From mboxrd@z Thu Jan 1 00:00:00 1970 From: stefano.stabellini@eu.citrix.com (Stefano Stabellini) Date: Mon, 17 Sep 2012 18:38:52 +0100 Subject: [PATCH v5 06/17] docs: Xen ARM DT bindings In-Reply-To: References: Message-ID: <1347903543-2135-6-git-send-email-stefano.stabellini@eu.citrix.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add a doc to describe the Xen ARM device tree bindings Changes in v5: - add a comment about the size of the grant table memory region; - add a comment about the required presence of a GIC node; - specify that the described properties are part of a top-level "hypervisor" node; - specify #address-cells and #size-cells for the example. Changes in v4: - "xen,xen" should be last as it is less specific; - update reg property using 2 address-cells and 2 size-cells. Signed-off-by: Stefano Stabellini CC: devicetree-discuss at lists.ozlabs.org CC: David Vrabel CC: Rob Herring CC: Dave Martin --- Documentation/devicetree/bindings/arm/xen.txt | 25 +++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/xen.txt diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt new file mode 100644 index 0000000..0f7b9c2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -0,0 +1,25 @@ +* Xen hypervisor device tree bindings + +Xen ARM virtual platforms shall have a top-level "hypervisor" node with +the following properties: + +- compatible: + compatible = "xen,xen-", "xen,xen"; + where is the version of the Xen ABI of the platform. + +- reg: specifies the base physical address and size of a region in + memory where the grant table should be mapped to, using an + HYPERVISOR_memory_op hypercall. The memory region is large enough to map + the whole grant table (it is larger or equal to gnttab_max_grant_frames()). + +- interrupts: the interrupt used by Xen to inject event notifications. + A GIC node is also required. + + +Example (assuming #address-cells = <2> and #size-cells = <2>): + +hypervisor { + compatible = "xen,xen-4.3", "xen,xen"; + reg = <0 0xb0000000 0 0x20000>; + interrupts = <1 15 0xf08>; +}; -- 1.7.2.5