From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] arm/dts: omap: Add usb_otg and glue data
Date: Tue, 11 Sep 2012 12:06:21 +0530 [thread overview]
Message-ID: <1347345381-4390-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1347345381-4390-1-git-send-email-kishon@ti.com>
Add usb otg data node in omap4/omap3 device tree file. Also update
the node with board specific setting in omapx-<board>.dts file.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap3-beagle.dts | 6 ++++++
arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
arch/arm/boot/dts/omap3.dtsi | 8 ++++++++
arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
arch/arm/boot/dts/omap4.dtsi | 8 ++++++++
6 files changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index cdcb98c..6d6a7a4 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -67,3 +67,9 @@
&mmc3 {
status = "disabled";
};
+
+&usb_otg_hs {
+ interface_type = <0>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index f349ee9..c4ac75e 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -46,3 +46,9 @@
reg = <0x5c>;
};
};
+
+&usb_otg_hs {
+ interface_type = <0>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 8109471..2501416 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -220,5 +220,13 @@
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
};
+
+ usb_otg_hs: usb_otg_hs {
+ compatible = "ti,omap3-musb";
+ ti,hwmods = "usb_otg_hs";
+ multipoint = <1>;
+ num_eps = <16>;
+ ram_bits = <12>;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 2999eba..8cded95 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -130,3 +130,9 @@
&twlusb {
usb-supply = <&vusb>;
};
+
+&usb_otg_hs {
+ interface_type = <1>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index d8290c0..24f4bfd 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -230,3 +230,9 @@
&twlusb {
usb-supply = <&vusb>;
};
+
+&usb_otg_hs {
+ interface_type = <1>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 04cbbcb..5db3d6a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -295,5 +295,13 @@
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
+
+ usb_otg_hs: usb_otg_hs {
+ compatible = "ti,omap4-musb";
+ ti,hwmods = "usb_otg_hs";
+ multipoint = <1>;
+ num_eps = <16>;
+ ram_bits = <12>;
+ };
};
};
--
1.7.9.5
next prev parent reply other threads:[~2012-09-11 6:36 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-11 6:36 [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2012-09-11 6:36 ` [PATCH v2 1/3] arm/dts: Add twl6030-usb data Kishon Vijay Abraham I
2012-09-11 9:26 ` Benoit Cousson
2012-09-11 9:39 ` ABRAHAM, KISHON VIJAY
2012-09-11 10:05 ` Benoit Cousson
2012-09-11 6:36 ` [PATCH v2 2/3] arm/dts: Add twl4030-usb data Kishon Vijay Abraham I
2012-09-11 10:09 ` Benoit Cousson
2012-09-11 11:07 ` ABRAHAM, KISHON VIJAY
2012-09-11 6:36 ` Kishon Vijay Abraham I [this message]
2012-09-11 10:18 ` [PATCH v2 3/3] arm/dts: omap: Add usb_otg and glue data Benoit Cousson
2012-09-11 8:25 ` [PATCH v2 0/3] arm/dts: omap: add dt data for MUSB Benoit Cousson
2012-09-11 8:44 ` ABRAHAM, KISHON VIJAY
2012-09-11 9:11 ` Benoit Cousson
2012-09-11 9:16 ` ABRAHAM, KISHON VIJAY
2012-09-11 10:01 ` Benoit Cousson
2012-09-11 10:19 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347345381-4390-4-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).