From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: msm: Remove uncompiled board-msm7x27
Date: Thu, 6 Sep 2012 19:50:02 -0700 [thread overview]
Message-ID: <1346986202-21439-1-git-send-email-sboyd@codeaurora.org> (raw)
This board file has never been compiled. Let's just remove it
along with the one Kconfig reference to it in io.c.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/mach-msm/board-msm7x27.c | 170 --------------------------------------
arch/arm/mach-msm/io.c | 3 +-
2 files changed, 1 insertion(+), 172 deletions(-)
delete mode 100644 arch/arm/mach-msm/board-msm7x27.c
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
deleted file mode 100644
index 451ab1d..0000000
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/power_supply.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-#ifdef CONFIG_CACHE_L2X0
-#include <asm/hardware/cache-l2x0.h>
-#endif
-
-#include <mach/vreg.h>
-#include <mach/mpp.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "socinfo.h"
-#include "clock.h"
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x9C004300,
- .end = 0x9C0043ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MSM_GPIO_TO_INT(132),
- .end = MSM_GPIO_TO_INT(132),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &msm_device_uart3,
- &msm_device_smd,
- &msm_device_dmov,
- &msm_device_nand,
- &smc91x_device,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init msm7x2x_init_irq(void)
-{
- msm_init_irq();
-}
-
-static void __init msm7x2x_init(void)
-{
- if (socinfo_init() < 0)
- BUG();
-
- if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
- smc91x_resources[0].start = 0x98000300;
- smc91x_resources[0].end = 0x980003ff;
- smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
- smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
- if (gpio_tlmm_config(GPIO_CFG(85, 0,
- GPIO_INPUT,
- GPIO_PULL_DOWN,
- GPIO_2MA),
- GPIO_ENABLE)) {
- printk(KERN_ERR
- "%s: Err: Config GPIO-85 INT\n",
- __func__);
- }
- }
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x2x_map_io(void)
-{
- msm_map_common_io();
- /* Technically dependent on the SoC but using machine_is
- * macros since socinfo is not available this early and there
- * are plans to restructure the code which will eliminate the
- * need for socinfo.
- */
- if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
- msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
-
- if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
- msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
-
-#ifdef CONFIG_CACHE_L2X0
- if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
- /* 7x27 has 256KB L2 cache:
- 64Kb/Way and 4-Way Associativity;
- R/W latency: 3 cycles;
- evmon/parity/share disabled. */
- l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
- }
-#endif
-}
-
-static void __init msm7x2x_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 35d6926..d88a4eb 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -44,8 +44,7 @@
MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
- || defined(CONFIG_ARCH_MSM7X25)
+#if defined(CONFIG_ARCH_MSM7X00A)
static struct map_desc msm_io_desc[] __initdata = {
MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
reply other threads:[~2012-09-07 2:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346986202-21439-1-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).