[PATCH resend] i.MX53 Nand support

[PATCH resend] i.MX53 Nand support

[Sascha Hauer]

Hi All,

The following patches add i.MX53 and dt support to mxc_nand. This
is only a resent based on v3.6-rc3 as it seems this series slipped
through the cracks last time I posted it.

So Artem, if there are no objections, please consider applying up to
3/4, I would then take 4/4 through my tree.

Sascha

The following changes since commit fea7a08acb13524b47711625eebea40a0ede69a0:

  Linux 3.6-rc3 (2012-08-22 13:29:06 -0700)

are available in the git repository at:

  git://git.pengutronix.de/git/imx/linux-2.6.git tags/mtd-imx53-nand

for you to fetch changes up to 587450da74aa7db28fe0e9a9ee2a3816140fa8f4:

  ARM i.MX5: Add nand oftree support (2012-08-29 09:33:47 +0200)

----------------------------------------------------------------
Add i.MX53 and dt support to the mxc_nand driver

----------------------------------------------------------------
Sascha Hauer (4):
      mtd nand mxc_nand: Use managed resources
      mtd nand mxc_nand: swap iomem resource order
      mtd nand mxc_nand: add i.MX53 support
      ARM i.MX5: Add nand oftree support

 arch/arm/boot/dts/imx51.dtsi                  |    7 ++
 arch/arm/boot/dts/imx53.dtsi                  |    7 ++
 arch/arm/mach-imx/clk-imx51-imx53.c           |    2 +
 arch/arm/plat-mxc/devices/platform-mxc_nand.c |   11 +-
 drivers/mtd/nand/mxc_nand.c                   |  137 ++++++++++++++-----------
 5 files changed, 97 insertions(+), 67 deletions(-)

[PATCH 1/4] mtd nand mxc_nand: Use managed resources

[Sascha Hauer]

To make the error path simpler and to make subsequent patches
easier.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mtd/nand/mxc_nand.c |   70 ++++++++++++++-----------------------------
 1 file changed, 23 insertions(+), 47 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 6acc790..268c0dc 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1344,8 +1344,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	int err = 0;
 
 	/* Allocate memory for MTD device structure and private data */
-	host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
-			NAND_MAX_OOBSIZE, GFP_KERNEL);
+	host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host) +
+			NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, GFP_KERNEL);
 	if (!host)
 		return -ENOMEM;
 
@@ -1372,26 +1372,17 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	this->read_buf = mxc_nand_read_buf;
 	this->verify_buf = mxc_nand_verify_buf;
 
-	host->clk = clk_get(&pdev->dev, "nfc");
-	if (IS_ERR(host->clk)) {
-		err = PTR_ERR(host->clk);
-		goto eclk;
-	}
-
-	clk_prepare_enable(host->clk);
-	host->clk_act = 1;
+	host->clk = devm_clk_get(&pdev->dev, "nfc");
+	if (IS_ERR(host->clk))
+		return PTR_ERR(host->clk);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		err = -ENODEV;
-		goto eres;
-	}
+	if (!res)
+		return -ENODEV;
 
-	host->base = ioremap(res->start, resource_size(res));
-	if (!host->base) {
-		err = -ENOMEM;
-		goto eres;
-	}
+	host->base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!host->base)
+		return -ENOMEM;
 
 	host->main_area0 = host->base;
 
@@ -1399,7 +1390,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	if (err > 0)
 		err = mxcnd_probe_pdata(host);
 	if (err < 0)
-		goto eirq;
+		return err;
 
 	if (host->devtype_data->regs_offset)
 		host->regs = host->base + host->devtype_data->regs_offset;
@@ -1416,15 +1407,11 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 
 	if (host->devtype_data->needs_ip) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (!res) {
-			err = -ENODEV;
-			goto eirq;
-		}
-		host->regs_ip = ioremap(res->start, resource_size(res));
-		if (!host->regs_ip) {
-			err = -ENOMEM;
-			goto eirq;
-		}
+		if (!res)
+			return -ENODEV;
+		host->regs_ip = devm_request_and_ioremap(&pdev->dev, res);
+		if (!host->regs_ip)
+			return -ENOMEM;
 	}
 
 	if (host->pdata.hw_ecc) {
@@ -1458,9 +1445,13 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	 */
 	host->devtype_data->irq_control(host, 0);
 
-	err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
+	err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
+			IRQF_DISABLED, DRIVER_NAME, host);
 	if (err)
-		goto eirq;
+		return err;
+
+	clk_prepare_enable(host->clk);
+	host->clk_act = 1;
 
 	/*
 	 * Now that we "own" the interrupt make sure the interrupt mask bit is
@@ -1512,15 +1503,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	return 0;
 
 escan:
-	free_irq(host->irq, host);
-eirq:
-	if (host->regs_ip)
-		iounmap(host->regs_ip);
-	iounmap(host->base);
-eres:
-	clk_put(host->clk);
-eclk:
-	kfree(host);
+	clk_disable_unprepare(host->clk);
 
 	return err;
 }
@@ -1529,16 +1512,9 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
 {
 	struct mxc_nand_host *host = platform_get_drvdata(pdev);
 
-	clk_put(host->clk);
-
 	platform_set_drvdata(pdev, NULL);
 
 	nand_release(&host->mtd);
-	free_irq(host->irq, host);
-	if (host->regs_ip)
-		iounmap(host->regs_ip);
-	iounmap(host->base);
-	kfree(host);
 
 	return 0;
 }
-- 
1.7.10.4

[PATCH 2/4] mtd nand mxc_nand: swap iomem resource order

[Sascha Hauer]

The i.MX v3 nand controller (i.MX5) needs two memory resources.
Traditionally we have the AXI resource first. For sorting in this
driver into the devicetree it feels much more natural to have the
IP resource first. This patch swaps the ordering of these two
resources.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/devices/platform-mxc_nand.c |   11 ++++----
 drivers/mtd/nand/mxc_nand.c                   |   35 ++++++++++++++-----------
 2 files changed, 24 insertions(+), 22 deletions(-)

diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
index 1568f39..95b75cc 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -63,10 +63,6 @@ struct platform_device *__init imx_add_mxc_nand(
 	/* AXI has to come first, that's how the mxc_nand driver expect it */
 	struct resource res[] = {
 		{
-			.start = data->axibase,
-			.end = data->axibase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
 			.start = data->iobase,
 			.end = data->iobase + data->iosize - 1,
 			.flags = IORESOURCE_MEM,
@@ -74,10 +70,13 @@ struct platform_device *__init imx_add_mxc_nand(
 			.start = data->irq,
 			.end = data->irq,
 			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->axibase,
+			.end = data->axibase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
 		},
 	};
 	return imx_add_platform_device("mxc_nand", data->id,
-			res + !data->axibase,
-			ARRAY_SIZE(res) - !data->axibase,
+			res, ARRAY_SIZE(res) - !data->axibase,
 			pdata, sizeof(*pdata));
 }
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 268c0dc..efbc72c 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1376,7 +1376,25 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	if (IS_ERR(host->clk))
 		return PTR_ERR(host->clk);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	err = mxcnd_probe_dt(host);
+	if (err > 0)
+		err = mxcnd_probe_pdata(host);
+	if (err < 0)
+		return err;
+
+	if (host->devtype_data->needs_ip) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res)
+			return -ENODEV;
+		host->regs_ip = devm_request_and_ioremap(&pdev->dev, res);
+		if (!host->regs_ip)
+			return -ENOMEM;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	}
+
 	if (!res)
 		return -ENODEV;
 
@@ -1386,12 +1404,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 
 	host->main_area0 = host->base;
 
-	err = mxcnd_probe_dt(host);
-	if (err > 0)
-		err = mxcnd_probe_pdata(host);
-	if (err < 0)
-		return err;
-
 	if (host->devtype_data->regs_offset)
 		host->regs = host->base + host->devtype_data->regs_offset;
 	host->spare0 = host->base + host->devtype_data->spare0_offset;
@@ -1405,15 +1417,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	this->ecc.size = 512;
 	this->ecc.layout = host->devtype_data->ecclayout_512;
 
-	if (host->devtype_data->needs_ip) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (!res)
-			return -ENODEV;
-		host->regs_ip = devm_request_and_ioremap(&pdev->dev, res);
-		if (!host->regs_ip)
-			return -ENOMEM;
-	}
-
 	if (host->pdata.hw_ecc) {
 		this->ecc.calculate = mxc_nand_calculate_ecc;
 		this->ecc.hwctl = mxc_nand_enable_hwecc;
-- 
1.7.10.4

[PATCH 3/4] mtd nand mxc_nand: add i.MX53 support

[Sascha Hauer]

The only relevant change between i.MX51 and i.MX53 is that
a bitfield is shifted one bit to the left.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mtd/nand/mxc_nand.c |   48 +++++++++++++++++++++++++++++++++++++------
 1 file changed, 42 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index efbc72c..49557c8 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -43,8 +43,8 @@
 
 #define nfc_is_v21()		(cpu_is_mx25() || cpu_is_mx35())
 #define nfc_is_v1()		(cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2()		(cpu_is_mx51() || cpu_is_mx53())
-#define nfc_is_v3()		nfc_is_v3_2()
+#define nfc_is_v3_2a()		cpu_is_mx51()
+#define nfc_is_v3_2b()		cpu_is_mx53()
 
 /* Addresses for NFC registers */
 #define NFC_V1_V2_BUF_SIZE		(host->regs + 0x00)
@@ -122,7 +122,7 @@
 #define NFC_V3_CONFIG2_2CMD_PHASES		(1 << 4)
 #define NFC_V3_CONFIG2_NUM_ADDR_PHASE0		(1 << 5)
 #define NFC_V3_CONFIG2_ECC_MODE_8		(1 << 6)
-#define NFC_V3_CONFIG2_PPB(x)			(((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_PPB(x, shift)		(((x) & 0x3) << shift)
 #define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x)	(((x) & 0x3) << 12)
 #define NFC_V3_CONFIG2_INT_MSK			(1 << 15)
 #define NFC_V3_CONFIG2_ST_CMD(x)		(((x) & 0xff) << 24)
@@ -174,6 +174,7 @@ struct mxc_nand_devtype_data {
 	int spare_len;
 	int eccbytes;
 	int eccsize;
+	int ppb_shift;
 };
 
 struct mxc_nand_host {
@@ -1021,7 +1022,9 @@ static void preset_v3(struct mtd_info *mtd)
 	}
 
 	if (mtd->writesize) {
-		config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6);
+		config2 |= NFC_V3_CONFIG2_PPB(
+				ffs(mtd->erasesize / mtd->writesize) - 6,
+				host->devtype_data->ppb_shift);
 		host->eccsize = get_eccsize(mtd);
 		if (host->eccsize == 8)
 			config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
@@ -1234,7 +1237,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
 	.eccsize = 0,
 };
 
-/* v3: i.MX51, i.MX53 */
+/* v3.2a: i.MX51 */
 static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
 	.preset = preset_v3,
 	.send_cmd = send_cmd_v3,
@@ -1258,6 +1261,34 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
 	.spare_len = 64,
 	.eccbytes = 0,
 	.eccsize = 0,
+	.ppb_shift = 7,
+};
+
+/* v3.2b: i.MX53 */
+static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
+	.preset = preset_v3,
+	.send_cmd = send_cmd_v3,
+	.send_addr = send_addr_v3,
+	.send_page = send_page_v3,
+	.send_read_id = send_read_id_v3,
+	.get_dev_status = get_dev_status_v3,
+	.check_int = check_int_v3,
+	.irq_control = irq_control_v3,
+	.get_ecc_status = get_ecc_status_v3,
+	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v2_v3,
+	.irqpending_quirk = 0,
+	.needs_ip = 1,
+	.regs_offset = 0,
+	.spare0_offset = 0x1000,
+	.axi_offset = 0x1e00,
+	.spare_len = 64,
+	.eccbytes = 0,
+	.eccsize = 0,
+	.ppb_shift = 8,
 };
 
 #ifdef CONFIG_OF_MTD
@@ -1274,6 +1305,9 @@ static const struct of_device_id mxcnd_dt_ids[] = {
 	}, {
 		.compatible = "fsl,imx51-nand",
 		.data = &imx51_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx53-nand",
+		.data = &imx53_nand_devtype_data,
 	},
 	{ /* sentinel */ }
 };
@@ -1327,8 +1361,10 @@ static int __init mxcnd_probe_pdata(struct mxc_nand_host *host)
 			host->devtype_data = &imx27_nand_devtype_data;
 	} else if (nfc_is_v21()) {
 		host->devtype_data = &imx25_nand_devtype_data;
-	} else if (nfc_is_v3_2()) {
+	} else if (nfc_is_v3_2a()) {
 		host->devtype_data = &imx51_nand_devtype_data;
+	} else if (nfc_is_v3_2b()) {
+		host->devtype_data = &imx53_nand_devtype_data;
 	} else
 		BUG();
 
-- 
1.7.10.4

[PATCH 4/4] ARM i.MX5: Add nand oftree support

[Sascha Hauer]

This adds snippets to the i.MX51/53 devicetrees for the nand
flash controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/boot/dts/imx51.dtsi        |    7 +++++++
 arch/arm/boot/dts/imx53.dtsi        |    7 +++++++
 arch/arm/mach-imx/clk-imx51-imx53.c |    2 ++
 3 files changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index aba28dc..aaa0c0a 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -263,6 +263,13 @@
 				status = "disabled";
 			};
 
+			nand at 83fdb000 {
+				compatible = "fsl,imx51-nand";
+				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
+				interrupts = <8>;
+				status = "disabled";
+			};
+
 			ssi3: ssi at 83fe8000 {
 				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 				reg = <0x83fe8000 0x4000>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index cd37165..dc00c62 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -321,6 +321,13 @@
 				status = "disabled";
 			};
 
+			nand at 63fdb000 {
+				compatible = "fsl,imx53-nand";
+				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+				interrupts = <8>;
+				status = "disabled";
+			};
+
 			ssi3: ssi at 63fe8000 {
 				compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
 				reg = <0x63fe8000 0x4000>;
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 4bdcaa9..e81f17a 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -367,6 +367,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi");
+	clk_register_clkdev(clk[nfc_gate], NULL, "83fdb000.nand");
 
 	/* set the usboh3 parent to pll2_sw */
 	clk_set_parent(clk[usboh3_sel], clk[pll2_sw]);
@@ -455,6 +456,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
+	clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand");
 
 	/* set SDHC root clock to 200MHZ*/
 	clk_set_rate(clk[esdhc_a_podf], 200000000);
-- 
1.7.10.4

[PATCH resend] i.MX53 Nand support

[Artem Bityutskiy]

On Wed, 2012-08-29 at 09:40 +0200, Sascha Hauer wrote:
> Hi All,
> 
> The following patches add i.MX53 and dt support to mxc_nand. This
> is only a resent based on v3.6-rc3 as it seems this series slipped
> through the cracks last time I posted it.
> 
> So Artem, if there are no objections, please consider applying up to
> 3/4, I would then take 4/4 through my tree.

Please, take a look at the l2-mtd.git tree, I already have all these
patches. Actually, they are already in dwmw2's tree, the and were
supposed to be merged already, but unfortunately the merge window was
missed because (a) dwmw2 did not send a pull request early enough and
(b) Linus decided to punish late pull-request senders and closed the
merge window 2 days earlier than usually.

-- 
Best Regards,
Artem Bityutskiy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120830/63b16be4/attachment.sig>

[PATCH resend] i.MX53 Nand support

[Sascha Hauer]

On Thu, Aug 30, 2012 at 09:29:05AM +0300, Artem Bityutskiy wrote:
> On Wed, 2012-08-29 at 09:40 +0200, Sascha Hauer wrote:
> > Hi All,
> > 
> > The following patches add i.MX53 and dt support to mxc_nand. This
> > is only a resent based on v3.6-rc3 as it seems this series slipped
> > through the cracks last time I posted it.
> > 
> > So Artem, if there are no objections, please consider applying up to
> > 3/4, I would then take 4/4 through my tree.
> 
> Please, take a look at the l2-mtd.git tree, I already have all these
> patches. Actually, they are already in dwmw2's tree, the and were
> supposed to be merged already, but unfortunately the merge window was
> missed because (a) dwmw2 did not send a pull request early enough and
> (b) Linus decided to punish late pull-request senders and closed the
> merge window 2 days earlier than usually.

Ah, I missed to check the tree. Sorry for the noise then.

Thanks
 Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

No subject

[Sascha Hauer]

The following adds i.MX53 nand support and generally devicetree
based probing for i.MX5 boards. The first three patches should go
via mtd, the last patch optionally aswell if all agree.

Sascha

The following changes since commit f8f5701bdaf9134b1f90e5044a82c66324d2073f:

  Linux 3.5-rc1 (2012-06-02 18:29:26 -0700)

are available in the git repository at:

  git://git.pengutronix.de/git/imx/linux-2.6.git imx/nand-mx53

for you to fetch changes up to d55d1479a3bfaedbb9f0c6c956f4dff6bb6d6d61:

  ARM i.MX5: Add nand oftree support (2012-06-06 12:20:24 +0200)

----------------------------------------------------------------
Sascha Hauer (4):
      mtd nand mxc_nand: Use managed resources
      mtd nand mxc_nand: swap iomem resource order
      mtd nand mxc_nand: add i.MX53 support
      ARM i.MX5: Add nand oftree support

 arch/arm/boot/dts/imx51.dtsi                  |    7 ++
 arch/arm/boot/dts/imx53.dtsi                  |    7 ++
 arch/arm/mach-imx/clk-imx51-imx53.c           |    2 +
 arch/arm/plat-mxc/devices/platform-mxc_nand.c |   11 +-
 drivers/mtd/nand/mxc_nand.c                   |  137 ++++++++++++++-----------
 5 files changed, 97 insertions(+), 67 deletions(-)

[PATCH 3/4] mtd nand mxc_nand: add i.MX53 support

[Sascha Hauer]

The only relevant change between i.MX51 and i.MX53 is that
a bitfield is shifted one bit to the left.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mtd/nand/mxc_nand.c |   48 +++++++++++++++++++++++++++++++++++++------
 1 file changed, 42 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index cc0f6e7..1aae564 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -43,8 +43,8 @@
 
 #define nfc_is_v21()		(cpu_is_mx25() || cpu_is_mx35())
 #define nfc_is_v1()		(cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2()		(cpu_is_mx51() || cpu_is_mx53())
-#define nfc_is_v3()		nfc_is_v3_2()
+#define nfc_is_v3_2a()		cpu_is_mx51()
+#define nfc_is_v3_2b()		cpu_is_mx53()
 
 /* Addresses for NFC registers */
 #define NFC_V1_V2_BUF_SIZE		(host->regs + 0x00)
@@ -122,7 +122,7 @@
 #define NFC_V3_CONFIG2_2CMD_PHASES		(1 << 4)
 #define NFC_V3_CONFIG2_NUM_ADDR_PHASE0		(1 << 5)
 #define NFC_V3_CONFIG2_ECC_MODE_8		(1 << 6)
-#define NFC_V3_CONFIG2_PPB(x)			(((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_PPB(x, shift)		(((x) & 0x3) << shift)
 #define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x)	(((x) & 0x3) << 12)
 #define NFC_V3_CONFIG2_INT_MSK			(1 << 15)
 #define NFC_V3_CONFIG2_ST_CMD(x)		(((x) & 0xff) << 24)
@@ -174,6 +174,7 @@ struct mxc_nand_devtype_data {
 	int spare_len;
 	int eccbytes;
 	int eccsize;
+	int ppb_shift;
 };
 
 struct mxc_nand_host {
@@ -1001,7 +1002,9 @@ static void preset_v3(struct mtd_info *mtd)
 	}
 
 	if (mtd->writesize) {
-		config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6);
+		config2 |= NFC_V3_CONFIG2_PPB(
+				ffs(mtd->erasesize / mtd->writesize) - 6,
+				host->devtype_data->ppb_shift);
 		host->eccsize = get_eccsize(mtd);
 		if (host->eccsize == 8)
 			config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
@@ -1213,7 +1216,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
 	.eccsize = 0,
 };
 
-/* v3: i.MX51, i.MX53 */
+/* v3.2a: i.MX51 */
 static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
 	.preset = preset_v3,
 	.send_cmd = send_cmd_v3,
@@ -1237,6 +1240,34 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
 	.spare_len = 64,
 	.eccbytes = 0,
 	.eccsize = 0,
+	.ppb_shift = 7,
+};
+
+/* v3.2b: i.MX53 */
+static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
+	.preset = preset_v3,
+	.send_cmd = send_cmd_v3,
+	.send_addr = send_addr_v3,
+	.send_page = send_page_v3,
+	.send_read_id = send_read_id_v3,
+	.get_dev_status = get_dev_status_v3,
+	.check_int = check_int_v3,
+	.irq_control = irq_control_v3,
+	.get_ecc_status = get_ecc_status_v3,
+	.ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+	.ecclayout_2k = &nandv2_hw_eccoob_largepage,
+	.ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+	.select_chip = mxc_nand_select_chip_v1_v3,
+	.correct_data = mxc_nand_correct_data_v2_v3,
+	.irqpending_quirk = 0,
+	.needs_ip = 1,
+	.regs_offset = 0,
+	.spare0_offset = 0x1000,
+	.axi_offset = 0x1e00,
+	.spare_len = 64,
+	.eccbytes = 0,
+	.eccsize = 0,
+	.ppb_shift = 8,
 };
 
 #ifdef CONFIG_OF_MTD
@@ -1253,6 +1284,9 @@ static const struct of_device_id mxcnd_dt_ids[] = {
 	}, {
 		.compatible = "fsl,imx51-nand",
 		.data = &imx51_nand_devtype_data,
+	}, {
+		.compatible = "fsl,imx53-nand",
+		.data = &imx53_nand_devtype_data,
 	},
 	{ /* sentinel */ }
 };
@@ -1306,8 +1340,10 @@ static int __init mxcnd_probe_pdata(struct mxc_nand_host *host)
 			host->devtype_data = &imx27_nand_devtype_data;
 	} else if (nfc_is_v21()) {
 		host->devtype_data = &imx25_nand_devtype_data;
-	} else if (nfc_is_v3_2()) {
+	} else if (nfc_is_v3_2a()) {
 		host->devtype_data = &imx51_nand_devtype_data;
+	} else if (nfc_is_v3_2b()) {
+		host->devtype_data = &imx53_nand_devtype_data;
 	} else
 		BUG();
 
-- 
1.7.10