linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jean.pihet@newoldbits.com (Jean Pihet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] ARM: OMAP: omap_device: register to the per-device PM QoS framework
Date: Tue, 18 Sep 2012 10:52:07 +0200	[thread overview]
Message-ID: <1347958332-2205-4-git-send-email-j-pihet@ti.com> (raw)
In-Reply-To: <1347958332-2205-1-git-send-email-j-pihet@ti.com>

Implement the devices wake-up latency constraints using the global
device PM QoS notification handler which applies the constraints to the
underlying layer by calling the corresponding function at hwmod level.

Reworked after Paul's suggestions.

Tested on OMAP3 Beagleboard and OMAP4 Pandaboard in RET/OFF using wake-up
latency constraints on MPU, CORE and PER.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/omap_device.c |   81 +++++++++++++++++++++++++++++++++++++-
 1 files changed, 80 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index c490240..011825f 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -3,6 +3,7 @@
  * omap_device implementation
  *
  * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Paul Walmsley, Kevin Hilman
  *
  * Developed in collaboration with (alphabetical order): Benoit
@@ -89,6 +90,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/notifier.h>
+#include <linux/pm_qos.h>
 
 #include <plat/omap_device.h>
 #include <plat/omap_hwmod.h>
@@ -401,6 +403,72 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
+/**
+ * _omap_device_pm_qos_handler - interface to the per-device PM QoS framework
+ * @nb: pointer to omap_device_pm_qos_nb (not used)
+ * @new_value: new maximum wakeup latency constraint for @req->dev (in us)
+ * @req: struct dev_pm_qos_request * passed by the Linux PM QoS code
+ *
+ * Called by the Linux core device PM QoS code to alter the maximum
+ * wakeup latency constraint on a device.  If the underlying device is
+ * an omap_device, then this code will pass the constraint on to the
+ * underlying hwmods.  Returns -EINVAL if this code can't handle the
+ * constraint for some reason, or passes along the return code from the
+ * hwmod wakeup latency constraint functions.
+ */
+static int _omap_device_pm_qos_handler(struct notifier_block *nb,
+				       unsigned long new_value,
+				       void *req)
+{
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+	struct dev_pm_qos_request *dev_pm_qos_req = req;
+	int ret = NOTIFY_OK;
+	int r, i;
+
+	pr_debug("OMAP PM constraints: req at 0x%p, new_value=%lu\n",
+		 req, new_value);
+
+	/* Look for the platform device for the constraint target device */
+	pdev = to_platform_device(dev_pm_qos_req->dev);
+
+	/* Try to catch non platform devices */
+	if (pdev->name == NULL) {
+		pr_err("%s: Error: platform device for device %s not valid\n",
+		       __func__, dev_name(dev_pm_qos_req->dev));
+		return NOTIFY_DONE;
+	}
+
+	/* Find the associated omap_device for dev */
+	od = to_omap_device(pdev);
+	if (od == NULL) {
+		pr_err("%s: Error: no omap_device for device %s\n",
+		       __func__, dev_name(dev_pm_qos_req->dev));
+		return NOTIFY_DONE;
+	}
+
+	pr_debug("OMAP PM constraints: req at 0x%p, dev=0x%p, new_value=%lu\n",
+		 req, dev_pm_qos_req->dev, new_value);
+
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		oh = od->hwmods[i];
+		if (new_value == PM_QOS_DEV_LAT_DEFAULT_VALUE)
+			r = omap_hwmod_remove_wakeuplat_constraint(
+							oh,
+							dev_pm_qos_req);
+		else
+			r = omap_hwmod_set_wakeuplat_constraint(
+							oh,
+							dev_pm_qos_req,
+							new_value);
+
+		if (!r)
+			ret = NOTIFY_BAD;
+	}
+
+	return ret;
+}
 
 /* Public functions for use by core code */
 
@@ -1115,13 +1183,24 @@ int omap_device_enable_clocks(struct omap_device *od)
 	return 0;
 }
 
+static struct notifier_block omap_device_pm_qos_nb = {
+	.notifier_call = _omap_device_pm_qos_handler,
+};
+
 static struct notifier_block platform_nb = {
 	.notifier_call = _omap_device_notifier_call,
 };
 
 static int __init omap_device_init(void)
 {
+	int ret;
+
 	bus_register_notifier(&platform_bus_type, &platform_nb);
-	return 0;
+
+	ret = dev_pm_qos_add_global_notifier(&omap_device_pm_qos_nb);
+	if (ret)
+		pr_err("omap_device: cannot add global notifier for dev PM QoS\n");
+
+	return ret;
 }
 core_initcall(omap_device_init);
-- 
1.7.7.6

  parent reply	other threads:[~2012-09-18  8:52 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-18  8:52 [PATCH v9 0/8] PM QoS: implement the OMAP low level constraints management code Jean Pihet
2012-09-18  8:52 ` [PATCH 1/8] ARM: OMAP2+: PM QoS: control the power domains next state from the constraints Jean Pihet
2012-12-11  0:05   ` Paul Walmsley
2012-12-14 15:50     ` Jean Pihet
2012-09-18  8:52 ` [PATCH 2/8] ARM: OMAP2+: hwmod: manage the wake-up latency constraints Jean Pihet
2012-09-18  8:52 ` Jean Pihet [this message]
2012-09-18  8:52 ` [PATCH 4/8] ARM: OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints Jean Pihet
2012-09-18  8:52 ` [PATCH 5/8] ARM: OMAP3: update cpuidle latency and threshold figures Jean Pihet
2012-09-18  8:52 ` [PATCH 6/8] ARM: OMAP3: powerdomain data: add wake-up latency figures Jean Pihet
2012-09-18  8:52 ` [PATCH 7/8] ARM: OMAP: convert I2C driver to PM QoS for latency constraints Jean Pihet
2012-09-18  8:53   ` Felipe Balbi
2012-09-19 18:11   ` Shubhrajyoti
2012-09-19 18:34     ` Jean Pihet
2012-09-18  8:52 ` [PATCH 8/8] ARM: OMAP: PM: remove the latency related functions from the API Jean Pihet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1347958332-2205-4-git-send-email-j-pihet@ti.com \
    --to=jean.pihet@newoldbits.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).