From: vbyravarasu@nvidia.com (Venu Byravarasu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: tegra: dt: Add pinmux entries for Vbus regulator controls
Date: Fri, 14 Sep 2012 14:55:54 +0530 [thread overview]
Message-ID: <1347614754-26357-1-git-send-email-vbyravarasu@nvidia.com> (raw)
Adding pinmux entries for PI4 and PH7 to enable Vbus for USB1
and USB3 controllers on Cardhu A02 board.
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
---
arch/arm/boot/dts/tegra30-cardhu-a02.dts | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index dd4222f..b76ad31 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -8,6 +8,26 @@
model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+ pinmux {
+ gmi_rst_n_pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,open-drain = <1>;
+ nvidia,pull = <0>;
+ };
+
+ gmi_ad15_ph7 {
+ nvidia,pins = "gmi_ad15_ph7";
+ nvidia,function = "gmi";
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,open-drain = <1>;
+ nvidia,pull = <0>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
--
1.7.1.1
next reply other threads:[~2012-09-14 9:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-14 9:25 Venu Byravarasu [this message]
2012-09-14 14:15 ` [PATCH] arm: tegra: dt: Add pinmux entries for Vbus regulator controls Laxman Dewangan
2012-09-14 15:31 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347614754-26357-1-git-send-email-vbyravarasu@nvidia.com \
--to=vbyravarasu@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox