linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: pawel.moll@arm.com (Pawel Moll)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/11] regulators: Versatile Express regulator driver
Date: Mon,  3 Sep 2012 17:25:27 +0100	[thread overview]
Message-ID: <1346689531-7212-8-git-send-email-pawel.moll@arm.com> (raw)
In-Reply-To: <1346689531-7212-1-git-send-email-pawel.moll@arm.com>

Implementation of the regulator framework driver for the
Versatile Express voltage control. Devices without
voltage constraints (ie. "regulator-[min|max]-microvolt"
properties in the DT node) are treated as fixed (or rather
read-only) regulators.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
---
 drivers/regulator/Kconfig    |    7 ++
 drivers/regulator/Makefile   |    1 +
 drivers/regulator/vexpress.c |  144 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 152 insertions(+)
 create mode 100644 drivers/regulator/vexpress.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4e932cc..7642773 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -404,6 +404,13 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_VEXPRESS
+	tristate "Versatile Express regulators"
+	depends on VEXPRESS_CONFIG_BUS
+	help
+	  This driver provides support for voltage regulators available
+	  on the ARM Ltd's Versatile Express platform.
+
 config REGULATOR_WM831X
 	tristate "Wolfson Microelectronics WM831x PMIC regulators"
 	depends on MFD_WM831X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3342615..0d4e10f 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
+obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress.c
new file mode 100644
index 0000000..c659b2e
--- /dev/null
+++ b/drivers/regulator/vexpress.c
@@ -0,0 +1,144 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#define DRVNAME "vexpress-regulator"
+#define pr_fmt(fmt) DRVNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/vexpress.h>
+
+struct vexpress_regulator {
+	struct regulator_desc desc;
+	struct regulator_dev *regdev;
+	struct vexpress_config_device *vecdev;
+};
+
+static int vexpress_regulator_get_voltage(struct regulator_dev *regdev)
+{
+	struct vexpress_regulator *reg = rdev_get_drvdata(regdev);
+	u32 uV;
+	int err = vexpress_config_read(reg->vecdev, 0, &uV);
+
+	return err ? err : uV;
+}
+
+static int vexpress_regulator_set_voltage(struct regulator_dev *regdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct vexpress_regulator *reg = rdev_get_drvdata(regdev);
+
+	return vexpress_config_write(reg->vecdev, 0, min_uV);
+}
+
+static struct regulator_ops vexpress_regulator_ops_ro = {
+	.get_voltage = vexpress_regulator_get_voltage,
+};
+
+static struct regulator_ops vexpress_regulator_ops = {
+	.get_voltage = vexpress_regulator_get_voltage,
+	.set_voltage = vexpress_regulator_set_voltage,
+};
+
+static int vexpress_regulator_probe(struct vexpress_config_device *vecdev)
+{
+	struct vexpress_regulator *reg;
+	struct regulator_init_data *init_data;
+	struct regulator_config config = { };
+
+	reg = devm_kzalloc(&vecdev->dev, sizeof(*reg), GFP_KERNEL);
+	if (!reg)
+		return -ENOMEM;
+
+	reg->vecdev = vecdev;
+
+	reg->desc.name = dev_name(&vecdev->dev);
+	reg->desc.type = REGULATOR_VOLTAGE;
+	reg->desc.owner = THIS_MODULE;
+
+	init_data = of_get_regulator_init_data(&vecdev->dev,
+			vecdev->dev.of_node);
+	if (!init_data) {
+		dev_err(&vecdev->dev, "Failed to get regulator data!\n");
+		return -EINVAL;
+	}
+
+	init_data->constraints.apply_uV = 0;
+	if (init_data->constraints.min_uV && init_data->constraints.max_uV)
+		reg->desc.ops = &vexpress_regulator_ops;
+	else
+		reg->desc.ops = &vexpress_regulator_ops_ro;
+
+	config.dev = &vecdev->dev;
+	config.init_data = init_data;
+	config.driver_data = reg;
+	config.of_node = vecdev->dev.of_node;
+
+	reg->regdev = regulator_register(&reg->desc, &config);
+	if (IS_ERR(reg->regdev)) {
+		dev_err(&vecdev->dev, "Failed to register regulator! (%ld)\n",
+				PTR_ERR(reg->regdev));
+		return PTR_ERR(reg->regdev);
+	}
+
+	vexpress_config_set_drvdata(vecdev, reg);
+
+	return 0;
+}
+
+static int __devexit vexpress_regulator_remove(struct vexpress_config_device
+		*vecdev)
+{
+	struct vexpress_regulator *reg = vexpress_config_get_drvdata(vecdev);
+
+	regulator_unregister(reg->regdev);
+
+	return 0;
+}
+
+static const unsigned vexpress_regulator_funcs[] = {
+	VEXPRESS_CONFIG_FUNC_VOLT,
+	0,
+};
+
+static struct vexpress_config_driver vexpress_regulator_driver = {
+	.funcs = vexpress_regulator_funcs,
+	.probe = vexpress_regulator_probe,
+	.remove = __devexit_p(vexpress_regulator_remove),
+	.driver	= {
+		.name = DRVNAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init vexpress_regulator_init(void)
+{
+	return vexpress_config_driver_register(&vexpress_regulator_driver);
+}
+
+static void __exit vexpress_regulator_exit(void)
+{
+	vexpress_config_driver_unregister(&vexpress_regulator_driver);
+}
+
+MODULE_AUTHOR("Pawel Moll <pawel.moll@arm.com>");
+MODULE_DESCRIPTION("Versatile Express regulator");
+MODULE_LICENSE("GPL");
+
+module_init(vexpress_regulator_init);
+module_exit(vexpress_regulator_exit);
-- 
1.7.9.5

  parent reply	other threads:[~2012-09-03 16:25 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-03 16:25 [PATCH 00/11] Versatile Express infrastructure Pawel Moll
2012-09-03 16:25 ` [PATCH 01/11] input: ambakmi: Add missing clk_[un]prepare() calls Pawel Moll
2012-09-04 13:37   ` Thomas Petazzoni
2012-09-04 13:45     ` Pawel Moll
2012-09-03 16:25 ` [PATCH 02/11] misc: Versatile Express config bus infrastructure Pawel Moll
2012-09-03 21:17   ` Arnd Bergmann
2012-09-04 11:53     ` Pawel Moll
2012-09-04 12:45       ` Arnd Bergmann
2012-09-04 16:41         ` Pawel Moll
2012-09-03 16:25 ` [PATCH 03/11] misc: Versatile Express reset driver Pawel Moll
2012-09-03 16:25 ` [PATCH 04/11] misc: Versatile Express display muxer driver Pawel Moll
2012-09-03 21:21   ` Arnd Bergmann
2012-09-04 11:53     ` Pawel Moll
2012-09-03 16:25 ` [PATCH 05/11] clk: Versatile Express clock generators ("osc") driver Pawel Moll
2012-09-10 19:14   ` Mike Turquette
2012-09-11 16:10     ` Pawel Moll
2012-09-11 18:00       ` Linus Walleij
2012-09-12 16:56         ` Pawel Moll
2012-09-11 18:33       ` Mike Turquette
2012-09-03 16:25 ` [PATCH 06/11] clk: Common clocks implementation for Versatile Express Pawel Moll
2012-09-03 21:24   ` Arnd Bergmann
2012-09-04 11:53     ` Pawel Moll
2012-09-04 12:43       ` Linus Walleij
2012-09-04 17:12         ` Ryan Harkin
2012-09-10 20:10   ` Mike Turquette
2012-09-03 16:25 ` Pawel Moll [this message]
2012-09-03 16:25 ` [PATCH 08/11] hwmon: Versatile Express hwmon driver Pawel Moll
2012-09-03 16:25 ` [PATCH 09/11] misc: Versatile Express system registers driver Pawel Moll
2012-09-03 16:25 ` [PATCH 10/11] ARM: vexpress: Add config bus components and clocks to DTs Pawel Moll
2012-09-04 12:58   ` Rob Herring
2012-09-04 13:05     ` Pawel Moll
2012-09-04 14:31       ` Rob Herring
2012-09-04 15:37         ` Pawel Moll
2012-09-04 17:51           ` Rob Herring
2012-09-19  9:44             ` Pawel Moll
2012-09-03 16:25 ` [PATCH 11/11] ARM: vexpress: Start using new Versatile Express infrastructure Pawel Moll

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346689531-7212-8-git-send-email-pawel.moll@arm.com \
    --to=pawel.moll@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).