linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: p.zabel@pengutronix.de (Philipp Zabel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/4] misc: Generic on-chip SRAM allocation driver
Date: Mon,  3 Sep 2012 18:02:06 +0200	[thread overview]
Message-ID: <1346688128-22395-3-git-send-email-p.zabel@pengutronix.de> (raw)
In-Reply-To: <1346688128-22395-1-git-send-email-p.zabel@pengutronix.de>

This driver requests and remaps a memory region as configured in the
device tree. It serves memory from this region via the genalloc API.

Other drivers can retrieve the genalloc pool from a phandle pointing
to this drivers' device node in the device tree.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes since v2:
 - Return -EADDRNOTAVAIL if devm_request_and_ioremap fails.
---
 drivers/misc/Kconfig  |    9 +++++
 drivers/misc/Makefile |    1 +
 drivers/misc/sram.c   |  105 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 115 insertions(+)
 create mode 100644 drivers/misc/sram.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 98a442d..9a3395f 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -509,6 +509,15 @@ config USB_SWITCH_FSA9480
 	  stereo and mono audio, video, microphone and UART data to use
 	  a common connector port.
 
+config SRAM
+	bool "Generic on-chip SRAM driver"
+	depends on HAS_IOMEM
+	select GENERIC_ALLOCATOR
+	help
+	  This driver allows to declare a memory region to be managed
+	  by the genalloc API. It is supposed to be used for small
+	  on-chip SRAM areas found on many ARM SoCs.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index b88df7a..ccc759a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -50,3 +50,4 @@ obj-y				+= carma/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
 obj-$(CONFIG_INTEL_MEI)		+= mei/
+obj-$(CONFIG_SRAM)		+= sram.o
diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
new file mode 100644
index 0000000..d6e1230
--- /dev/null
+++ b/drivers/misc/sram.c
@@ -0,0 +1,105 @@
+/*
+ * Generic on-chip SRAM allocation driver
+ *
+ * Copyright (C) 2012 Philipp Zabel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/genalloc.h>
+
+struct sram_dev {
+	struct gen_pool *pool;
+};
+
+static int __devinit sram_probe(struct platform_device *pdev)
+{
+	void __iomem *virt_base;
+	struct sram_dev *sram;
+	struct resource *res;
+	unsigned long size;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	size = resource_size(res);
+
+	virt_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!virt_base)
+		return -EADDRNOTAVAIL;
+
+	sram = devm_kzalloc(&pdev->dev, sizeof(*sram), GFP_KERNEL);
+	if (!sram)
+		return -ENOMEM;
+
+	sram->pool = gen_pool_create(PAGE_SHIFT, -1);
+	if (!sram->pool)
+		return -ENOMEM;
+
+	ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
+				res->start, size, -1);
+	if (ret < 0) {
+		gen_pool_destroy(sram->pool);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, sram);
+
+	dev_dbg(&pdev->dev, "SRAM pool: %ld KiB @ 0x%p\n", size / 1024, virt_base);
+
+	return 0;
+}
+
+static int __devexit sram_remove(struct platform_device *pdev)
+{
+	struct sram_dev *sram = platform_get_drvdata(pdev);
+
+	if (gen_pool_avail(sram->pool) < gen_pool_size(sram->pool))
+		dev_dbg(&pdev->dev, "removed while SRAM allocated\n");
+
+	gen_pool_destroy(sram->pool);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id sram_dt_ids[] = {
+	{ .compatible = "sram" },
+	{ /* sentinel */ }
+};
+#endif
+
+static struct platform_driver sram_driver = {
+	.driver = {
+		.name = "sram",
+		.of_match_table = of_match_ptr(sram_dt_ids),
+	},
+	.probe = sram_probe,
+	.remove = __devexit_p(sram_remove),
+};
+
+module_platform_driver(sram_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philipp Zabel, Pengutronix");
+MODULE_DESCRIPTION("Generic SRAM allocator driver");
-- 
1.7.10.4

  parent reply	other threads:[~2012-09-03 16:02 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-03 16:02 [PATCH v3 0/4] Add device tree support for on-chip SRAM Philipp Zabel
2012-09-03 16:02 ` [PATCH v3 1/4] genalloc: add a global pool list, allow to find pools by phys address Philipp Zabel
2012-09-03 16:02 ` Philipp Zabel [this message]
2012-09-05  4:03   ` [PATCH v3 2/4] misc: Generic on-chip SRAM allocation driver Shawn Guo
2012-09-03 16:02 ` [PATCH v3 3/4] ARM: dts: add sram for imx53 and imx6q Philipp Zabel
2012-09-03 16:02 ` [PATCH v3 4/4] ARM i.MX: remove IRAM_ALLOC facility Philipp Zabel
2012-09-04  1:12 ` [PATCH v3 0/4] Add device tree support for on-chip SRAM Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346688128-22395-3-git-send-email-p.zabel@pengutronix.de \
    --to=p.zabel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).