From: omar.luna@linaro.org (Omar Ramirez Luna)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/9] ARM: OMAP3/4: iommu: adapt to runtime pm
Date: Wed, 12 Sep 2012 14:45:48 -0500 [thread overview]
Message-ID: <1347479152-588-6-git-send-email-omar.luna@linaro.org> (raw)
In-Reply-To: <1347479152-588-1-git-send-email-omar.luna@linaro.org>
Use runtime PM functionality interfaced with hwmod enable/idle
functions, to replace direct clock operations and sysconfig
handling.
Dues to reset sequence, pm_runtime_put_sync must be used, to avoid
possible operations with the module under reset.
Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
---
arch/arm/mach-omap2/iommu2.c | 17 -----------
arch/arm/mach-omap2/omap-iommu.c | 1 -
arch/arm/plat-omap/include/plat/iommu.h | 2 --
arch/arm/plat-omap/include/plat/iommu2.h | 2 --
drivers/iommu/omap-iommu.c | 45 +++++++++++++-----------------
5 files changed, 19 insertions(+), 48 deletions(-)
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 35cab47..3e47786 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -25,15 +25,6 @@
*/
#define IOMMU_ARCH_VERSION 0x00000011
-/* SYSCONF */
-#define MMU_SYS_IDLE_SHIFT 3
-#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT)
-
-#define MMU_SYS_AUTOIDLE 1
-
/* IRQSTATUS & IRQENABLE */
#define MMU_IRQ_MULTIHITFAULT (1 << 4)
#define MMU_IRQ_TABLEWALKFAULT (1 << 3)
@@ -96,11 +87,6 @@ static int omap2_iommu_enable(struct omap_iommu *obj)
dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
(l >> 4) & 0xf, l & 0xf);
- l = iommu_read_reg(obj, MMU_SYSCONFIG);
- l &= ~MMU_SYS_IDLE_MASK;
- l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
- iommu_write_reg(obj, l, MMU_SYSCONFIG);
-
iommu_write_reg(obj, pa, MMU_TTB);
__iommu_set_twl(obj, true);
@@ -114,7 +100,6 @@ static void omap2_iommu_disable(struct omap_iommu *obj)
l &= ~MMU_CNTL_MASK;
iommu_write_reg(obj, l, MMU_CNTL);
- iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
}
@@ -243,8 +228,6 @@ omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len)
char *p = buf;
pr_reg(REVISION);
- pr_reg(SYSCONFIG);
- pr_reg(SYSSTATUS);
pr_reg(IRQSTATUS);
pr_reg(IRQENABLE);
pr_reg(WALKING_ST);
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 96eecd8..e8f88dc 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -32,7 +32,6 @@ static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
return -ENOMEM;
pdata->name = oh->name;
- pdata->clk_name = oh->main_clk;
pdata->nr_tlb_entries = a->nr_tlb_entries;
pdata->da_start = a->da_start;
pdata->da_end = a->da_end;
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index bb15b85..004cb9e 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -30,7 +30,6 @@ struct iotlb_entry {
struct omap_iommu {
const char *name;
struct module *owner;
- struct clk *clk;
void __iomem *regbase;
struct device *dev;
void *isr_priv;
@@ -120,7 +119,6 @@ struct omap_mmu_dev_attr {
struct iommu_platform_data {
const char *name;
- const char *clk_name;
const char *reset_name;
int nr_tlb_entries;
u32 da_start;
diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
index d4116b5..1579694 100644
--- a/arch/arm/plat-omap/include/plat/iommu2.h
+++ b/arch/arm/plat-omap/include/plat/iommu2.h
@@ -19,8 +19,6 @@
* MMU Register offsets
*/
#define MMU_REVISION 0x00
-#define MMU_SYSCONFIG 0x10
-#define MMU_SYSSTATUS 0x14
#define MMU_IRQSTATUS 0x18
#define MMU_IRQENABLE 0x1c
#define MMU_WALKING_ST 0x40
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index af8fe53..20ae946 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -16,11 +16,11 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/iommu.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
#include <asm/cacheflush.h>
@@ -142,11 +142,10 @@ static int iommu_enable(struct omap_iommu *obj)
}
}
- clk_enable(obj->clk);
+ pm_runtime_get_sync(obj->dev);
err = arch_iommu->enable(obj);
- clk_disable(obj->clk);
return err;
}
@@ -158,11 +157,9 @@ static void iommu_disable(struct omap_iommu *obj)
if (!obj || !pdata)
return;
- clk_enable(obj->clk);
-
arch_iommu->disable(obj);
- clk_disable(obj->clk);
+ pm_runtime_put_sync(obj->dev);
if (pdata->assert_reset)
pdata->assert_reset(pdev, pdata->reset_name);
@@ -288,7 +285,7 @@ static int load_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
if (!obj || !obj->nr_tlb_entries || !e)
return -EINVAL;
- clk_enable(obj->clk);
+ pm_runtime_get_sync(obj->dev);
iotlb_lock_get(obj, &l);
if (l.base == obj->nr_tlb_entries) {
@@ -318,7 +315,7 @@ static int load_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
cr = iotlb_alloc_cr(obj, e);
if (IS_ERR(cr)) {
- clk_disable(obj->clk);
+ pm_runtime_put_sync(obj->dev);
return PTR_ERR(cr);
}
@@ -332,7 +329,7 @@ static int load_iotlb_entry(struct omap_iommu *obj, struct iotlb_entry *e)
l.vict = l.base;
iotlb_lock_set(obj, &l);
out:
- clk_disable(obj->clk);
+ pm_runtime_put_sync(obj->dev);
return err;
}
@@ -362,7 +359,7 @@ static void flush_iotlb_page(struct omap_iommu *obj, u32 da)
int i;
struct cr_regs cr;
- clk_enable(obj->clk);
+ pm_runtime_get_sync(obj->dev);
for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) {
u32 start;
@@ -381,7 +378,7 @@ static void flush_iotlb_page(struct omap_iommu *obj, u32 da)
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}
- clk_disable(obj->clk);
+ pm_runtime_put_sync(obj->dev);
if (i == obj->nr_tlb_entries)
dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
@@ -395,7 +392,7 @@ static void flush_iotlb_all(struct omap_iommu *obj)
{
struct iotlb_lock l;
- clk_enable(obj->clk);
+ pm_runtime_get_sync(obj->dev);
l.base = 0;
l.vict = 0;
@@ -403,7 +400,7 @@ static void flush_iotlb_all(struct omap_iommu *obj)
iommu_write_reg(obj, 1, MMU_GFLUSH);
- clk_disable(obj->clk);
+ pm_runtime_put_sync(obj->dev);
}
#if defined(CONFIG_OMAP_IOMMU_DEBUG) || defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
@@ -413,11 +410,11 @@ ssize_t omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t bytes)
if (!obj || !buf)
return -EINVAL;
- clk_enable(obj->clk);
+ pm_runtime_get_sync(obj->dev);
bytes = arch_iommu->dump_ctx(obj, buf, bytes);
- clk_disable(obj->clk);
+ pm_runtime_put_sync(obj->dev);
return bytes;
}
@@ -431,7 +428,7 @@ __dump_tlb_entries(struct omap_iommu *obj, struct cr_regs *crs, int num)
struct cr_regs tmp;
struct cr_regs *p = crs;
- clk_enable(obj->clk);
+ pm_runtime_get_sync(obj->dev);
iotlb_lock_get(obj, &saved);
for_each_iotlb_cr(obj, num, i, tmp) {
@@ -441,7 +438,7 @@ __dump_tlb_entries(struct omap_iommu *obj, struct cr_regs *crs, int num)
}
iotlb_lock_set(obj, &saved);
- clk_disable(obj->clk);
+ pm_runtime_put_sync(obj->dev);
return p - crs;
}
@@ -798,9 +795,7 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
if (!obj->refcount)
return IRQ_NONE;
- clk_enable(obj->clk);
errs = iommu_report_fault(obj, &da);
- clk_disable(obj->clk);
if (errs == 0)
return IRQ_HANDLED;
@@ -926,10 +921,6 @@ static int __devinit omap_iommu_probe(struct platform_device *pdev)
if (!obj)
return -ENOMEM;
- obj->clk = clk_get(&pdev->dev, pdata->clk_name);
- if (IS_ERR(obj->clk))
- goto err_clk;
-
obj->nr_tlb_entries = pdata->nr_tlb_entries;
obj->name = pdata->name;
obj->dev = &pdev->dev;
@@ -972,6 +963,9 @@ static int __devinit omap_iommu_probe(struct platform_device *pdev)
goto err_irq;
platform_set_drvdata(pdev, obj);
+ pm_runtime_irq_safe(obj->dev);
+ pm_runtime_enable(obj->dev);
+
dev_info(&pdev->dev, "%s registered\n", obj->name);
return 0;
@@ -980,8 +974,6 @@ err_irq:
err_ioremap:
release_mem_region(res->start, resource_size(res));
err_mem:
- clk_put(obj->clk);
-err_clk:
kfree(obj);
return err;
}
@@ -1002,7 +994,8 @@ static int __devexit omap_iommu_remove(struct platform_device *pdev)
release_mem_region(res->start, resource_size(res));
iounmap(obj->regbase);
- clk_put(obj->clk);
+ pm_runtime_disable(obj->dev);
+
dev_info(&pdev->dev, "%s removed\n", obj->name);
kfree(obj);
return 0;
--
1.7.9.5
next prev parent reply other threads:[~2012-09-12 19:45 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-12 19:45 [PATCH v2 0/9] OMAP: iommu: hwmod, reset handling and runtime PM Omar Ramirez Luna
2012-09-12 19:45 ` [PATCH v2 1/9] ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected Omar Ramirez Luna
2012-09-19 9:35 ` Laurent Pinchart
2012-09-19 21:01 ` Paul Walmsley
2012-09-12 19:45 ` [PATCH v2 2/9] ARM: OMAP3: hwmod data: add mmu data for iva and isp Omar Ramirez Luna
2012-09-19 21:35 ` Paul Walmsley
2012-09-21 0:30 ` Paul Walmsley
2012-09-12 19:45 ` [PATCH v2 3/9] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp Omar Ramirez Luna
2012-09-19 20:59 ` Paul Walmsley
2012-09-19 21:20 ` Cousson, Benoit
2012-09-19 21:31 ` Paul Walmsley
2012-09-12 19:45 ` [PATCH v2 4/9] ARM: OMAP3/4: iommu: migrate to hwmod framework Omar Ramirez Luna
2012-09-12 19:45 ` Omar Ramirez Luna [this message]
2012-09-12 19:45 ` [PATCH v2 6/9] ARM: OMAP: iommu: pm runtime save and restore context Omar Ramirez Luna
2012-09-12 19:45 ` [PATCH v2 7/9] ARM: OMAP: iommu: optimize save and restore routines Omar Ramirez Luna
2012-09-18 18:04 ` Tony Lindgren
2012-09-19 0:53 ` Omar Ramirez Luna
2012-09-12 19:45 ` [PATCH v2 8/9] ARM: OMAP: iommu: add device tree support Omar Ramirez Luna
2012-10-02 21:25 ` Matt Porter
2012-10-03 21:13 ` Omar Ramirez Luna
2012-09-12 19:45 ` [PATCH v2 9/9] arm/dts: OMAP3/4: Add iommu nodes Omar Ramirez Luna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347479152-588-6-git-send-email-omar.luna@linaro.org \
--to=omar.luna@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).