MC13783_DEFINE_SW(SW3, SWITCHERS5, SWITCHERS5, mc13783_sw3_val),
MC13783_FIXED_DEFINE(REG, VAUDIO, REGULATORMODE0, mc13783_vaudio_val),
--
1.7.7.4
next reply other threads:[~2012-08-28 11:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-28 11:09 Gaëtan Carlier [this message]
2012-08-28 17:06 ` [PATCH] MFD : MC13783 : add regulators sw1x and sw2x Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346152150-21669-1-git-send-email-gcembed@gmail.com \
--to=gcembed@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).